?? zong.fit
字號:
-- MAX+plus II Compiler Fit File
-- Version 10.2 07/10/2002
-- Compiled: 12/18/2005 12:23:52
-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera. Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner. Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors. No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.
CHIP "zong"
BEGIN
DEVICE = "EPF10K10LC84-3";
"cp1" : INPUT_PIN = 1 ;
"cp2" : INPUT_PIN = 43 ;
"reset" : INPUT_PIN = 44 ;
"speed1" : INPUT_PIN = 61 ;
"speed2" : INPUT_PIN = 62 ;
"speed3" : INPUT_PIN = 84 ;
"start" : INPUT_PIN = 2 ;
"stop" : INPUT_PIN = 42 ;
"l0" : OUTPUT_PIN = 19 ;
"l1" : OUTPUT_PIN = 29 ;
"l2" : OUTPUT_PIN = 60 ;
"l3" : OUTPUT_PIN = 7 ;
"l4" : OUTPUT_PIN = 27 ;
"l5" : OUTPUT_PIN = 17 ;
"l6" : OUTPUT_PIN = 16 ;
"l7" : OUTPUT_PIN = 8 ;
"y0" : OUTPUT_PIN = 83 ;
"y1" : OUTPUT_PIN = 47 ;
"y2" : OUTPUT_PIN = 69 ;
"y3" : OUTPUT_PIN = 70 ;
"y4" : OUTPUT_PIN = 71 ;
"y5" : OUTPUT_PIN = 72 ;
"y6" : OUTPUT_PIN = 24 ;
"|BUFU1:12|LPM_ADD_SUB:132|addcore:adder|:55" : LOCATION = LC1_C9 ;
"|BUFU1:12|LPM_ADD_SUB:191|addcore:adder|:55" : LOCATION = LC4_C5 ;
"|BUFU1:12|LPM_ADD_SUB:191|addcore:adder|:59" : LOCATION = LC6_C5 ;
"|BUFU1:12|:4" : LOCATION = LC7_C5 ;
"|BUFU1:12|:6" : LOCATION = LC8_C5 ; -- |BUFU1:12|shi3
"|BUFU1:12|:7" : LOCATION = LC5_C5 ; -- |BUFU1:12|shi2
"|BUFU1:12|:8" : LOCATION = LC3_C5 ; -- |BUFU1:12|shi1
"|BUFU1:12|:9" : LOCATION = LC2_C5 ; -- |BUFU1:12|shi0
"|BUFU1:12|:10" : LOCATION = LC8_C9 ; -- |BUFU1:12|bai3
"|BUFU1:12|:11" : LOCATION = LC5_C9 ; -- |BUFU1:12|bai2
"|BUFU1:12|:12" : LOCATION = LC1_C10; -- |BUFU1:12|bai1
"|BUFU1:12|:13" : LOCATION = LC4_C9 ; -- |BUFU1:12|bai0
"|BUFU1:12|:89" : LOCATION = LC1_C5 ;
"|BUFU1:12|:107" : LOCATION = LC2_C9 ;
"|BUFU1:12|:234" : LOCATION = LC7_C9 ;
"|BUFU1:12|~234~1" : LOCATION = LC6_C9 ;
"|BUFU1:12|:240" : LOCATION = LC3_C9 ;
"|BUFU1:12|:246" : LOCATION = LC2_C10;
"|CONTROL:15|LPM_ADD_SUB:81|addcore:adder|:79" : LOCATION = LC4_C17;
"|CONTROL:15|LPM_ADD_SUB:81|addcore:adder|:83" : LOCATION = LC7_C17;
"|CONTROL:15|LPM_ADD_SUB:81|addcore:adder|:91" : LOCATION = LC1_C17;
"|CONTROL:15|LPM_ADD_SUB:81|addcore:adder|:95" : LOCATION = LC4_C19;
"|CONTROL:15|LPM_ADD_SUB:81|addcore:adder|:103" : LOCATION = LC6_C19;
"|CONTROL:15|:8" : LOCATION = LC1_C18;
"|CONTROL:15|:12" : LOCATION = LC2_C19; -- |CONTROL:15|q9
"|CONTROL:15|:13" : LOCATION = LC7_C19; -- |CONTROL:15|q8
"|CONTROL:15|:14" : LOCATION = LC5_C19; -- |CONTROL:15|q7
"|CONTROL:15|:15" : LOCATION = LC3_C19; -- |CONTROL:15|q6
"|CONTROL:15|:16" : LOCATION = LC1_C19; -- |CONTROL:15|q5
"|CONTROL:15|:17" : LOCATION = LC8_C17; -- |CONTROL:15|q4
"|CONTROL:15|:18" : LOCATION = LC6_C17; -- |CONTROL:15|q3
"|CONTROL:15|:19" : LOCATION = LC5_C17; -- |CONTROL:15|q2
"|CONTROL:15|:20" : LOCATION = LC2_C17; -- |CONTROL:15|q1
"|CONTROL:15|:21" : LOCATION = LC3_C17; -- |CONTROL:15|q0
"|CONTROL:15|:256" : LOCATION = LC2_C18;
"|CONTROL:15|:269" : LOCATION = LC3_C18;
"|CONTROL:15|:437" : LOCATION = LC1_C7 ;
"|CONTROL:15|:443" : LOCATION = LC2_B11;
"|CONTROL:15|~443~1" : LOCATION = LC6_A7 ;
"|dongxian:1|LX8:3|:306" : LOCATION = LC8_A3 ;
"|dongxian:1|M8:4|:6" : LOCATION = LC6_A3 ; -- |dongxian:1|M8:4|qo2
"|dongxian:1|M8:4|:7" : LOCATION = LC2_A3 ; -- |dongxian:1|M8:4|qo1
"|dongxian:1|M8:4|:8" : LOCATION = LC1_A21; -- |dongxian:1|M8:4|qo0
"|dongxian:1|SELECT48:1|:107" : LOCATION = LC6_A10;
"|dongxian:1|SELECT48:1|:114" : LOCATION = LC5_A3 ;
"|dongxian:1|SELECT48:1|:121" : LOCATION = LC4_A3 ;
"|dongxian:1|SELECT48:1|:128" : LOCATION = LC7_A3 ;
"|dongxian:1|SELECT48:1|:135" : LOCATION = LC1_A3 ;
"|dongxian:1|SELECT48:1|:142" : LOCATION = LC3_A3 ;
"|dongxian:1|SELECT48:1|:149" : LOCATION = LC1_A10;
"|dongxian:1|SELECT48:1|:156" : LOCATION = LC3_A10;
"|dongxian:1|SELECT48:1|:297" : LOCATION = LC2_A1 ;
"|dongxian:1|SELECT48:1|:303" : LOCATION = LC3_A1 ;
"|dongxian:1|SELECT48:1|:309" : LOCATION = LC5_A1 ;
"|dongxian:1|SELECT48:1|:321" : LOCATION = LC6_A1 ;
"|dongxian:1|SELECT48:1|:327" : LOCATION = LC7_A1 ;
"|dongxian:1|SELECT48:1|:333" : LOCATION = LC8_A1 ;
"|dongxian:1|SELECT48:1|:339" : LOCATION = LC1_A1 ;
"|dongxian:1|SELECT48:1|:345" : LOCATION = LC2_A12;
"|dongxian:1|SELECT48:1|:348" : LOCATION = LC3_A12;
"|dongxian:1|SELECT48:1|:351" : LOCATION = LC1_A12;
"|dongxian:1|SELECT48:1|:357" : LOCATION = LC6_C6 ;
"|dongxian:1|SELECT48:1|:360" : LOCATION = LC1_C6 ;
"|dongxian:1|SELECT48:1|:363" : LOCATION = LC8_A6 ;
"|dongxian:1|SELECT48:1|:366" : LOCATION = LC4_A6 ;
"|dongxian:1|SELECT48:1|:372" : LOCATION = LC7_A10;
"|dongxian:1|SELECT48:1|:375" : LOCATION = LC8_A10;
"|dongxian:1|SELECT48:1|:378" : LOCATION = LC2_A10;
"|dongxian:1|SELECT48:1|:384" : LOCATION = LC2_C6 ;
"|dongxian:1|SELECT48:1|:387" : LOCATION = LC4_C10;
"|dongxian:1|SELECT48:1|:390" : LOCATION = LC7_C10;
"|dongxian:1|SELECT48:1|:393" : LOCATION = LC5_A10;
"|dongxian:1|SELECT48:1|:399" : LOCATION = LC3_A5 ;
"|dongxian:1|SELECT48:1|:402" : LOCATION = LC4_A5 ;
"|dongxian:1|SELECT48:1|:405" : LOCATION = LC5_A5 ;
"|dongxian:1|SELECT48:1|:411" : LOCATION = LC7_A5 ;
"|dongxian:1|SELECT48:1|:414" : LOCATION = LC8_A5 ;
"|dongxian:1|SELECT48:1|:417" : LOCATION = LC1_A5 ;
"|dongxian:1|SELECT48:1|:420" : LOCATION = LC2_A4 ;
"|dongxian:1|VB48:2|:383" : LOCATION = LC6_A13;
"|dongxian:1|VB48:2|:416" : LOCATION = LC3_A13;
"|dongxian:1|VB48:2|:449" : LOCATION = LC4_A13;
"|dongxian:1|VB48:2|:482" : LOCATION = LC5_A13;
"|dongxian:1|VB48:2|:515" : LOCATION = LC8_A13;
"|dongxian:1|VB48:2|:548" : LOCATION = LC1_A13;
"|dongxian:1|VB48:2|:583" : LOCATION = LC7_A13;
"|LICHENGJI0:14|LPM_ADD_SUB:66|addcore:adder|:55" : LOCATION = LC3_C11;
"|LICHENGJI0:14|LPM_ADD_SUB:66|addcore:adder|:59" : LOCATION = LC4_C11;
"|LICHENGJI0:14|:4" : LOCATION = LC1_C11;
"|LICHENGJI0:14|:10" : LOCATION = LC5_C11; -- |LICHENGJI0:14|shifen3
"|LICHENGJI0:14|:11" : LOCATION = LC8_C11; -- |LICHENGJI0:14|shifen2
"|LICHENGJI0:14|:12" : LOCATION = LC6_C11; -- |LICHENGJI0:14|shifen1
"|LICHENGJI0:14|:13" : LOCATION = LC7_C11; -- |LICHENGJI0:14|shifen0
"|LICHENGJI0:14|:75" : LOCATION = LC2_C11;
"|LICHENGJI1:13|LPM_ADD_SUB:159|addcore:adder|:55" : LOCATION = LC6_A2 ;
"|LICHENGJI1:13|LPM_ADD_SUB:218|addcore:adder|:59" : LOCATION = LC7_A8 ;
"|LICHENGJI1:13|LPM_ADD_SUB:218|addcore:adder|:68" : LOCATION = LC5_A6 ;
"|LICHENGJI1:13|:4" : LOCATION = LC5_A8 ;
"|LICHENGJI1:13|:14" : LOCATION = LC3_A2 ; -- |LICHENGJI1:13|shi3
"|LICHENGJI1:13|:15" : LOCATION = LC1_A2 ; -- |LICHENGJI1:13|shi2
"|LICHENGJI1:13|:16" : LOCATION = LC2_A2 ; -- |LICHENGJI1:13|shi1
"|LICHENGJI1:13|:17" : LOCATION = LC5_A4 ; -- |LICHENGJI1:13|shi0
"|LICHENGJI1:13|:18" : LOCATION = LC8_A8 ; -- |LICHENGJI1:13|ge3
"|LICHENGJI1:13|:19" : LOCATION = LC3_A6 ; -- |LICHENGJI1:13|ge2
"|LICHENGJI1:13|:20" : LOCATION = LC6_A8 ; -- |LICHENGJI1:13|ge1
"|LICHENGJI1:13|:21" : LOCATION = LC3_A8 ; -- |LICHENGJI1:13|ge0
"|LICHENGJI1:13|:116" : LOCATION = LC1_A8 ;
"|LICHENGJI1:13|:134" : LOCATION = LC8_A2 ;
"|LICHENGJI1:13|:261" : LOCATION = LC7_A2 ;
"|LICHENGJI1:13|~261~1" : LOCATION = LC1_A6 ;
"|LICHENGJI1:13|:267" : LOCATION = LC5_A2 ;
"|LICHENGJI1:13|:273" : LOCATION = LC4_A2 ;
"|LICHENGJI1:13|:285" : LOCATION = LC2_A8 ;
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -