/* * \brief   DOpE input driver module for Charon's FPGA board * \date    2005-02-04 * \author  Norman Feske <norman.feske@genode-labs.com> *//* * Copyright (C) 2005-2008 Norman Feske <norman.feske@genode-labs.com> * Genode Labs, Feske & Helmuth Systementwicklung GbR * * This file is part of the DOpE-embedded package, which is distributed * under the terms of the GNU General Public License version 2. *//* FPGA includes */#include <stdio.h>     /* for printf */#include <unistd.h>    /* for usleep */#include "xparameters.h"#include "xutil.h"#include "xintc.h"#include "plb_ps2_controller.h"#ifdef __MICROBLAZE__#include "mb_interface.h"#endif /* __MICROBLAZE__ */#ifdef __PPC__#include "xexception_l.h"#include "xtime_l.h"#endif /* __PPC__ *//* local includes */#include "dopestd.h"#include "event.h"#include "input.h"#include "keycodes.h"#define EV_FIFO_SIZE 200#define INTC_DEVICE_ID         XPAR_INTC_0_DEVICE_ID/* translation table for scancode set 2 to scancode set 1 conversion */static int keyb_translation_table[16][16] = {{0xff,0x43,0x41,0x3f,0x3d,0x3b,0x3c,0x58,0x64,0x44,0x42,0x40,0x3e,0x0f,0x29,0x59},{0x65,0x38,0x2a,0x70,0x1d,0x10,0x02,0x5a,0x66,0x71,0x2c,0x1f,0x1e,0x11,0x03,0x5b},{0x67,0x2e,0x2d,0x20,0x12,0x05,0x04,0x5c,0x68,0x39,0x2f,0x21,0x14,0x13,0x06,0x5d},{0x69,0x31,0x30,0x23,0x22,0x15,0x07,0x5e,0x6a,0x72,0x32,0x24,0x16,0x08,0x09,0x5f},{0x6b,0x33,0x25,0x17,0x18,0x0b,0x0a,0x60,0x6c,0x34,0x35,0x26,0x27,0x19,0x0c,0x61},{0x6d,0x73,0x28,0x74,0x1a,0x0d,0x62,0x6e,0x3a,0x36,0x1c,0x1b,0x75,0x2b,0x63,0x76},{0x55,0x56,0x77,0x78,0x79,0x7a,0x0e,0x7b,0x7c,0x4f,0x7d,0x4b,0x47,0x7e,0x7f,0x6f},{0x52,0x53,0x50,0x4c,0x4d,0x48,0x01,0x45,0x57,0x4e,0x51,0x4a,0x37,0x49,0x46,0x54},{0x80,0x81,0x82,0x41,0x54,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f},{0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9a,0x9b,0x9c,0x9d,0x9e,0x9f},{0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf},{0xb0,0xb1,0xb2,0xb3,0xb4,0xb5,0xb6,0xb7,0xb8,0xb9,0xba,0xbb,0xbc,0xbd,0xbe,0xbf},{0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf},{0xd0,0xd1,0xd2,0xd3,0xd4,0xd5,0xd6,0xd7,0xd8,0xd9,0xda,0xdb,0xdc,0xdd,0xde,0xdf},{0xe0,0xe1,0xe2,0xe3,0xe4,0xe5,0xe6,0xe7,0xe8,0xe9,0xea,0xeb,0xec,0xed,0xee,0xef},{0xf0,0xf1,0xf2,0xf3,0xf4,0xf5,0xf6,0xf7,0xf8,0xf9,0xfa,0xfb,0xfc,0xfd,0xfe,0xff}};int init_input(struct dope_services *d);XStatus SetUpInterruptSystem(XIntc *XIntcInstancePtr);static XIntc InterruptController; /* Instance of the Interrupt Controller */struct input_event {	u32 type;	u32 code;	u32 rel_x;	u32 rel_y;};static struct input_event evqueue[EV_FIFO_SIZE];static int head = 0, tail = 0;/*********************** ** Utility functions ** ***********************//** * Insert event into event queue */void enqueue_event(int type, int code, int rel_x, int rel_y){	evqueue[head].type  = type;	evqueue[head].code  = code;	evqueue[head].rel_x = rel_x;	evqueue[head].rel_y = rel_y;	head = (head + 1) % EV_FIFO_SIZE;	/* if queue is full, discard old elements */	if (head == tail)		tail = (tail + 1) % EV_FIFO_SIZE;}/*********************** ** Interrupt handler ** ***********************/#define EVENT_FROM_KEYBD      0x1#define EVENT_FROM_MOUSE      0x2#define MOUSE_LEFT            0x1#define MOUSE_RIGHT           0x2#define MOUSE_HOR_MASK   0x00ff00#define MOUSE_VER_MASK   0xff0000#define MOUSE_HOR_SHIFT         8#define MOUSE_VER_SHIFT        16#define MOUSE_HOR_NEG    0x008000#define MOUSE_VER_NEG    0x800000#define KEYBD_TYPE_MASK     0x100#define KEYBD_CODE_MASK      0xff/** * Convert mouse event to dope event */void handle_mouse_event(u32 new_mstate){	static u32 old_mstate;	/* left mouse button pressed */	if (!(old_mstate & MOUSE_LEFT) && (new_mstate & MOUSE_LEFT))		enqueue_event(EVENT_PRESS, DOPE_BTN_LEFT, 0, 0);	/* left mouse button released */	if ((old_mstate & MOUSE_LEFT) && !(new_mstate & MOUSE_LEFT))		enqueue_event(EVENT_RELEASE, DOPE_BTN_LEFT, 0, 0);	/* right mouse button pressed */	if (!(old_mstate & MOUSE_RIGHT) && (new_mstate & MOUSE_RIGHT))		enqueue_event(EVENT_PRESS, DOPE_BTN_RIGHT, 0, 0);	/* right mouse button released */	if ((old_mstate & MOUSE_RIGHT) && !(new_mstate & MOUSE_RIGHT))		enqueue_event(EVENT_RELEASE, DOPE_BTN_RIGHT, 0, 0);	/* check for mouse motion */	if ((new_mstate & MOUSE_HOR_MASK) || (new_mstate & MOUSE_VER_MASK)) {		enqueue_event(EVENT_MOTION, 0,		      (new_mstate & MOUSE_HOR_NEG) ? (((new_mstate & MOUSE_HOR_MASK) >> MOUSE_HOR_SHIFT) | 0xFFFFFF00) : (new_mstate & MOUSE_HOR_MASK) >> MOUSE_HOR_SHIFT,		      (new_mstate & MOUSE_VER_NEG) ?  (int)((new_mstate & MOUSE_VER_MASK) >> MOUSE_VER_SHIFT | 0xFFFFFF00) * -1 : (int)((new_mstate & MOUSE_VER_MASK) >> MOUSE_VER_SHIFT) * -1 );	}	/* remember current mouse state for the next time */	old_mstate = new_mstate;}/** * Convert keyboard event to dope event */static void handle_keybd_event(u32 keystate){	int scancode;	/* translate hardware scancode set 2 to software scancode set 1 */	scancode = keyb_translation_table[(keystate>>4)&0x0F][keystate&0x0F];	/* key released */	if (keystate & KEYBD_TYPE_MASK)		enqueue_event(EVENT_RELEASE, scancode & KEYBD_CODE_MASK, 0, 0);	/* key pressed */	else enqueue_event(EVENT_PRESS, scancode & KEYBD_CODE_MASK, 0, 0);}/** * Input interrupt handler */void PS2_InterruptHandler(void *CallbackRef){	u32 mouse_state, keybd_state, flags;	Xuint32 baseaddr = (Xuint32) XPAR_PLB_PS2_CONTROLLER_0_BASEADDR;	/* read information from device registers */	keybd_state = ((u32 *)baseaddr)[0];	mouse_state = ((u32 *)baseaddr)[1];	flags       = PLB_PS2_CONTROLLER_mReadReg(baseaddr, PLB_PS2_CONTROLLER_INTR_IPISR_OFFSET);		if (flags & EVENT_FROM_MOUSE)		handle_mouse_event(mouse_state);	if (flags & EVENT_FROM_KEYBD)		handle_keybd_event(keybd_state);	/* clear interrupt flags in PS/2 controller */	PLB_PS2_CONTROLLER_mWriteReg(baseaddr, PLB_PS2_CONTROLLER_INTR_IPISR_OFFSET, flags);}/* VGA INTERRUPT HANDLER *///void NPI_VGA_InterruptHandler(void *CallbackRef) {//	u32 flags;//	Xuint32 baseaddr = (Xuint32) XPAR_PLB_PS2_CONTROLLER_0_BASEADDR;////	/* read interrupt state and clear interrupt *///	flags       = PLB_NPI_VGA_CONTROLLER_mReadReg(baseaddr, PLB_PS2_CONTROLLER_INTR_IPISR_OFFSET);//	PLB_NPI_VGA_CONTROLLER_mWriteReg(baseaddr, PLB_PS2_CONTROLLER_INTR_IPISR_OFFSET, flags);//}/*********************** ** Service functions ** ***********************//** * Get next event of event queue * * \return  0 if there is no pending event *          1 if there an event was returned in out parameter e */static int get_event(EVENT *e){	/* no event in queue */	if (head == tail) return 0;	e->type  = evqueue[tail].type;	e->code  = evqueue[tail].code;	e->rel_x = evqueue[tail].rel_x;	e->rel_y = evqueue[tail].rel_y;	tail = (tail + 1) % EV_FIFO_SIZE;	return 1;}/************************************* * Service structure of this module ** *************************************/static struct input_services input = {	get_event,};/************************ ** Module entry point ** ************************/int init_input(struct dope_services *d){	XStatus Status;	Xuint32 baseaddr = (Xuint32) XPAR_PLB_PS2_CONTROLLER_0_BASEADDR;	/* initialize PS/2 interrupts */	PLB_PS2_CONTROLLER_mWriteReg(baseaddr, PLB_PS2_CONTROLLER_INTR_DIER_OFFSET, 0);	PLB_PS2_CONTROLLER_mWriteReg(baseaddr, PLB_PS2_CONTROLLER_INTR_DGIER_OFFSET, 0xFFFFFFFF);	PLB_PS2_CONTROLLER_mWriteReg(baseaddr, PLB_PS2_CONTROLLER_INTR_IPIER_OFFSET, 0xFFFFFFFF);	PLB_PS2_CONTROLLER_mWriteReg(baseaddr, PLB_PS2_CONTROLLER_INTR_IPISR_OFFSET, 0);	/* initialize Interrupt controller */	Status = XIntc_Initialize(&InterruptController, (Xuint16)INTC_DEVICE_ID);	if (Status != XST_SUCCESS)	{//		print("INTC Interrupt init failed!\n");		return XST_FAILURE;	}//	print("INTC Interrupt init successful!\n");	Status = XIntc_SelfTest(&InterruptController);	if (Status != XST_SUCCESS)	{//		print("INTC Interrupt selftest failed!\n");		return XST_FAILURE;	}//	print("INTC Interrupt selftest successful!\n");    Status = SetUpInterruptSystem(&InterruptController);	if (Status != XST_SUCCESS)	{//		print("INTC Interrupt setup failed!\n");		return XST_FAILURE;	}//	print("INTC Interrupt setup successful!\n");	d->register_module("Input 1.0",&input);	return 1;}XStatus SetUpInterruptSystem(XIntc *XIntcInstancePtr){    XStatus Status;    /*     * Connect a device driver handler that will be called when an interrupt     * for the device occurs, the device driver handler performs the specific     * interrupt processing for the device     *///    Status = XIntc_Connect(XIntcInstancePtr, XPAR_XPS_INTC_0_PLB_NPI_VGA_CONTROLLER_0_IP2INTC_IRPT_INTR,//                           (XInterruptHandler)NPI_VGA_InterruptHandler,//                           (void *)0);//    if (Status != XST_SUCCESS)//    {//        return XST_FAILURE;//    }//	print("Interrupt handler VGA connected!\n");    Status = XIntc_Connect(XIntcInstancePtr, XPAR_XPS_INTC_0_PLB_PS2_CONTROLLER_0_IP2INTC_IRPT_INTR,                           (XInterruptHandler)PS2_InterruptHandler,                           (void *)0);    if (Status != XST_SUCCESS)    {        return XST_FAILURE;    }//	print("Interrupt handler PS/2 connected!\n");    /*     * Start the interrupt controller such that interrupts are enabled for     * all devices that cause interrupts, specify simulation mode so that     * an interrupt can be caused by software rather than a real hardware     * interrupt     */    Status = XIntc_Start(XIntcInstancePtr, XIN_REAL_MODE);    if (Status != XST_SUCCESS)    {        return XST_FAILURE;    }    /*     * Enable the interrupt for the device and then cause (simulate) an     * interrupt so the handlers will be called     */    XIntc_Enable(XIntcInstancePtr, XPAR_XPS_INTC_0_PLB_PS2_CONTROLLER_0_IP2INTC_IRPT_INTR);#ifdef __PPC__//	print("Enabling PPC interrupts!\n");    /*     * Initialize the PPC440 exception table     */    XExc_Init();    /*     * Register the interrupt controller handler with the exception table     */    XExc_RegisterHandler(XEXC_ID_NON_CRITICAL_INT,                        (XExceptionHandler)XIntc_InterruptHandler,                         XIntcInstancePtr);    /*     * Enable non-critical exceptions     */    XExc_mEnableExceptions(XEXC_NON_CRITICAL);	/* clear the timer status register to prevent timer interrupts */	XTime_TSRClearStatusBits(XREG_TSR_CLEAR_ALL);#endif /* __PPC__ */#ifdef __MICROBLAZE__    /*     * Enable the Interrupts for the MicroBlaze Processor     *///	print("Enable Microblaze Interrupt!\n");    microblaze_enable_interrupts();#endif /* __MICROBLAZE__ */    return XST_SUCCESS;}