The TAS3204 is a highly-integrated audio system-on-chip (SOC) consisting of a fully-programmable, 48-bit digital audio processor, a 3:1 stereo analog input MUX, four ADCs, four DACs, and other analog functionality. The TAS3204 is programmable with the graphical PurePath Studio? suite of DSP code development software. PurePath Studio is a highly intuitive, drag-and-drop environment that minimizes software development effort while allowing the end user to utilize the power and flexibility of the TAS3204’s digital audio processing core. TAS3204 processing capability includes speaker equalization and crossover, volume/bass/treble control, signal mixing/MUXing/splitting, delay compensation, dynamic range compression, and many other basic audio functions. Audio functions such as matrix decoding, stereo widening, surround sound virtualization and psychoacoustic bass boost are also available with either third-party or TI royalty-free algorithms. The TAS3204 contains a custom-designed, fully-programmable 135-MHz, 48-bit digital audio processor. A 76-bit accumulator ensures that the high precision necessary for quality digital audio is maintained during arithmetic operations. Four differential 102 dB DNR ADCs and four differential 105 dB DNR DACs ensure that high quality audio is maintained through the whole signal chain as well as increasing robustness against noise sources such as TDMA interference. The TAS3204 is composed of eight functional blocks: Clocking System Digital Audio Interface Analog Audio Interface Power supply Clocks, digital PLL I2C control interface 8051 MCUcontroller Audio DSP – digital audio processing 特性 Digital Audio Processor Fully Programmable With the Graphical, Drag-and-Drop PurePath Studio? Software Development Environment 135-MHz Operation 48-Bit Data Path With 76-Bit Accumulator Hardware Single-Cycle Multiplier (28 × 48)
上傳時間： 2016-05-06
上傳用戶：fagong
Computes all eigenvalues and eigenvectors of a real symmetric matrix a, ! which is of size n by n, stored in a physical np by np array. ! On output, elements of a above the diagonal are destroyed. ! d returns the eigenvalues of a in its first n elements. ! v is a matrix with the same logical and physical dimensions as a, ! whose columns contain, on output, the normalized eigenvectors of a. ! nrot returns the number of Jacobi rotations that were required. ! Please notice that the eigenvalues are not ordered on output. ! If the sorting is desired, the addintioal routine "eigsrt" ! can be invoked to reorder the output of jacobi.
上傳時間： 2016-06-04
上傳用戶：1512313
HTML5 從入門到精通主要講述HTML5 視頻、音樂、canvas、veb存儲、input類型等。
標簽： HTML5
上傳時間： 2016-10-24
上傳用戶：nhwswjsd
12bit 低功耗DAC 數模轉換器 The MAX5302 combines a low-power, voltage-output, 12-bit digital-to-analog converter (DAC) and a precision output amplifier in an 8-pin μMAX package. It operates from a single +5V supply, drawing less than 280μA of supply current.
上傳時間： 2017-02-21
上傳用戶：ckbihu
J1為Line input 5V，兩個104電容為濾波電容，引腳分別接地，主要濾掉高頻紋波，防止自激振蕩；47UF和100UF為濾波電容，主要濾掉低頻紋波；R1作限流作用以保護穩壓二極管D2，當輸入電壓和輸出負載電流發生變化時R1通過本身壓降的變化，來調節穩壓二極管D2的工作電流，從而起到穩壓作作用。
上傳時間： 2017-07-29
上傳用戶：18826226223
/****************temic*********t5557***********************************/ #include <at892051.h> #include <string.h> #include <intrins.h> #include <stdio.h> #define uchar unsigned char #define uint unsigned int #define ulong unsigned long //STC12C2051AD的SFR定義 sfr WDT_CONTR = 0xe1;//stc2051的看門狗?????? /**********全局常量************/ //寫卡的命令 #define write_command0 0//寫密碼 #define write_command1 1//寫配置字 #define write_command2 2//密碼寫數據 #define write_command3 3//喚醒 #define write_command4 4//停止命令 #define TRUE 1 #define FALSE 0 #define OK 0 #define ERROR 255 //讀卡的時間參數us #define ts_min 250//270*11.0592/12=249//取近似的整數 #define ts_max 304//330*11.0592/12=304 #define t1_min 73//90*11.0592/12=83:-10調整 #define t1_max 156//180*11.0592/12=166 #define t2_min 184//210*11.0592/12=194 #define t2_max 267//300*11.0592/12=276 //***********不采用中斷處理:采用查詢的方法讀卡時關所有中斷****************/ sbit p_U2270B_Standby = P3^5;//p_U2270B_Standby PIN=13 sbit p_U2270B_CFE = P3^3;//p_U2270B_CFE PIN=6 sbit p_U2270B_OutPut = P3^7;//p_U2270B_OutPut PIN=2 sbit wtd_sck = P1^7;//SPI總線 sbit wtd_si = P1^3; sbit wtd_so = P1^2; sbit iic_data = P1^2;//lcd IIC sbit iic_clk = P1^7; sbit led_light = P1^6;//測試綠燈 sbit led_light1 = P1^5;//測試紅燈 sbit led_light_ok = P1^1;//讀卡成功標志 sbit fengmingqi = P1^5; /***********全局變量************************************/ uchar data Nkey_a[4] = {0xA0, 0xA1, 0xA2, 0xA3};//初始密碼 //uchar idata card_snr[4]; //配置字 uchar data bankdata[28] = {1,2,3,4,5,6,7,1,2,3,4,5,6,7,1,2,3,4,5,6,7,1,2,3,4,5,6,7}; //存儲卡上用戶數據(1-7)7*4=28 uchar data cominceptbuff[6] = {1,2,3,4,5,6};//串口接收數組ram uchar command; //第一個命令 uchar command1;// //uint temp; uchar j,i; uchar myaddr = 8; //uchar ywqz_count,time_count; //ywqz jishu: uchar bdata DATA; sbit BIT0 = DATA^0; sbit BIT1 = DATA^1; sbit BIT2 = DATA^2; sbit BIT3 = DATA^3; sbit BIT4 = DATA^4; sbit BIT5 = DATA^5; sbit BIT6 = DATA^6; sbit BIT7 = DATA^7; uchar bdata DATA1; sbit BIT10 = DATA1^0; sbit BIT11 = DATA1^1; sbit BIT12 = DATA1^2; sbit BIT13 = DATA1^3; sbit BIT14 = DATA1^4; sbit BIT15 = DATA1^5; sbit BIT16 = DATA1^6; sbit BIT17 = DATA1^7; bit i_CurrentLevel;//i_CurrentLevel BIT 00H(Saves current level of OutPut pin of U2270B) bit timer1_end; bit read_ok = 0; //緩存定時值,因用同一個定時器 union HLint { uint W; struct { uchar H;uchar L; } B; };//union HLint idata a union HLint data a; //緩存定時值,因用同一個定時器 union HLint0 { uint W; struct { uchar H; uchar L; } B; };//union HLint idata a union HLint0 data b; /**********************函數原型*****************/ //讀寫操作 void f_readcard(void);//全部讀出1~7 AOR喚醒 void f_writecard(uchar x);//根據命令寫不同的內容和操作 void f_clearpassword(void);//清除密碼 void f_changepassword(void);//修改密碼 //功能子函數 void write_password(uchar data *data p);//寫初始密碼或數據 void write_block(uchar x,uchar data *data p);//不能用通用指針 void write_bit(bit x);//寫位 /*子函數區*****************************************************/ void delay_2(uint x) //延時,時間x*10us@12mhz,最小20us@12mhz { x--; x--; while(x) { _nop_(); _nop_(); x--; } _nop_();//WDT_CONTR=0X3C;不能頻繁的復位 _nop_(); } ///////////////////////////////////////////////////////////////////// void initial(void) { SCON = 0x50; //串口方式1,允許接收 //SCON =0x50; //01010000B:10位異步收發,波特率可變,SM2=0不用接收到有效停止位才RI=1, //REN=1允許接收 TMOD = 0x21; //定時器1 定時方式2(8位),定時器0 定時方式1(16位) TCON = 0x40; //設定時器1 允許開始計時(IT1=1) TH1 = 0xfD; //FB 18.432MHz 9600 波特率 TL1 = 0xfD; //fd 11.0592 9600 IE = 0X90; //EA=ES=1 TR1 = 1; //啟動定時器 WDT_CONTR = 0x3c;//使能看門狗 p_U2270B_Standby = 0;//單電源 PCON = 0x00; IP = 0x10;//uart you xian XXXPS PT1 PX1 PT0 PX0 led_light1 = 1; led_light = 0; p_U2270B_OutPut = 1; } /************************************************/ void f_readcard()//讀卡 { EA = 0;//全關,防止影響跳變的定時器計時 WDT_CONTR = 0X3C;//喂狗 p_U2270B_CFE = 1;// delay_2(232); //>2.5ms /* // aor 用喚醒功能來防碰撞 p_U2270B_CFE = 0; delay_2(18);//start gap>150us write_bit(1);//10=操作碼讀0頁 write_bit(0); write_password(&bankdata[24]);//密碼block7 p_U2270B_CFE =1 ;// delay_2(516);//編程及確認時間5.6ms */ WDT_CONTR = 0X3C;//喂狗 led_light = 0; b.W = 0; while(!(read_ok == 1)) { //while(p_U2270B_OutPut);//等一個穩定的低電平?超時判斷? while(!p_U2270B_OutPut);//等待上升沿的到來同步信號檢測1 TR0 = 1; //deng xia jiang while(p_U2270B_OutPut);//等待下降沿 TR0 = 0; a.B.H = TH0; a.B.L = TL0; TH0 = TL0 = 0; TR0 = 1;//定時器晚啟動10個周期 //同步頭 if((324 < a.W) && (a.W < 353)) ;//檢測同步信號1 else { TR0 = 0; TH0 = TL0 = 0; goto read_error; } //等待上升沿 while(!p_U2270B_OutPut); TR0 = 0; a.B.H = TH0; a.B.L = TL0; TH0 = TL0 = 0; TR0 = 1;//b.N1<<=8; if(a.B.L < 195);//0.5p else { TR0 = 0; TH0 = TL0 = 0; goto read_error; } //讀0~7塊的數據 for(j = 0;j < 28;j++) { //uchar i; for(i = 0;i < 16;i++)//8個位 { //等待下降沿的到來 while(p_U2270B_OutPut); TR0 = 0; a.B.H = TH0; a.B.L = TL0; TH0 = TL0 = 0; TR0 = 1; if(t2_max < a.W/*)&&(a.W < t2_max)*/)//1P { b.W >>= 2;//先左移再賦值 b.B.L += 0xc0; i++; } else if(t1_min < a.B.L/*)&&(a.B.L < t1_max)*/)//0.5p { b.W >>= 1; b.B.L += 0x80; } else { TR0 = 0; TH0 = TL0 = 0; goto read_error; } i++; while(!p_U2270B_OutPut);//上升 TR0 = 0; a.B.H = TH0; a.B.L = TL0; TH0 = TL0 = 0; TR0 = 1; if(t2_min < a.W/*)&&(a.W < t2_max)*/)//1P { b.W >>= 2; i++; } else if(t1_min < a.B.L/*a.W)&&(a.B.L < t1_max)*/)//0.5P //else if(!(a.W==0)) { b.W >>= 1; //temp+=0x00; //led_light1=0;led_light=1;delay_2(40000); } else { TR0 = 0; TH0 = TL0 = 0; goto read_error; } i++; } //取出奇位 DATA = b.B.L; BIT13 = BIT7; BIT12 = BIT5; BIT11 = BIT3; BIT10 = BIT1; DATA = b.B.H; BIT17 = BIT7; BIT16 = BIT5; BIT15 = BIT3; BIT14 = BIT1; bankdata[j] = DATA1; } read_ok = 1;//讀卡完成了 read_error: _nop_(); } } /***************************************************/ void f_writecard(uchar x)//寫卡 { p_U2270B_CFE = 1; delay_2(232); //>2.5ms //psw=0 standard write if (x == write_command0)//寫密碼:初始化密碼 { uchar i; uchar data *data p; p = cominceptbuff; p_U2270B_CFE = 0; delay_2(31);//start gap>330us write_bit(1);//寫操作碼1:10 write_bit(0);//寫操作碼0 write_bit(0);//寫鎖定位0 for(i = 0;i < 35;i++) { write_bit(1);//寫數據位1 } p_U2270B_CFE = 1; led_light1 = 0; led_light = 1; delay_2(40000);//測試使用 //write_block(cominceptbuff[4],p); p_U2270B_CFE = 1; bankdata[20] = cominceptbuff[0];//密碼存入 bankdata[21] = cominceptbuff[1]; bankdata[22] = cominceptbuff[2]; bankdata[23] = cominceptbuff[3]; } else if (x == write_command1)//配置卡參數:初始化 { uchar data *data p; p = cominceptbuff; write_bit(1);//寫操作碼1:10 write_bit(0);//寫操作碼0 write_bit(0);//寫鎖定位0 write_block(cominceptbuff[4],p); p_U2270B_CFE= 1; } //psw=1 pssword mode else if(x == write_command2) //密碼寫數據 { uchar data*data p; p = &bankdata[24]; write_bit(1);//寫操作碼1:10 write_bit(0);//寫操作碼0 write_password(p);//發口令 write_bit(0);//寫鎖定位0 p = cominceptbuff; write_block(cominceptbuff[4],p);//寫數據 } else if(x == write_command3)//aor //喚醒 { //cominceptbuff[1]操作碼10 X xxxxxB uchar data *data p; p = cominceptbuff; write_bit(1);//10 write_bit(0); write_password(p);//密碼 p_U2270B_CFE = 1;//此時數據不停的循環傳出 } else //停止操作碼 { write_bit(1);//11 write_bit(1); p_U2270B_CFE = 1; } p_U2270B_CFE = 1; delay_2(560);//5.6ms } /************************************/ void f_clearpassword()//清除密碼 { uchar data *data p; uchar i,x; p = &bankdata[24];//原密碼 p_U2270B_CFE = 0; delay_2(18);//start gap>150us //操作碼10:10xxxxxxB write_bit(1); write_bit(0); for(x = 0;x < 4;x++)//發原密碼 { DATA = *(p++); for(i = 0;i < 8;i++) { write_bit(BIT0); DATA >>= 1; } } write_bit(0);//鎖定位0:0 p = &cominceptbuff[0]; write_block(0x00,p);//寫新配置參數:pwd=0 //密碼無效:即清除密碼 DATA = 0x00;//停止操作碼00000000B for(i = 0;i < 2;i++) { write_bit(BIT7); DATA <<= 1; } p_U2270B_CFE = 1; delay_2(560);//5.6ms } /*********************************/ void f_changepassword()//修改密碼 { uchar data *data p; uchar i,x,addr; addr = 0x07;//block7 p = &Nkey_a[0];//原密碼 DATA = 0x80;//操作碼10:10xxxxxxB for(i = 0;i < 2;i++) { write_bit(BIT7); DATA <<= 1; } for(x = 0;x < 4;x++)//發原密碼 { DATA = *(p++); for(i = 0;i < 8;i++) { write_bit(BIT7); DATA >>= 1; } } write_bit(0);//鎖定位0:0 p = &cominceptbuff[0]; write_block(0x07,p);//寫新密碼 p_U2270B_CFE = 1; bankdata[24] = cominceptbuff[0];//密碼存入 bankdata[25] = cominceptbuff[1]; bankdata[26] = cominceptbuff[2]; bankdata[27] = cominceptbuff[3]; DATA = 0x00;//停止操作碼00000000B for(i = 0;i < 2;i++) { write_bit(BIT7); DATA <<= 1; } p_U2270B_CFE = 1; delay_2(560);//5.6ms } /***************************子函數***********************************/ void write_bit(bit x)//寫一位 { if(x) { p_U2270B_CFE = 1; delay_2(32);//448*11.0592/120=42延時448us p_U2270B_CFE = 0; delay_2(28);//280*11.0592/120=26寫1 } else { p_U2270B_CFE = 1; delay_2(92);//192*11.0592/120=18 p_U2270B_CFE = 0; delay_2(28);//280*11.0592/120=26寫0 } } /*******************寫一個block*******************/ void write_block(uchar addr,uchar data *data p) { uchar i,j; for(i = 0;i < 4;i++)//block0數據 { DATA = *(p++); for(j = 0;j < 8;j++) { write_bit(BIT0); DATA >>= 1; } } DATA = addr <<= 5;//0地址 for(i = 0;i < 3;i++) { write_bit(BIT7); DATA <<= 1; } } /*************************************************/ void write_password(uchar data *data p) { uchar i,j; for(i = 0;i < 4;i++)// { DATA = *(p++); for(j = 0;j < 8;j++) { write_bit(BIT0); DATA >>= 1; } } } /*************************************************/ void main() { initial(); TI = RI = 0; ES = 1; EA = 1; delay_2(28); //f_readcard(); while(1) { f_readcard(); //讀卡 f_writecard(command1); //寫卡 f_clearpassword(); //清除密碼 f_changepassword(); //修改密碼 } }
標簽： 12345
上傳時間： 2017-10-20
上傳用戶：my_lcs
The 4.0 kbit/s speech codec described in this paper is based on a Frequency Domain Interpolative (FDI) coding technique, which belongs to the class of prototype waveform Interpolation (PWI) coding techniques. The codec also has an integrated voice activity detector (VAD) and a noise reduction capability. The input signal is subjected to LPC analysis and the prediction residual is separated into a slowly evolving waveform (SEW) and a rapidly evolving waveform (REW) components. The SEW magnitude component is quantized using a hierarchical predictive vector quantization approach. The REW magnitude is quantized using a gain and a sub-band based shape. SEW and REW phases are derived at the decoder using a phase model, based on a transmitted measure of voice periodicity. The spectral (LSP) parameters are quantized using a combination of scalar and vector quantizers. The 4.0 kbits/s coder has an algorithmic delay of 60 ms and an estimated floating point complexity of 21.5 MIPS. The performance of this coder has been evaluated using in-house MOS tests under various conditions such as background noise. channel errors, self-tandem. and DTX mode of operation, and has been shown to be statistically equivalent to ITU-T (3.729 8 kbps codec across all conditions tested.
標簽： frequency-domain interpolation performance Design kbit_s speech coder based and of
上傳時間： 2018-04-08
上傳用戶：kilohorse
#include "iostream" using namespace std; class Matrix { private: double** A; //矩陣A double *b; //向量b public: int size; Matrix(int ); ~Matrix(); friend double* Dooli(Matrix& ); void Input(); void Disp(); }; Matrix::Matrix(int x) { size=x; //為向量b分配空間并初始化為0 b=new double [x]; for(int j=0;j<x;j++) b[j]=0; //為向量A分配空間并初始化為0 A=new double* [x]; for(int i=0;i<x;i++) A[i]=new double [x]; for(int m=0;m<x;m++) for(int n=0;n<x;n++) A[m][n]=0; } Matrix::~Matrix() { cout<<"正在析構中~~~~"<<endl; delete b; for(int i=0;i<size;i++) delete A[i]; delete A; } void Matrix::Disp() { for(int i=0;i<size;i++) { for(int j=0;j<size;j++) cout<<A[i][j]<<" "; cout<<endl; } } void Matrix::Input() { cout<<"請輸入A:"<<endl; for(int i=0;i<size;i++) for(int j=0;j<size;j++){ cout<<"第"<<i+1<<"行"<<"第"<<j+1<<"列:"<<endl; cin>>A[i][j]; } cout<<"請輸入b:"<<endl; for(int j=0;j<size;j++){ cout<<"第"<<j+1<<"個:"<<endl; cin>>b[j]; } } double* Dooli(Matrix& A) { double *Xn=new double [A.size]; Matrix L(A.size),U(A.size); //分別求得U，L的第一行與第一列 for(int i=0;i<A.size;i++) U.A[0][i]=A.A[0][i]; for(int j=1;j<A.size;j++) L.A[j][0]=A.A[j][0]/U.A[0][0]; //分別求得U，L的第r行，第r列 double temp1=0,temp2=0; for(int r=1;r<A.size;r++){ //U for(int i=r;i<A.size;i++){ for(int k=0;k<r-1;k++) temp1=temp1+L.A[r][k]*U.A[k][i]; U.A[r][i]=A.A[r][i]-temp1; } //L for(int i=r+1;i<A.size;i++){ for(int k=0;k<r-1;k++) temp2=temp2+L.A[i][k]*U.A[k][r]; L.A[i][r]=(A.A[i][r]-temp2)/U.A[r][r]; } } cout<<"計算U得:"<<endl; U.Disp(); cout<<"計算L的:"<<endl; L.Disp(); double *Y=new double [A.size]; Y[0]=A.b[0]; for(int i=1;i<A.size;i++ ){ double temp3=0; for(int k=0;k<i-1;k++) temp3=temp3+L.A[i][k]*Y[k]; Y[i]=A.b[i]-temp3; } Xn[A.size-1]=Y[A.size-1]/U.A[A.size-1][A.size-1]; for(int i=A.size-1;i>=0;i--){ double temp4=0; for(int k=i+1;k<A.size;k++) temp4=temp4+U.A[i][k]*Xn[k]; Xn[i]=(Y[i]-temp4)/U.A[i][i]; } return Xn; } int main() { Matrix B(4); B.Input(); double *X; X=Dooli(B); cout<<"~~~~解得:"<<endl; for(int i=0;i<B.size;i++) cout<<"X["<<i<<"]:"<<X[i]<<" "; cout<<endl<<"呵呵呵呵呵"; return 0; }
標簽： 道理特分解法
上傳時間： 2018-05-20
上傳用戶：Aa123456789
#include<stdio.h> #include<windows.h> int xuanxiang; int studentcount; int banjihao[100]; int xueqihao[100][10]; char xm[100][100]; int xuehao[100][10]; int score[100][3]; int yuwen; int shuxue[000]; int yingyu[100]; int c[100]; int p; char x[1000][100]="",y[100][100]="";/*x學院 y專業 z班級*/ int z[100]; main() { void input(); void inputsc(); void alter(); void scbybannji(); printf("--------學生成績管理-----\n"); printf("請按相應數字鍵來實現相應功能\n"); printf("1.錄入學生信息 2.錄入學生成績 3.修改學生成績\n"); printf("4.查詢學生成績 5.不及格科目及名單 6.按班級輸出學生成績單\n"); printf("請輸入你要實現的功能所對應的數字:"); scanf("%d",&xuanxiang); system("cls"); getchar(); switch (xuanxiang) { case 1:input(); case 2:inputsc(); case 3:alter(); /*case 4:select score(); case 5:bujigekemujimingdan();*/ case 6:scbybanji; } } void input() { int i; printf("請輸入你的學院名稱:"); gets(x); printf("請輸入你的專業名稱:"); gets(y); printf("請輸入你的班級號:"); scanf("%d",&z); printf("請輸入你們一個班有幾個人:"); scanf("%d",&p); system("cls"); for(i=0;i<p;i++) { printf("請輸入第%d個學生的學號:",i+1); scanf("%d",xuehao[i]); getchar(); printf("請輸入第%d個學生的姓名:",i+1); gets(xm[i]); system("cls"); } printf("您已經錄入完畢您的班級所有學生的信息!\n"); printf("您的班級為%s%s%s\n",x,y,z); /*alter(p);*/ } void inputsc() { int i; for(i=0;i<p;i++) { printf("\n"); printf("--------------------------------------------------------------------------------\n\n"); printf("\t\t\t\t錄入學生的成績\n\n\n"); printf("--------------------------------------------------------------------------------\n\n"); printf("\t\t\t\t%s\n",xm[i]); printf("\n"); printf("\t\t\t\t數學:"); scanf("%d",&shuxue[i]); printf("\n"); getchar(); printf("\t\t\t\t英語:"); scanf("%d",&yingyu[i]); printf("\n"); getchar(); printf("\t\t\t\tc語言:"); scanf("%d",&c[i]); system("cls"); } } void alter() { int i;/*循環變量*/ int m[10000];/*要查詢的學號*/ int b;/*修改后的成績*/ char kemu[20]=""; printf("請輸入你要修改的學生的學號"); scanf("%d",&m); for (i=0;i<p;i++) { if (m==xuehao[i]) { printf("%s的數學成績為%d,英語成績為%d,c語言成績為%d,xm[i],shuxue[i],yingyu[i],c[i]"); printf("請輸入你想修改的科目");} } gets(kemu); getchar(); if (kemu=="數學"); { scanf("%d",&b); shuxue[i]=b;} if (kemu=="英語"); { scanf("%d",&b); yingyu[i]=b;} if (kemu=="c語言"); { scanf("%d",&b); c[i]=b; } printf("%s的數學成績為%d,英語成績為%d,c語言成績為%d,xm[i],shuxue[i],yingyu[i],c[i]"); } void scbybannji() { int i; char zyname[20]; int bjnumber; printf("請輸入你的專業名稱"); scanf("%s",&zyname); printf("請輸入你的班級號"); scanf("%d",&bjnumber); for (i=0;i<p;i++) { if (zyname==y[i]); if (bjnumber==z[i]); printf("專業名稱%s班級號%d數學成績%d英語成績%dc語言成績%d，y[i],z[i],shuxue[i],yingyu[i],c[i]"); } }
標簽： c語言
上傳時間： 2018-06-08
上傳用戶：2369043090
我們的優勢： 1：我司為VINTE/臺灣元泰半導體股份有限公司/VINKA的獨家授權大中華區代理商，產品渠道正宗，確保原裝正品，大量庫存現貨，客戶批量不懼假貨！ 2：公司工程力量雄厚，真誠技術服務支持，搭配原廠服務各種應用產品客戶。 3：好價格源自連接原廠直銷，你有量，我有價，確保原裝的好價格。 VK原廠代理：許先生 QQ：191 888 5898 TEL：188 9858 2398 優勢代理元泰VKD常用觸控按鍵IC，簡介如下： 標準觸控IC-電池供電系列 VKD223EB --- 工作電壓/電流：2.0V-5.5V/5uA-3V 感應通道數：1 通訊接口 最長響應時間快速模式60mS，低功耗模式220ms 封裝：SOT23-6 VKD223B --- 工作電壓/電流：2.0V-5.5V/5uA-3V 感應通道數：1 通訊接口 最長響應時間快速模式60mS，低功耗模式220ms 封裝：SOT23-6 VKD232C --- 工作電壓/電流： 2.4V-5.5V/2.5uA-3V 感應通道數：2封裝：SOT23-6 通訊接口：直接輸出，低電平有效 固定為多鍵輸出模式，內建穩壓電路 VKD233DH（更小體積2*2）---工作電壓/電流： 2.4V-5.5V/2.5uA-3V 1按鍵 封裝：DFN6L 通訊接口：直接輸出，鎖存(toggle)輸出 有效鍵最長時間檢測16S VKD233DB(推薦) --- 工作電壓/電流： 2.4V-5.5V/2.5uA-3V 1感應按鍵 封裝：SOT23-6 通訊接口：直接輸出，鎖存(toggle)輸出 低功耗模式電流2.5uA-3V VKD233DH（推薦）---工作電壓/電流： 2.4V-5.5V/2.5uA-3V 1感應按鍵 封裝：SOT23-6 通訊接口：直接輸出，鎖存(toggle)輸出 有效鍵最長時間檢測16S 標準觸控IC-多鍵觸摸按鈕系列 VKD104SB/N --- 工作電壓/電流：2.4V-5.5V/13uA-3V 感應通道數/按鍵數：4 通訊接口：直接輸出,鎖存輸出,開漏輸出 封裝：SSOP-16 VKD104BC --- 工作電壓/電流：2.4V-5.5V/13uA-3V 感應通道數/按鍵數：4 通訊接口：直接輸出,鎖存輸出,開漏輸出 封裝：SOP-16 VKD104BR --- 工作電壓/電流：2.4V-5.5V/13uA-3V 感應通道數/按鍵數：2 通訊接口：直接輸出, toggle輸出 封裝：SOP-8 VKD104QB --- 工作電壓/電流：2.4V-5.5V/13uA-3V 感應通道數/按鍵數：4 通訊接口：直接輸出,鎖存輸出,開漏輸出 封裝：QFN-16 VKD1016B --- 工作電壓/電流：2.4V-5.5V/20uA-3V 感應通道數/按鍵數：16-8 通訊接口：直接輸出,鎖存輸出,開漏輸出 封裝：SSOP-28 VKD1016L --- 工作電壓/電流：2.4V-5.5V/20uA-3V 感應通道數：16-8 通訊接口：直接輸出,鎖存輸出,開漏輸出 封裝：SSOP-28 (元泰原廠授權 原裝正品保障 工程技術支持 大量現貨庫存) 標準觸控IC-VK36系列 VK3601SS --- 工作電壓/電流：2.4V-5.5V/1mA-5.0V 感應通道數：1 通訊接口：1 INPUT/1PWM OUT 封裝：SOP-8 VK3601S --- 工作電壓/電流：2.4V-5.5V/4mA-3.3V 感應通道數：1 通訊接口：1 INPUT/1PWM OUT 封裝：SOP-8 VK3602XS --- 工作電壓/電流：2.4V-5.5V/ 60uA-3V 感應通道數：2 通訊接口：2對2 toggle輸出 封裝：SOP-8 VK3602K --- 工作電壓/電流：2.4V-5.5V/ 60uA-3V 感應通道數：2 通訊接口：2對2 toggle輸出 封裝：SOP-8 VK3606DM --- 工作電壓/電流：3.1V-5.5V/ 3mA-5V 感應通道數：6 通訊接口：1對1直接輸出 封裝：SOP-16 VK3606OM --- 工作電壓/電流：3.1V-5.5V/ 3mA-5V 感應通道數：6 通訊接口：1對1開漏輸出 封裝：SOP-16 VK3608BM --- 工作電壓/電流：3.1V-5.5V/ 3mA-5V 感應通道數：6 通訊接口：BCD碼直接輸出 封裝：SOP-16 VK3610IM --- 工作電壓/電流：3.1V-5.5V/ 3mA-5V 感應通道數：6 通訊接口：SCL/SDA/INT通訊口 封裝：SOP-16 標準觸控IC-VK37系列 VK3702DM --- 工作電壓/電流：3.1V-5.5V/ 3mA-5V 感應通道數：2 通訊接口：1對1直接輸出 封裝：SOP-8 VK3702OM --- 工作電壓/電流：3.1V-5.5V/ 3mA-5V 感應通道數：2 通訊接口：1對1開漏輸出 封裝：SOP-8 VK3702TM --- 工作電壓/電流：3.1V-5.5V/ 3mA-5V 感應通道數：2 通訊接口：1對1toggle輸出 封裝：SOP-8 VK3706DM --- 工作電壓/電流：3.1V-5.5V/ 3mA-5V 感應通道數：6 通訊接口：1對1直接輸出 封裝：SOP-16 VK3706OM --- 工作電壓/電流：3.1V-5.5V/ 3mA-5V 感應通道數：6 通訊接口：1對1開漏輸出 封裝：SOP-16 VK3708BM --- 工作電壓/電流：3.1V-5.5V/ 3mA-5V 感應通道數：8 通訊接口：BCD碼直接輸出 封裝：SOP-16 VK3710IM --- 工作電壓/電流：3.1V-5.5V/ 3mA-5V 感應通道數：10 通訊接口：SCL/SDA/INT通訊口 封裝：SOP-16 標準觸控IC-VK38系列 VK3809IP --- 工作電壓/電流：2.5V-5.5V/1.1mA-3V 感應通道數：9 通訊接口：IIC/INT通訊口 封裝：SSOP-16 VK3813IP --- 工作電壓/電流：2.5V-5.5V/1.1mA-3V 感應通道數：13 通訊接口：IIC/INT通訊口 封裝：SSOP-20 VK3816IP --- 工作電壓/電流：2.5V-5.5V/1.1mA-3V 感應通道數：16 通訊接口：IIC/INT通訊口 封裝：SSOP-28 VK3816IP-A --- 工作電壓/電流：2.5V-5.5V/1.1mA-3V 感應通道數：16 通訊接口：IIC/INT通訊口 封裝：SSOP-28 (所有型號全部封裝均有現貨，歡迎加Q查詢 191 888 5898 許生) 以上介紹內容為IC參數簡介，難免有錯漏，且相關IC型號眾多，未能一一收錄。歡迎聯系索取完整資料及樣品！ 請加許先生 QQ：191 888 5898聯系！謝謝 生意無論大小，做人首重誠信！本公司全體員工將既往開來，再接再厲。爭取為各位帶來更專業的技術支持，更優質的銷售服務，更高性價比的好產品.竭誠希望能與各位客戶朋友深入溝通，攜手共進，共同成長，合作共贏！謝謝。
上傳時間： 2018-09-21
上傳用戶：szqxw1688
