----------------------------------------------------------------------------------     This file is owned and controlled by Xilinx and must be used           ----     solely for design, simulation, implementation and creation of          ----     design files limited to Xilinx devices or technologies. Use            ----     with non-Xilinx devices or technologies is expressly prohibited        ----     and immediately terminates your license.                               ----                                                                            ----     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS"          ----     SOLELY FOR USE IN DEVELOPING PROGRAMS AND SOLUTIONS FOR                ----     XILINX DEVICES.  BY PROVIDING THIS DESIGN, CODE, OR INFORMATION        ----     AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION            ----     OR STANDARD, XILINX IS MAKING NO REPRESENTATION THAT THIS              ----     IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT,                ----     AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE       ----     FOR YOUR IMPLEMENTATION.  XILINX EXPRESSLY DISCLAIMS ANY               ----     WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE                ----     IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR         ----     REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF        ----     INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS        ----     FOR A PARTICULAR PURPOSE.                                              ----                                                                            ----     Xilinx products are not intended for use in life support               ----     appliances, devices, or systems. Use in such applications are          ----     expressly prohibited.                                                  ----                                                                            ----     (c) Copyright 1995-2003 Xilinx, Inc.                                   ----     All rights reserved.                                                   ------------------------------------------------------------------------------------ You must compile the wrapper file q_rom.vhd when simulating-- the core, q_rom. When compiling the wrapper file, be sure to-- reference the XilinxCoreLib VHDL simulation library. For detailed-- instructions, please refer to the "CORE Generator Guide".-- The synopsys directives "translate_off/translate_on" specified-- below are supported by XST, FPGA Compiler II, Mentor Graphics and Synplicity-- synthesis tools. Ensure they are correct for your synthesis tool(s).-- synopsys translate_offLIBRARY ieee;USE ieee.std_logic_1164.ALL;Library XilinxCoreLib;ENTITY q_rom IS	port (	addr: IN std_logic_VECTOR(8 downto 0);	clk: IN std_logic;	dout: OUT std_logic_VECTOR(12 downto 0));END q_rom;ARCHITECTURE q_rom_a OF q_rom IScomponent wrapped_q_rom	port (	addr: IN std_logic_VECTOR(8 downto 0);	clk: IN std_logic;	dout: OUT std_logic_VECTOR(12 downto 0));end component;-- Configuration specification 	for all : wrapped_q_rom use entity XilinxCoreLib.blkmemsp_v5_0(behavioral)		generic map(			c_sinit_value => "0",			c_reg_inputs => 0,			c_yclk_is_rising => 1,			c_has_en => 0,			c_ysinit_is_high => 1,			c_ywe_is_high => 1,			c_ytop_addr => "1024",			c_yprimitive_type => "16kx1",			c_yhierarchy => "hierarchy1",			c_has_rdy => 0,			c_has_limit_data_pitch => 0,			c_write_mode => 0,			c_width => 13,			c_yuse_single_primitive => 0,			c_has_nd => 0,			c_enable_rlocs => 0,			c_has_we => 0,			c_has_rfd => 0,			c_has_din => 0,			c_ybottom_addr => "0",			c_pipe_stages => 0,			c_yen_is_high => 1,			c_depth => 384,			c_has_default_data => 0,			c_limit_data_pitch => 18,			c_has_sinit => 0,			c_mem_init_file => "q_rom.mif",			c_default_data => "0",			c_ymake_bmm => 0,			c_addr_width => 9);BEGINU0 : wrapped_q_rom		port map (			addr => addr,			clk => clk,			dout => dout);END q_rom_a;-- synopsys translate_on