{ "Info" "IQEXE_SEPARATOR" "" "Info: *******************************************************************" {  } {  } 3 0 "*******************************************************************" 0 0 "" 0}
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Fitter Quartus II " "Info: Running Quartus II Fitter" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 7.2 Build 151 09/26/2007 SJ Full Version " "Info: Version 7.2 Build 151 09/26/2007 SJ Full Version" {  } {  } 0 0 "%1!s!" 0 0 "" 0} { "Info" "IQEXE_START_BANNER_TIME" "Tue May 19 16:19:44 2009 " "Info: Processing started: Tue May 19 16:19:44 2009" {  } {  } 0 0 "Processing started: %1!s!" 0 0 "" 0}  } {  } 4 0 "Running %2!s! %1!s!" 0 0 "" 0}
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_fit --read_settings_files=off --write_settings_files=off DIP_PB_Counter -c DIP_PB_Counter " "Info: Command: quartus_fit --read_settings_files=off --write_settings_files=off DIP_PB_Counter -c DIP_PB_Counter" {  } {  } 0 0 "Command: %1!s!" 0 0 "" 0}
{ "Info" "IMPP_MPP_USER_DEVICE" "DIP_PB_Counter EP1C6Q240C8 " "Info: Selected device EP1C6Q240C8 for design \"DIP_PB_Counter\"" {  } {  } 0 0 "Selected device %2!s! for design \"%1!s!\"" 0 0 "" 0}
{ "Info" "IFITCC_FITCC_INFO_AUTO_FIT_COMPILATION_ON" "" "Info: Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" {  } {  } 0 0 "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" 0 0 "" 0}
{ "Info" "IFITCC_FITCC_QID_PARTITION_BACK_ANNOTATION_TOP" "1 0 " "Info: The Fitter has identified 1 logical partitions of which 0 have a previous placement to use" { { "Info" "IFITCC_FITCC_QID_PARTITION_BACK_ANNOTATION_NONE_OVERRIDE" "57 Top " "Info: Previous placement does not exist for 57 of 57 atoms in partition Top" {  } {  } 0 0 "Previous placement does not exist for %1!d! of %1!d! atoms in partition %2!s!" 0 0 "" 0}  } {  } 0 0 "The Fitter has identified %1!d! logical partitions of which %2!d! have a previous placement to use" 0 0 "" 0}
{ "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED" "" "Info: Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" { { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EP1C12Q240C8 " "Info: Device EP1C12Q240C8 is compatible" {  } {  } 2 0 "Device %1!s! is compatible" 0 0 "" 0}  } {  } 2 0 "Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" 0 0 "" 0}
{ "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION" "2 " "Info: Fitter converted 2 user pins into dedicated programming pins" { { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~nCSO~ 24 " "Info: Pin ~nCSO~ is reserved at location 24" {  } { { "c:/altera/72/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/altera/72/quartus/bin/pin_planner.ppl" { ~nCSO~ } } } { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { ~nCSO~ } "NODE_NAME" } } { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { ~nCSO~ } "NODE_NAME" } }  } 0 0 "Pin %1!s! is reserved at location %2!s!" 0 0 "" 0} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ASDO~ 37 " "Info: Pin ~ASDO~ is reserved at location 37" {  } { { "c:/altera/72/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/altera/72/quartus/bin/pin_planner.ppl" { ~ASDO~ } } } { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { ~ASDO~ } "NODE_NAME" } } { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { ~ASDO~ } "NODE_NAME" } }  } 0 0 "Pin %1!s! is reserved at location %2!s!" 0 0 "" 0}  } {  } 0 0 "Fitter converted %1!d! user pins into dedicated programming pins" 0 0 "" 0}
{ "Warning" "WFIOMGR_PINS_MISSING_LOCATION_INFO" "8 8 " "Warning: No exact pin location assignment(s) for 8 pins of 8 total pins" { { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "Led_inv\[0\] " "Info: Pin Led_inv\[0\] not assigned to an exact location on the device" {  } { { "c:/altera/72/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/altera/72/quartus/bin/pin_planner.ppl" { Led_inv[0] } } } { "DIP_PB_Counter.vhd" "" { Text "E:/專業/EDA/實驗/DIP_PB_Counter/DIP_PB_Counter.vhd" 32 -1 0 } } { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { Led_inv[0] } "NODE_NAME" } } { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { Led_inv[0] } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0 "" 0} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "Led_inv\[1\] " "Info: Pin Led_inv\[1\] not assigned to an exact location on the device" {  } { { "c:/altera/72/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/altera/72/quartus/bin/pin_planner.ppl" { Led_inv[1] } } } { "DIP_PB_Counter.vhd" "" { Text "E:/專業/EDA/實驗/DIP_PB_Counter/DIP_PB_Counter.vhd" 32 -1 0 } } { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { Led_inv[1] } "NODE_NAME" } } { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { Led_inv[1] } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0 "" 0} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "Led_inv\[2\] " "Info: Pin Led_inv\[2\] not assigned to an exact location on the device" {  } { { "c:/altera/72/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/altera/72/quartus/bin/pin_planner.ppl" { Led_inv[2] } } } { "DIP_PB_Counter.vhd" "" { Text "E:/專業/EDA/實驗/DIP_PB_Counter/DIP_PB_Counter.vhd" 32 -1 0 } } { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { Led_inv[2] } "NODE_NAME" } } { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { Led_inv[2] } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0 "" 0} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "Led_inv\[3\] " "Info: Pin Led_inv\[3\] not assigned to an exact location on the device" {  } { { "c:/altera/72/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/altera/72/quartus/bin/pin_planner.ppl" { Led_inv[3] } } } { "DIP_PB_Counter.vhd" "" { Text "E:/專業/EDA/實驗/DIP_PB_Counter/DIP_PB_Counter.vhd" 32 -1 0 } } { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { Led_inv[3] } "NODE_NAME" } } { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { Led_inv[3] } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0 "" 0} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "clk " "Info: Pin clk not assigned to an exact location on the device" {  } { { "c:/altera/72/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/altera/72/quartus/bin/pin_planner.ppl" { clk } } } { "DIP_PB_Counter.vhd" "" { Text "E:/專業/EDA/實驗/DIP_PB_Counter/DIP_PB_Counter.vhd" 28 -1 0 } } { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { clk } "NODE_NAME" } } { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { clk } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0 "" 0} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "reset_b " "Info: Pin reset_b not assigned to an exact location on the device" {  } { { "c:/altera/72/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/altera/72/quartus/bin/pin_planner.ppl" { reset_b } } } { "DIP_PB_Counter.vhd" "" { Text "E:/專業/EDA/實驗/DIP_PB_Counter/DIP_PB_Counter.vhd" 29 -1 0 } } { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { reset_b } "NODE_NAME" } } { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { reset_b } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0 "" 0} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "PBSwitch " "Info: Pin PBSwitch not assigned to an exact location on the device" {  } { { "c:/altera/72/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/altera/72/quartus/bin/pin_planner.ppl" { PBSwitch } } } { "DIP_PB_Counter.vhd" "" { Text "E:/專業/EDA/實驗/DIP_PB_Counter/DIP_PB_Counter.vhd" 30 -1 0 } } { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { PBSwitch } "NODE_NAME" } } { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { PBSwitch } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0 "" 0} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "DipSwitch " "Info: Pin DipSwitch not assigned to an exact location on the device" {  } { { "c:/altera/72/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/altera/72/quartus/bin/pin_planner.ppl" { DipSwitch } } } { "DIP_PB_Counter.vhd" "" { Text "E:/專業/EDA/實驗/DIP_PB_Counter/DIP_PB_Counter.vhd" 31 -1 0 } } { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { DipSwitch } "NODE_NAME" } } { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { DipSwitch } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0 "" 0}  } {  } 0 0 "No exact pin location assignment(s) for %1!d! pins of %2!d! total pins" 0 0 "" 0}
{ "Info" "ITDC_FITTER_TIMING_ENGINE" "Classic " "Info: Fitter is using the Classic Timing Analyzer" {  } {  } 0 0 "Fitter is using the %1!s! Timing Analyzer" 0 0 "" 0}
{ "Info" "ITAN_TDC_NO_DEFAULT_OPTIMIZATION_GOALS" "" "Info: Timing requirements not specified -- quality metrics such as performance and power consumption may be sacrificed to reduce compilation time." {  } {  } 0 0 "Timing requirements not specified -- quality metrics such as performance and power consumption may be sacrificed to reduce compilation time." 0 0 "" 0}
{ "Extra Info" "IFSAC_FSAC_START_REG_LOCATION_PROCESSING" "" "Extra Info: Performing register packing on registers with non-logic cell location assignments" {  } {  } 1 0 "Performing register packing on registers with non-logic cell location assignments" 1 0 "" 0}
{ "Extra Info" "IFSAC_FSAC_FINISH_REG_LOCATION_PROCESSING" "" "Extra Info: Completed register packing on registers with non-logic cell location assignments" {  } {  } 1 0 "Completed register packing on registers with non-logic cell location assignments" 1 0 "" 0}
{ "Info" "IFYGR_FYGR_OPINFO_COMPLETED_OP" "User Assigned Global Signals Promotion Operation " "Info: Completed User Assigned Global Signals Promotion Operation" {  } {  } 0 0 "Completed %1!s!" 0 0 "" 0}
{ "Info" "IFYGR_FYGR_GLOBAL_LINES_NEEDED_FOR_TORNADO_DQS" "0 " "Info: DQS I/O pins require 0 global routing resources" {  } {  } 0 0 "DQS I/O pins require %1!d! global routing resources" 0 0 "" 0}
{ "Info" "IFYGR_FYGR_AUTO_GLOBAL_ASSIGNED_ALL_TO_GLOBAL" "clk Global clock in PIN 29 " "Info: Automatically promoted signal \"clk\" to use Global clock in PIN 29" {  } { { "DIP_PB_Counter.vhd" "" { Text "E:/專業/EDA/實驗/DIP_PB_Counter/DIP_PB_Counter.vhd" 28 -1 0 } }  } 0 0 "Automatically promoted signal \"%1!s!\" to use %2!s!" 0 0 "" 0}
{ "Info" "IFYGR_FYGR_AUTO_GLOBAL_ASSIGNED_ALL_TO_GLOBAL" "reset_b Global clock in PIN 28 " "Info: Automatically promoted signal \"reset_b\" to use Global clock in PIN 28" {  } { { "DIP_PB_Counter.vhd" "" { Text "E:/專業/EDA/實驗/DIP_PB_Counter/DIP_PB_Counter.vhd" 29 -1 0 } }  } 0 0 "Automatically promoted signal \"%1!s!\" to use %2!s!" 0 0 "" 0}
{ "Info" "IFYGR_FYGR_OPINFO_COMPLETED_OP" "Auto Global Promotion Operation " "Info: Completed Auto Global Promotion Operation" {  } {  } 0 0 "Completed %1!s!" 0 0 "" 0}
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_START_FYGR_REGPACKING_INFO" "" "Info: Starting register packing" {  } {  } 0 0 "Starting register packing" 0 0 "" 0}
{ "Extra Info" "IFSAC_FSAC_REGISTER_PACKING_BEGIN_FAST_REGISTER_INFO" "" "Extra Info: Started Fast Input/Output/OE register processing" {  } {  } 1 0 "Started Fast Input/Output/OE register processing" 1 0 "" 0}
{ "Extra Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_FAST_REGISTER_INFO" "" "Extra Info: Finished Fast Input/Output/OE register processing" {  } {  } 1 0 "Finished Fast Input/Output/OE register processing" 1 0 "" 0}
{ "Info" "IFYGR_FYGR_INFO_AUTO_MODE_REGISTER_PACKING" "Auto Normal " "Info: Fitter is using Normal packing mode for logic elements with Auto setting for Auto Packed Registers logic option" {  } {  } 0 0 "Fitter is using %2!s! packing mode for logic elements with %1!s! setting for Auto Packed Registers logic option" 0 0 "" 0}
{ "Extra Info" "IFSAC_FSAC_START_LUT_IO_RAM_PACKING" "" "Extra Info: Moving registers into I/O cells, LUTs, and RAM blocks to improve timing and density" {  } {  } 1 0 "Moving registers into I/O cells, LUTs, and RAM blocks to improve timing and density" 1 0 "" 0}