不用說的好，我們室主任開發的Photonics cyrestal band gap計算Fortran代碼。注意不要忘了input文本。
標簽：
上傳時間： 2014-01-23
上傳用戶：jcljkh
最后的戰役，（jay的）非常好聽，
標簽：
上傳時間： 2016-08-10
上傳用戶：bruce5996
Liferea is an abbreviation for Linux Feed Reader. It is a news aggregator for online news feeds. It supports a number of different feed formats including RSS/RDF, CDF and Atom. There are many other news readers available, but these others are not available for Linux or require many extra libraries to be installed. Liferea tries to fill this gap by creating a fast, easy to use, easy to install news aggregator for GTK/GNOME. It was last updated for Liferea version 1.4.
標簽： news abbreviation aggregator for
上傳時間： 2016-12-05
上傳用戶：luopoguixiong
In the last decade the processing of polygonal meshes has emerged as an active and very productive research area. This can basically be attributed to two developments: Modern geometry acquisition devices, like laser scanners and MRT, easily produce raw polygonal meshes of ever growing complexity Downstream applications like analysis tools (medical imaging), computer aided manufacturing, or numerical simulations all require high quality polygonal meshes as input. The need to bridge the gap between raw triangle soup data and high-quality polygon meshes has driven the research on ecient data structures and algorithms that directly operate on polygonal meshes rather than on a (most often not feasible) intermediate CAD representation.
標簽： processing productive the polygonal
上傳時間： 2017-06-03
上傳用戶：TF2015
主要介紹了phone gap 月jquery 相結合的至少
標簽： phonegap
上傳時間： 2015-05-30
上傳用戶：hanyuchenxi
/****************temic*********t5557***********************************/ #include <at892051.h> #include <string.h> #include <intrins.h> #include <stdio.h> #define uchar unsigned char #define uint unsigned int #define ulong unsigned long //STC12C2051AD的SFR定義 sfr WDT_CONTR = 0xe1;//stc2051的看門狗?????? /**********全局常量************/ //寫卡的命令 #define write_command0 0//寫密碼 #define write_command1 1//寫配置字 #define write_command2 2//密碼寫數據 #define write_command3 3//喚醒 #define write_command4 4//停止命令 #define TRUE 1 #define FALSE 0 #define OK 0 #define ERROR 255 //讀卡的時間參數us #define ts_min 250//270*11.0592/12=249//取近似的整數 #define ts_max 304//330*11.0592/12=304 #define t1_min 73//90*11.0592/12=83:-10調整 #define t1_max 156//180*11.0592/12=166 #define t2_min 184//210*11.0592/12=194 #define t2_max 267//300*11.0592/12=276 //***********不采用中斷處理:采用查詢的方法讀卡時關所有中斷****************/ sbit p_U2270B_Standby = P3^5;//p_U2270B_Standby PIN=13 sbit p_U2270B_CFE = P3^3;//p_U2270B_CFE PIN=6 sbit p_U2270B_OutPut = P3^7;//p_U2270B_OutPut PIN=2 sbit wtd_sck = P1^7;//SPI總線 sbit wtd_si = P1^3; sbit wtd_so = P1^2; sbit iic_data = P1^2;//lcd IIC sbit iic_clk = P1^7; sbit led_light = P1^6;//測試綠燈 sbit led_light1 = P1^5;//測試紅燈 sbit led_light_ok = P1^1;//讀卡成功標志 sbit fengmingqi = P1^5; /***********全局變量************************************/ uchar data Nkey_a[4] = {0xA0, 0xA1, 0xA2, 0xA3};//初始密碼 //uchar idata card_snr[4]; //配置字 uchar data bankdata[28] = {1,2,3,4,5,6,7,1,2,3,4,5,6,7,1,2,3,4,5,6,7,1,2,3,4,5,6,7}; //存儲卡上用戶數據(1-7)7*4=28 uchar data cominceptbuff[6] = {1,2,3,4,5,6};//串口接收數組ram uchar command; //第一個命令 uchar command1;// //uint temp; uchar j,i; uchar myaddr = 8; //uchar ywqz_count,time_count; //ywqz jishu: uchar bdata DATA; sbit BIT0 = DATA^0; sbit BIT1 = DATA^1; sbit BIT2 = DATA^2; sbit BIT3 = DATA^3; sbit BIT4 = DATA^4; sbit BIT5 = DATA^5; sbit BIT6 = DATA^6; sbit BIT7 = DATA^7; uchar bdata DATA1; sbit BIT10 = DATA1^0; sbit BIT11 = DATA1^1; sbit BIT12 = DATA1^2; sbit BIT13 = DATA1^3; sbit BIT14 = DATA1^4; sbit BIT15 = DATA1^5; sbit BIT16 = DATA1^6; sbit BIT17 = DATA1^7; bit i_CurrentLevel;//i_CurrentLevel BIT 00H(Saves current level of OutPut pin of U2270B) bit timer1_end; bit read_ok = 0; //緩存定時值,因用同一個定時器 union HLint { uint W; struct { uchar H;uchar L; } B; };//union HLint idata a union HLint data a; //緩存定時值,因用同一個定時器 union HLint0 { uint W; struct { uchar H; uchar L; } B; };//union HLint idata a union HLint0 data b; /**********************函數原型*****************/ //讀寫操作 void f_readcard(void);//全部讀出1~7 AOR喚醒 void f_writecard(uchar x);//根據命令寫不同的內容和操作 void f_clearpassword(void);//清除密碼 void f_changepassword(void);//修改密碼 //功能子函數 void write_password(uchar data *data p);//寫初始密碼或數據 void write_block(uchar x,uchar data *data p);//不能用通用指針 void write_bit(bit x);//寫位 /*子函數區*****************************************************/ void delay_2(uint x) //延時,時間x*10us@12mhz,最小20us@12mhz { x--; x--; while(x) { _nop_(); _nop_(); x--; } _nop_();//WDT_CONTR=0X3C;不能頻繁的復位 _nop_(); } ///////////////////////////////////////////////////////////////////// void initial(void) { SCON = 0x50; //串口方式1,允許接收 //SCON =0x50; //01010000B:10位異步收發,波特率可變,SM2=0不用接收到有效停止位才RI=1, //REN=1允許接收 TMOD = 0x21; //定時器1 定時方式2(8位),定時器0 定時方式1(16位) TCON = 0x40; //設定時器1 允許開始計時(IT1=1) TH1 = 0xfD; //FB 18.432MHz 9600 波特率 TL1 = 0xfD; //fd 11.0592 9600 IE = 0X90; //EA=ES=1 TR1 = 1; //啟動定時器 WDT_CONTR = 0x3c;//使能看門狗 p_U2270B_Standby = 0;//單電源 PCON = 0x00; IP = 0x10;//uart you xian XXXPS PT1 PX1 PT0 PX0 led_light1 = 1; led_light = 0; p_U2270B_OutPut = 1; } /************************************************/ void f_readcard()//讀卡 { EA = 0;//全關,防止影響跳變的定時器計時 WDT_CONTR = 0X3C;//喂狗 p_U2270B_CFE = 1;// delay_2(232); //>2.5ms /* // aor 用喚醒功能來防碰撞 p_U2270B_CFE = 0; delay_2(18);//start gap>150us write_bit(1);//10=操作碼讀0頁 write_bit(0); write_password(&bankdata[24]);//密碼block7 p_U2270B_CFE =1 ;// delay_2(516);//編程及確認時間5.6ms */ WDT_CONTR = 0X3C;//喂狗 led_light = 0; b.W = 0; while(!(read_ok == 1)) { //while(p_U2270B_OutPut);//等一個穩定的低電平?超時判斷? while(!p_U2270B_OutPut);//等待上升沿的到來同步信號檢測1 TR0 = 1; //deng xia jiang while(p_U2270B_OutPut);//等待下降沿 TR0 = 0; a.B.H = TH0; a.B.L = TL0; TH0 = TL0 = 0; TR0 = 1;//定時器晚啟動10個周期 //同步頭 if((324 < a.W) && (a.W < 353)) ;//檢測同步信號1 else { TR0 = 0; TH0 = TL0 = 0; goto read_error; } //等待上升沿 while(!p_U2270B_OutPut); TR0 = 0; a.B.H = TH0; a.B.L = TL0; TH0 = TL0 = 0; TR0 = 1;//b.N1<<=8; if(a.B.L < 195);//0.5p else { TR0 = 0; TH0 = TL0 = 0; goto read_error; } //讀0~7塊的數據 for(j = 0;j < 28;j++) { //uchar i; for(i = 0;i < 16;i++)//8個位 { //等待下降沿的到來 while(p_U2270B_OutPut); TR0 = 0; a.B.H = TH0; a.B.L = TL0; TH0 = TL0 = 0; TR0 = 1; if(t2_max < a.W/*)&&(a.W < t2_max)*/)//1P { b.W >>= 2;//先左移再賦值 b.B.L += 0xc0; i++; } else if(t1_min < a.B.L/*)&&(a.B.L < t1_max)*/)//0.5p { b.W >>= 1; b.B.L += 0x80; } else { TR0 = 0; TH0 = TL0 = 0; goto read_error; } i++; while(!p_U2270B_OutPut);//上升 TR0 = 0; a.B.H = TH0; a.B.L = TL0; TH0 = TL0 = 0; TR0 = 1; if(t2_min < a.W/*)&&(a.W < t2_max)*/)//1P { b.W >>= 2; i++; } else if(t1_min < a.B.L/*a.W)&&(a.B.L < t1_max)*/)//0.5P //else if(!(a.W==0)) { b.W >>= 1; //temp+=0x00; //led_light1=0;led_light=1;delay_2(40000); } else { TR0 = 0; TH0 = TL0 = 0; goto read_error; } i++; } //取出奇位 DATA = b.B.L; BIT13 = BIT7; BIT12 = BIT5; BIT11 = BIT3; BIT10 = BIT1; DATA = b.B.H; BIT17 = BIT7; BIT16 = BIT5; BIT15 = BIT3; BIT14 = BIT1; bankdata[j] = DATA1; } read_ok = 1;//讀卡完成了 read_error: _nop_(); } } /***************************************************/ void f_writecard(uchar x)//寫卡 { p_U2270B_CFE = 1; delay_2(232); //>2.5ms //psw=0 standard write if (x == write_command0)//寫密碼:初始化密碼 { uchar i; uchar data *data p; p = cominceptbuff; p_U2270B_CFE = 0; delay_2(31);//start gap>330us write_bit(1);//寫操作碼1:10 write_bit(0);//寫操作碼0 write_bit(0);//寫鎖定位0 for(i = 0;i < 35;i++) { write_bit(1);//寫數據位1 } p_U2270B_CFE = 1; led_light1 = 0; led_light = 1; delay_2(40000);//測試使用 //write_block(cominceptbuff[4],p); p_U2270B_CFE = 1; bankdata[20] = cominceptbuff[0];//密碼存入 bankdata[21] = cominceptbuff[1]; bankdata[22] = cominceptbuff[2]; bankdata[23] = cominceptbuff[3]; } else if (x == write_command1)//配置卡參數:初始化 { uchar data *data p; p = cominceptbuff; write_bit(1);//寫操作碼1:10 write_bit(0);//寫操作碼0 write_bit(0);//寫鎖定位0 write_block(cominceptbuff[4],p); p_U2270B_CFE= 1; } //psw=1 pssword mode else if(x == write_command2) //密碼寫數據 { uchar data*data p; p = &bankdata[24]; write_bit(1);//寫操作碼1:10 write_bit(0);//寫操作碼0 write_password(p);//發口令 write_bit(0);//寫鎖定位0 p = cominceptbuff; write_block(cominceptbuff[4],p);//寫數據 } else if(x == write_command3)//aor //喚醒 { //cominceptbuff[1]操作碼10 X xxxxxB uchar data *data p; p = cominceptbuff; write_bit(1);//10 write_bit(0); write_password(p);//密碼 p_U2270B_CFE = 1;//此時數據不停的循環傳出 } else //停止操作碼 { write_bit(1);//11 write_bit(1); p_U2270B_CFE = 1; } p_U2270B_CFE = 1; delay_2(560);//5.6ms } /************************************/ void f_clearpassword()//清除密碼 { uchar data *data p; uchar i,x; p = &bankdata[24];//原密碼 p_U2270B_CFE = 0; delay_2(18);//start gap>150us //操作碼10:10xxxxxxB write_bit(1); write_bit(0); for(x = 0;x < 4;x++)//發原密碼 { DATA = *(p++); for(i = 0;i < 8;i++) { write_bit(BIT0); DATA >>= 1; } } write_bit(0);//鎖定位0:0 p = &cominceptbuff[0]; write_block(0x00,p);//寫新配置參數:pwd=0 //密碼無效:即清除密碼 DATA = 0x00;//停止操作碼00000000B for(i = 0;i < 2;i++) { write_bit(BIT7); DATA <<= 1; } p_U2270B_CFE = 1; delay_2(560);//5.6ms } /*********************************/ void f_changepassword()//修改密碼 { uchar data *data p; uchar i,x,addr; addr = 0x07;//block7 p = &Nkey_a[0];//原密碼 DATA = 0x80;//操作碼10:10xxxxxxB for(i = 0;i < 2;i++) { write_bit(BIT7); DATA <<= 1; } for(x = 0;x < 4;x++)//發原密碼 { DATA = *(p++); for(i = 0;i < 8;i++) { write_bit(BIT7); DATA >>= 1; } } write_bit(0);//鎖定位0:0 p = &cominceptbuff[0]; write_block(0x07,p);//寫新密碼 p_U2270B_CFE = 1; bankdata[24] = cominceptbuff[0];//密碼存入 bankdata[25] = cominceptbuff[1]; bankdata[26] = cominceptbuff[2]; bankdata[27] = cominceptbuff[3]; DATA = 0x00;//停止操作碼00000000B for(i = 0;i < 2;i++) { write_bit(BIT7); DATA <<= 1; } p_U2270B_CFE = 1; delay_2(560);//5.6ms } /***************************子函數***********************************/ void write_bit(bit x)//寫一位 { if(x) { p_U2270B_CFE = 1; delay_2(32);//448*11.0592/120=42延時448us p_U2270B_CFE = 0; delay_2(28);//280*11.0592/120=26寫1 } else { p_U2270B_CFE = 1; delay_2(92);//192*11.0592/120=18 p_U2270B_CFE = 0; delay_2(28);//280*11.0592/120=26寫0 } } /*******************寫一個block*******************/ void write_block(uchar addr,uchar data *data p) { uchar i,j; for(i = 0;i < 4;i++)//block0數據 { DATA = *(p++); for(j = 0;j < 8;j++) { write_bit(BIT0); DATA >>= 1; } } DATA = addr <<= 5;//0地址 for(i = 0;i < 3;i++) { write_bit(BIT7); DATA <<= 1; } } /*************************************************/ void write_password(uchar data *data p) { uchar i,j; for(i = 0;i < 4;i++)// { DATA = *(p++); for(j = 0;j < 8;j++) { write_bit(BIT0); DATA >>= 1; } } } /*************************************************/ void main() { initial(); TI = RI = 0; ES = 1; EA = 1; delay_2(28); //f_readcard(); while(1) { f_readcard(); //讀卡 f_writecard(command1); //寫卡 f_clearpassword(); //清除密碼 f_changepassword(); //修改密碼 } }
標簽： 12345
上傳時間： 2017-10-20
上傳用戶：my_lcs
Theartofcomputationofelectromagnetic(EM)problemshasgrownexponentially for three decades due to the availability of powerful computer resources. In spite of this, the EM community has suffered without a suitable text on the computational techniques commonly used in solving EM-related problems. Although there have been monographs on one particular technique or another, the monographs are written for the experts rather than students. Only a few texts cover the major techniques and dothatinamannersuitableforclassroomuse.Itseemsexpertsinthisareaarefamiliar with one or a few techniques but not many seem to be familiar with all the common techniques. This text attempts to fill that gap.
標簽： Electromagnetics Techniques Numerical in
上傳時間： 2020-05-31
上傳用戶：shancjb
The mature CMOS fabrication processes are available in many IC foundries. It is cost-effective to leverage the existing CMOS fabrication technologies to implement MEMS devices. On the other hand, the MEMS devices could also add values to the IC industry as the Moore’s law reaching its limit. The CMOS MEMS could play a key role to bridge the gap between the CMOS and MEMS technologies. The CMOS MEMS also offers the advantage of monolithic integration of ICs and micro mechanical components.
標簽： TECHNOLOGY CMOS MEMS KEY
上傳時間： 2020-06-06
上傳用戶：shancjb
GaN is an already well implanted semiconductor technology, widely diffused in the LED optoelectronics industry. For about 10 years, GaN devices have also been developed for RF wireless applications where they can replace Silicon transistors in some selected systems. That incursion in the RF field has open the door to the power switching capability in the lower frequency range and thus to the power electronic applications. Compared to Silicon, GaN exhibits largely better figures for most of the key specifications: Electric field, energy gap, electron mobility and melting point. Intrinsically, GaN could offer better performance than Silicon in terms of: breakdown voltage, switching frequency and Overall systems efficiency.
標簽： GaN-on-Si Displace and SiC Si
上傳時間： 2020-06-07
上傳用戶：shancjb
《Linux內核驅動模塊編程指南》最初是由 Ori Pomerantz為22版本的內核編寫的，后來，ori將文檔維護的任務交給了 Peter Jay Salzman，Peter完成了24內核版本文檔的編寫，畢竟Lnux內核驅動模塊是一個更新很快的內容。現在，Peter也無法騰出足夠的時間來完成2.6內核版本文檔的編寫，目前該2.6內核版本的文檔由合作者 Michael Burian完成版本和注意Linux內核模塊是一塊不斷更新進步的內容，在 LKMPG上總有關于是否保留還是歷史版本的爭論。Michae和我最終是決定為每個新的穩定版本內核建立一個新的文檔分支。也就是說LKMPG24x專注于24的內核，而 LKMPG2.6X將專注于26的內核。我們不會在一篇文檔中提供對舊版本內核的支持，對此感興趣的讀者應該尋找相關版本的文檔分支在文檔中的絕大部分源代碼和討論都應該適用于其它平臺，但我無法提供任何保證。其中的一個例外就是 Chapter12，中斷處理該章的源代碼和討論就只適用于x86平臺。什么是內核模塊？?jī)?nèi)核模塊是如何被調入內核工作的？什么是內核模塊？現在，你是不是想編寫內核模塊。你應該懂得C語言，寫過一些用戶程序，那么現在你將要見識一些真實的東西。在這里，你會看到一個野蠻的指針是如何毀掉你的文件系統的次內核崩潰意味著重啟動。什么是內核模塊？?jī)?nèi)核模塊是一些可以讓操作系統內核在需要時載入和執行的代碼，這同樣意味著它可以在不需要時有操作系統卸載。它們擴展了操作系統內核的功能卻不需要重新啟動系統。舉例子來說，其中一種內核模塊時設備驅動程序模塊，它們用來讓操作系統正確識別，使用安裝在系統上的硬件設備。如果沒有內核模塊，我們不得不一次又一次重新編譯生成單內核操作系統的內核鏡像來加入新的功能。這還意味著一個臃腫的內核。內核模塊是如何被調入內核工作的？你可以通過執行 Ismo命令來査看內核已經加載了哪些內核模塊，該命令通過讀取/proc/modules文件的內容來獲得所需信息這些內核模塊是如何被調入內核的？當操作系統內核需要的擴展功能不存在時，內核模塊管理守護進程kmod1]執行 modprobe去加載內核模塊。兩種類型的參數被傳遞給 modprobe
標簽： linux
上傳時間： 2022-03-30
上傳用戶：
蟲蟲下載站版權所有 京ICP備2021023401號-1
