<center id="wemgg"></center>
?ARINC429總線協議是美國航空電子工程委員會(Airlines Engineering Committee)于1977年7月提出的，并于同年發表并獲得批準使用，它的全稱是數字式信息傳輸系統(Digital Information Transmission System ) 。協議標準規定了航空電子設備及有關系統間的數字信息傳輸要求。ARINC429廣泛應用在先進的民航客機中，如B-737、B-757、B-767，俄制軍用飛機也選用了類似的技術。
標簽： ARINC429 總線
上傳時間： 2015-03-25
上傳用戶：423619775
A design about 8051 (running at 12MHz) based system with 3 7-Seg displays and two buttons to implement the following functions. 1. When press the + button, the display C = A+B. 2. When press the button, the display C = A - B. “A” and “B” are 8-bit inputs when “C” is 9-bit output.
上傳時間： 2015-05-05
上傳用戶：guoxiy
/* * _168ZHONGDUAN2.c * * Created: 2014/11/2 15:12:45 * Author: lenovo */ #include <avr/io.h> #include <avr/iom168pa.h> #include <avr/interrupt.h> #include <util/delay.h> #include <avr/eeprom.h> //#include <util/delay_basic.h> //unsigned char const SEGtable[]={0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x07,0x7f,0x6f,0x40}; #define BIT(x) (1<<(x)) #include<avr/signal.h> #include<avr/pgmspace.h> #include<util/delay.h> #include<avr/eeprom.h> #define setb(val,bitn) (val|=(1<<(bitn)))//設置某IO口某位為1 #define clr(val,bitn) (val&=~(1<<(bitn)))//設置某IO口某位為0 #define get(val,bitn) (val&(1<<(bitn)))//讀取某位狀態 //uchar ACT[8] ={0xfe,0xfd,0xfb,0xf7,0xef,0xdf,0xbf,0x7f}; #define CPL_BIT(x,y) (x^=(1<<y)) #define CLR_BIT(x,y) (x&=~(1<<y)) #define SET_1(a,b) a|=(1<<b) #define CLE_0(a,b) a&=~(1<<b) /*------宏定義------*/ #include <avr/wdt.h> #include <avr/sleep.h> #include <avr/interrupt.h> #include <avr/pgmspace.h> #include <util/delay.h> #include <avr/eeprom.h> #define setb(val,bitn) (val|=(1<<(bitn)))//設置某IO口某位為1 #define clr(val,bitn) (val&=~(1<<(bitn)))//設置某IO口某位為0 #define get(val,bitn) (val&(1<<(bitn)))//讀取某位狀態 #define uint8 unsigned char #define uint16 unsigned int #define P_LCDCS1 setb(PORTB,5) #define P_LCDCS0 clr(PORTB,5) #define P_LCDRST1 setb(PORTB,1) #define P_LCDRST0 clr(PORTB,1) #define P_LCDRS1 setb(PORTB,2) #define P_LCDRS0 clr(PORTB,2) #define P_LCDDAT1 setb(PORTB,4) #define P_LCDDAT0 clr(PORTB,4) #define P_LCDCLK1 setb(PORTB,3) #define P_LCDCLK0 clr(PORTB,3) //#define LCD_ //-----頁地址定義----- #define Page1 0 #define Page2 1 #define Page3 2 #define Page4 3 #define Page5 4 #define Page6 5 #define Page7 6 #define Page8 7 //-----列地址定義-----每8列地址增1 #define List8_1 0 #define List8_2 7 #define List8_3 15 #define List8_4 23 #define List8_5 31 #define List8_6 39 #define List8_7 47 #define List8_8 55 #define List8_9 63 #define List8_10 71 #define List8_11 79 #define List8_12 87 #define List8_13 95 #define List8_14 103 #define List8_15 111 #define List8_16 119 //#define List8_17 127 //-----列地址定義-----每16列地址增1 #define List16_1 0 #define List16_2 15 #define List16_3 31 #define List16_4 47 #define List16_5 63 #define List16_6 79 #define List16_7 95 #define List16_8 111 //---------------------------------- #define STR_CHARG "Charge" //提示充電 #define STR_PRCE "%" //電量百分比 #define STR_ERR "Err" //出錯顯示 #define STR_OFF "OFF" //關機顯示 //待機顯示 #define STR_WAIT1 "Portable UPS" #define STR_WAIT2 "110V/60HZ" #define STR_WAIT3 "Select:DC OR AC" #define STR_WAIT4 "BATTERY:" //開機顯示 #define STR_OUTSTATUS "Out Status:" #define STR_DCOUT12V "DC12V" #define STR_DCOUT5V "DC5V" #define STR_ACOUT "AC110V" //#define STR_MAOHAO ":" //====================================== extern uint8 LOCKA[2][16] ; //extern uint8 code BATS[10][16] ; extern uint8 BAT2S[12][32] ; extern uint8 NC[] ; extern uint8 mao_hao[] ; extern uint8 num1[] ; extern uint8 num2[] ; extern uint8 num3[] ; extern uint8 num4[] ; extern uint8 num5[] ; extern uint8 num6[] ; extern uint8 num7[] ; extern uint8 num8[] ; extern uint8 num9[] ; extern uint8 Tab_Ascii_8x16[95][16] ; extern uint8 Tab_Ascii_5x7[95][5] ; extern uint8 zhuang1[] ; extern uint8 tai1[] ; extern uint8 shi1[] ; extern uint8 yong1[] ; //---------------------------------- //extern void LcdWriteCommand(uint8 data1) ; extern void Display_Graphic_32x32(uint8 page,uint8 column,uint8 *dp) ; extern void Display_Graphic_32x16(uint8 page,uint8 column,uint8 *dp) ; extern void Display_Graphic_16x16(uint8 page,uint8 column,uint8 *dp) ; extern void Display_Graphic_8x16(uint8 page,uint8 column,uint8 *dp) ; extern void Display_String_8x16(uint8 page,uint8 column,uint8 *text) ; extern void Display_Num_8x16(uint8 page,uint8 column,uint8 Num) ; extern void Display_Digital_8x16(uint8 page,uint8 column,uint8 *a) ; extern void Display_Nop_8x16(uint8 page,uint8 column,uint8 DatLong) ; extern void Display_String_5x7(uint8 page,uint8 column,uint8 *text) ; extern void Full_Display(void) ; extern void Clear_Screen(void) ; extern void Init_lcd12864(void) ; //#endif //========c12864.c============================================== /*************************************************** LCD:晶聯訊電子 JLX12864G-086-PN(不帶字庫IC-UC1701X) 僅支持串行驅動方式 ***************************************************/ //#include "global.h" //#include "c12864.h" #define Tab_Ascii_8x16_CALL1 //粗體字形 #define Tab_Ascii_8x16_CALL2 //細體字形 #define Tab_Ascii_5x7_CALL #define Display_Graphic_32x32_CALL #define Display_Graphic_32x16_CALL #define Display_Graphic_16x16_CALL #define Display_Graphic_8x16_CALL #define Display_String_8x16_CALL //顯示字符串 #define Display_Num_8x16_CALL //顯示單個數據0-9 #define Display_Digital_8x16_CALL //顯示數據0-9999 #define Display_Nop_8x16_CALL //填充8*16的空字符N個 #define Display_String_5x7_CALL #define Full_Display_CALL //============================================================================== uint8 aa[]={0,1,2,3,4,5,6,7,8,9}; uint8 LOCKA[2][16]={ //-- 童鎖符號 -- //-- 此字體下對應的點陣為：寬x高=16x16 -- //0x00, 0x00, 0xc0, 0xe0, 0xf0, 0xd8, 0xcc, 0xc4, 0xc4, 0xcc, 0xd8, 0xf0, 0xe0, 0xc0, 0x00, 0x00, //0x00, 0x00, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x00, 0x00, 0x00, 0x00, 0xc0, 0xe0, 0xb0, 0x98, 0x8c, 0x8c, 0x8c, 0x8c, 0x98, 0xb0, 0xe0, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x00, 0x00, } ; const PROGMEM uint8_t BATS[10][16]={ //-- 電池符號 -- //-- 此字體下對應的點陣為：寬x高=16x16 -- 0x00, 0x00, 0x00, 0xf8, 0x08, 0x08, 0x0c, 0x0e, 0x0e, 0x0c, 0x08, 0x08, 0xf8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x08, 0x08, 0x0c, 0x0e, 0x0e, 0x0c, 0x08, 0x08, 0xf8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0x70, 0x70, 0x70, 0x70, 0x70, 0x70, 0x70, 0x70, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x08, 0x08, 0x0c, 0x0e, 0x0e, 0x0c, 0x08, 0x08, 0xf8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0x7e, 0x7e, 0x7e, 0x7e, 0x7e, 0x7e, 0x7e, 0x7e, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0xc8, 0xc8, 0xcc, 0xce, 0xce, 0xcc, 0xc8, 0xc8, 0xf8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0xf8, 0xf8, 0xfc, 0xfe, 0xfe, 0xfc, 0xf8, 0xf8, 0xf8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f, 0x00, 0x00, 0x00, }; const PROGMEM uint8_t BAT2S1[12][32]={ /*-- 電池符號 --*/ /*-- 此字體下對應的點陣為：寬x高=32x16 --*/ {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0xf8, 0xc0, 0x80}, {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x3f, 0x07, 0x03}, {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x08, 0x08, 0xe8, 0xe8, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0xf8, 0xc0, 0x80}, {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x20, 0x20, 0x2f, 0x2f, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x3f, 0x07, 0x03}, {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x08, 0x08, 0xe8, 0xe8, 0x08, 0x08, 0xe8, 0xe8, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0xf8, 0xc0, 0x80}, {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x20, 0x20, 0x2f, 0x2f, 0x20, 0x20, 0x2f, 0x2f, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x3f, 0x07, 0x03}, {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x08, 0x08, 0xe8, 0xe8, 0x08, 0x08, 0xe8, 0xe8, 0x08, 0x08, 0xe8, 0xe8, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0xf8, 0xc0, 0x80}, {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x20, 0x20, 0x2f, 0x2f, 0x20, 0x20, 0x2f, 0x2f, 0x20, 0x20, 0x2f, 0x2f, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x3f, 0x07, 0x03}, {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x08, 0x08, 0xe8, 0xe8, 0x08, 0x08, 0xe8, 0xe8, 0x08, 0x08, 0xe8, 0xe8, 0x08, 0x08, 0xe8, 0xe8, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0xf8, 0xc0, 0x80}, {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x20, 0x20, 0x2f, 0x2f, 0x20, 0x20, 0x2f, 0x2f, 0x20, 0x20, 0x2f, 0x2f, 0x20, 0x20, 0x2f, 0x2f, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x3f, 0x07, 0x03}, {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x08, 0x08, 0xe8, 0xe8, 0x08, 0x08, 0xe8, 0xe8, 0x08, 0x08, 0xe8, 0xe8, 0x08, 0x08, 0xe8, 0xe8, 0x08, 0x08, 0xe8, 0xe8, 0x08, 0x08, 0xf8, 0xc0, 0x80}, {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x20, 0x20, 0x2f, 0x2f, 0x20, 0x20, 0x2f, 0x2f, 0x20, 0x20, 0x2f, 0x2f, 0x20, 0x20, 0x2f, 0x2f, 0x20, 0x20, 0x2f, 0x2f, 0x20, 0x20, 0x3f, 0x07, 0x03}, } ; const PROGMEM uint8_t BAT2S2[2][32]={ //-- 電池符號 不顯示 -- //-- 此字體下對應的點陣為：寬x高=32x16 -- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, } ; uint8 NC[]={ /*-- 文字: 空符號 --*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, } ; uint8 mao_hao[]={ /*-- 文字: : (冒號） --*/ /*-- 宋體12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0x00,0x00,0xC0,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00}; uint8 num0[]={ /*-- 文字: 0 --*/ /*-- 宋體12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x0F,0x10,0x20,0x20,0x10,0x0F,0x00 }; uint8 num1[]={ /*-- 文字: 1 --*/ /*-- 宋體12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0x10,0x10,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00 }; uint8 num2[]={ /*-- 文字: 2 --*/ /*-- 宋體12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0x70,0x08,0x08,0x08,0x88,0x70,0x00,0x00,0x30,0x28,0x24,0x22,0x21,0x30,0x00 //細體 //0x08,0x0C,0x84,0xC4,0x64,0x3C,0x18,0x00,0x0E,0x0F,0x09,0x08,0x08,0x0C,0x0C,0x00, // 粗體 }; uint8 num3[]={ /*-- 文字: 3 --*/ /*-- 宋體12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0x30,0x08,0x88,0x88,0x48,0x30,0x00,0x00,0x18,0x20,0x20,0x20,0x11,0x0E,0x00 }; uint8 num4[]={ /*-- 文字: 4 --*/ /*-- 宋體12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0x00,0xC0,0x20,0x10,0xF8,0x00,0x00,0x00,0x07,0x04,0x24,0x24,0x3F,0x24,0x00 }; uint8 num5[]={ /*-- 文字: 5 --*/ /*-- 宋體12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0xF8,0x08,0x88,0x88,0x08,0x08,0x00,0x00,0x19,0x21,0x20,0x20,0x11,0x0E,0x00 }; uint8 num6[]={ /*-- 文字: 6 --*/ /*-- 宋體12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0xE0,0x10,0x88,0x88,0x18,0x00,0x00,0x00,0x0F,0x11,0x20,0x20,0x11,0x0E,0x00 }; uint8 num7[]={ /*-- 文字: 7 --*/ /*-- 宋體12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0x38,0x08,0x08,0xC8,0x38,0x08,0x00,0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00 }; uint8 num8[]={ /*-- 文字: 8 --*/ /*-- 宋體12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0x70,0x88,0x08,0x08,0x88,0x70,0x00,0x00,0x1C,0x22,0x21,0x21,0x22,0x1C,0x00 }; uint8 num9[]={ /*-- 文字: 9 --*/ /*-- 宋體12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x00,0x31,0x22,0x22,0x11,0x0F,0x00 }; //=======8x16======================================================================= #ifdef Display_String_8x16_CALL //Tab_Ascii_8x16_CALL const PROGMEM uint8_t Tab_Ascii_8x161[95][16]={ //粗體字形 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, // - - 0x00,0x00,0x38,0xFC,0xFC,0x38,0x00,0x00,0x00,0x00,0x00,0x0D,0x0D,0x00,0x00,0x00, // -!- 0x00,0x0E,0x1E,0x00,0x00,0x1E,0x0E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, // -"- 0x20,0xF8,0xF8,0x20,0xF8,0xF8,0x20,0x00,0x02,0x0F,0x0F,0x02,0x0F,0x0F,0x02,0x00, // -#- 0x38,0x7C,0x44,0x47,0x47,0xCC,0x98,0x00,0x03,0x06,0x04,0x1C,0x1C,0x07,0x03,0x00, // -$- 0x30,0x30,0x00,0x80,0xC0,0x60,0x30,0x00,0x0C,0x06,0x03,0x01,0x00,0x0C,0x0C,0x00, // -%- 0x80,0xD8,0x7C,0xE4,0xBC,0xD8,0x40,0x00,0x07,0x0F,0x08,0x08,0x07,0x0F,0x08,0x00, // -&- 0x00,0x10,0x1E,0x0E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, // -'- 0x00,0x00,0xF0,0xF8,0x0C,0x04,0x00,0x00,0x00,0x00,0x03,0x07,0x0C,0x08,0x00,0x00, // -(- 0x00,0x00,0x04,0x0C,0xF8,0xF0,0x00,0x00,0x00,0x00,0x08,0x0C,0x07,0x03,0x00,0x00, // -)- 0x80,0xA0,0xE0,0xC0,0xC0,0xE0,0xA0,0x80,0x00,0x02,0x03,0x01,0x01,0x03,0x02,0x00, // -*- 0x00,0x80,0x80,0xE0,0xE0,0x80,0x80,0x00,0x00,0x00,0x00,0x03,0x03,0x00,0x00,0x00, // -+- 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x10,0x1E,0x0E,0x00,0x00,0x00, // -,- 0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, // --- 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0C,0x0C,0x00,0x00,0x00, // -.- 0x00,0x00,0x00,0x80,0xC0,0x60,0x30,0x00,0x0C,0x06,0x03,0x01,0x00,0x00,0x00,0x00, // -/- 0xF8,0xFC,0x04,0xC4,0x24,0xFC,0xF8,0x00,0x07,0x0F,0x09,0x08,0x08,0x0F,0x07,0x00, // -0- 0x00,0x10,0x18,0xFC,0xFC,0x00,0x00,0x00,0x00,0x08,0x08,0x0F,0x0F,0x08,0x08,0x00, // -1- 0x08,0x0C,0x84,0xC4,0x64,0x3C,0x18,0x00,0x0E,0x0F,0x09,0x08,0x08,0x0C,0x0C,0x00, // -2- 0x08,0x0C,0x44,0x44,0x44,0xFC,0xB8,0x00,0x04,0x0C,0x08,0x08,0x08,0x0F,0x07,0x00, // -3- 0xC0,0xE0,0xB0,0x98,0xFC,0xFC,0x80,0x00,0x00,0x00,0x00,0x08,0x0F,0x0F,0x08,0x00, // -4- 0x7C,0x7C,0x44,0x44,0xC4,0xC4,0x84,0x00,0x04,0x0C,0x08,0x08,0x08,0x0F,0x07,0x00, // -5- 0xF0,0xF8,0x4C,0x44,0x44,0xC0,0x80,0x00,0x07,0x0F,0x08,0x08,0x08,0x0F,0x07,0x00, // -6- 0x0C,0x0C,0x04,0x84,0xC4,0x7C,0x3C,0x00,0x00,0x00,0x0F,0x0F,0x00,0x00,0x00,0x00, // -7- 0xB8,0xFC,0x44,0x44,0x44,0xFC,0xB8,0x00,0x07,0x0F,0x08,0x08,0x08,0x0F,0x07,0x00, // -8- 0x38,0x7C,0x44,0x44,0x44,0xFC,0xF8,0x00,0x00,0x08,0x08,0x08,0x0C,0x07,0x03,0x00, // -9- 0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,0x00,0x00,0x00,0x06,0x06,0x00,0x00,0x00, // -:- 0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,0x00,0x00,0x08,0x0E,0x06,0x00,0x00,0x00, // -;- 0x00,0x80,0xC0,0x60,0x30,0x18,0x08,0x00,0x00,0x00,0x01,0x03,0x06,0x0C,0x08,0x00, // -<- 0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x00,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x00, // -=- 0x00,0x08,0x18,0x30,0x60,0xC0,0x80,0x00,0x00,0x08,0x0C,0x06,0x03,0x01,0x00,0x00, // ->- 0x18,0x1C,0x04,0xC4,0xE4,0x3C,0x18,0x00,0x00,0x00,0x00,0x0D,0x0D,0x00,0x00,0x00, // -?- 0xF0,0xF8,0x08,0xC8,0xC8,0xF8,0xF0,0x00,0x07,0x0F,0x08,0x0B,0x0B,0x0B,0x01,0x00, // -@- 0xE0,0xF0,0x98,0x8C,0x98,0xF0,0xE0,0x00,0x0F,0x0F,0x00,0x00,0x00,0x0F,0x0F,0x00, // -A- 0x04,0xFC,0xFC,0x44,0x44,0xFC,0xB8,0x00,0x08,0x0F,0x0F,0x08,0x08,0x0F,0x07,0x00, // -B- 0xF0,0xF8,0x0C,0x04,0x04,0x0C,0x18,0x00,0x03,0x07,0x0C,0x08,0x08,0x0C,0x06,0x00, // -C- 0x04,0xFC,0xFC,0x04,0x0C,0xF8,0xF0,0x00,0x08,0x0F,0x0F,0x08,0x0C,0x07,0x03,0x00, // -D- 0x04,0xFC,0xFC,0x44,0xE4,0x0C,0x1C,0x00,0x08,0x0F,0x0F,0x08,0x08,0x0C,0x0E,0x00, // -E- 0x04,0xFC,0xFC,0x44,0xE4,0x0C,0x1C,0x00,0x08,0x0F,0x0F,0x08,0x00,0x00,0x00,0x00, // -F- 0xF0,0xF8,0x0C,0x84,0x84,0x8C,0x98,0x00,0x03,0x07,0x0C,0x08,0x08,0x07,0x0F,0x00, // -G- 0xFC,0xFC,0x40,0x40,0x40,0xFC,0xFC,0x00,0x0F,0x0F,0x00,0x00,0x00,0x0F,0x0F,0x00, // -H- 0x00,0x00,0x04,0xFC,0xFC,0x04,0x00,0x00,0x00,0x00,0x08,0x0F,0x0F,0x08,0x00,0x00, // -I- 0x00,0x00,0x00,0x04,0xFC,0xFC,0x04,0x00,0x07,0x0F,0x08,0x08,0x0F,0x07,0x00,0x00, // -J- 0x04,0xFC,0xFC,0xC0,0xF0,0x3C,0x0C,0x00,0x08,0x0F,0x0F,0x00,0x01,0x0F,0x0E,0x00, // -K- 0x04,0xFC,0xFC,0x04,0x00,0x00,0x00,0x00,0x08,0x0F,0x0F,0x08,0x08,0x0C,0x0E,0x00, // -L- 0xFC,0xFC,0x38,0x70,0x38,0xFC,0xFC,0x00,0x0F,0x0F,0x00,0x00,0x00,0x0F,0x0F,0x00, // -M- 0xFC,0xFC,0x38,0x70,0xE0,0xFC,0xFC,0x00,0x0F,0x0F,0x00,0x00,0x00,0x0F,0x0F,0x00, // -N- 0xF0,0xF8,0x0C,0x04,0x0C,0xF8,0xF0,0x00,0x03,0x07,0x0C,0x08,0x0C,0x07,0x03,0x00, // -O- 0x04,0xFC,0xFC,0x44,0x44,0x7C,0x38,0x00,0x08,0x0F,0x0F,0x08,0x00,0x00,0x00,0x00, // -P- 0xF8,0xFC,0x04,0x04,0x04,0xFC,0xF8,0x00,0x07,0x0F,0x08,0x0E,0x3C,0x3F,0x27,0x00, // -Q- 0x04,0xFC,0xFC,0x44,0xC4,0xFC,0x38,0x00,0x08,0x0F,0x0F,0x00,0x00,0x0F,0x0F,0x00, // -R- 0x18,0x3C,0x64,0x44,0xC4,0x9C,0x18,0x00,0x06,0x0E,0x08,0x08,0x08,0x0F,0x07,0x00, // -S- 0x00,0x1C,0x0C,0xFC,0xFC,0x0C,0x1C,0x00,0x00,0x00,0x08,0x0F,0x0F,0x08,0x00,0x00, // -T- 0xFC,0xFC,0x00,0x00,0x00,0xFC,0xFC,0x00,0x07,0x0F,0x08,0x08,0x08,0x0F,0x07,0x00, // -U- 0xFC,0xFC,0x00,0x00,0x00,0xFC,0xFC,0x00,0x01,0x03,0x06,0x0C,0x06,0x03,0x01,0x00, // -V- 0xFC,0xFC,0x00,0x80,0x00,0xFC,0xFC,0x00,0x03,0x0F,0x0E,0x03,0x0E,0x0F,0x03,0x00, // -W- 0x0C,0x3C,0xF0,0xC0,0xF0,0x3C,0x0C,0x00,0x0C,0x0F,0x03,0x00,0x03,0x0F,0x0C,0x00, // -X- 0x00,0x3C,0x7C,0xC0,0xC0,0x7C,0x3C,0x00,0x00,0x00,0x08,0x0F,0x0F,0x08,0x00,0x00, // -Y- 0x1C,0x0C,0x84,0xC4,0x64,0x3C,0x1C,0x00,0x0E,0x0F,0x09,0x08,0x08,0x0C,0x0E,0x00, // -Z- 0x00,0x00,0xFC,0xFC,0x04,0x04,0x00,0x00,0x00,0x00,0x0F,0x0F,0x08,0x08,0x00,0x00, // -[- 0x38,0x70,0xE0,0xC0,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x03,0x07,0x0E,0x00, // -\- 0x00,0x00,0x04,0x04,0xFC,0xFC,0x00,0x00,0x00,0x00,0x08,0x08,0x0F,0x0F,0x00,0x00, // -]- 0x08,0x0C,0x06,0x03,0x06,0x0C,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, // -^- 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20, // -_- 0x00,0x00,0x03,0x07,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, // -`- 0x00,0xA0,0xA0,0xA0,0xE0,0xC0,0x00,0x00,0x07,0x0F,0x08,0x08,0x07,0x0F,0x08,0x00, // -a- 0x04,0xFC,0xFC,0x20,0x60,0xC0,0x80,0x00,0x08,0x0F,0x07,0x08,0x08,0x0F,0x07,0x00, // -b- 0xC0,0xE0,0x20,0x20,0x20,0x60,0x40,0x00,0x07,0x0F,0x08,0x08,0x08,0x0C,0x04,0x00, // -c- 0x80,0xC0,0x60,0x24,0xFC,0xFC,0x00,0x00,0x07,0x0F,0x08,0x08,0x07,0x0F,0x08,0x00, // -d- 0xC0,0xE0,0xA0,0xA0,0xA0,0xE0,0xC0,0x00,0x07,0x0F,0x08,0x08,0x08,0x0C,0x04,0x00, // -e- 0x40,0xF8,0xFC,0x44,0x0C,0x18,0x00,0x00,0x08,0x0F,0x0F,0x08,0x00,0x00,0x00,0x00, // -f- 0xC0,0xE0,0x20,0x20,0xC0,0xE0,0x20,0x00,0x27,0x6F,0x48,0x48,0x7F,0x3F,0x00,0x00, // -g- 0x04,0xFC,0xFC,0x40,0x20,0xE0,0xC0,0x00,0x08,0x0F,0x0F,0x00,0x00,0x0F,0x0F,0x00, // -h- 0x00,0x00,0x20,0xEC,0xEC,0x00,0x00,0x00,0x00,0x00,0x08,0x0F,0x0F,0x08,0x00,0x00, // -i- 0x00,0x00,0x00,0x00,0x20,0xEC,0xEC,0x00,0x00,0x30,0x70,0x40,0x40,0x7F,0x3F,0x00, // -j- 0x04,0xFC,0xFC,0x80,0xC0,0x60,0x20,0x00,0x08,0x0F,0x0F,0x01,0x03,0x0E,0x0C,0x00, // -k- 0x00,0x00,0x04,0xFC,0xFC,0x00,0x00,0x00,0x00,0x00,0x08,0x0F,0x0F,0x08,0x00,0x00, // -l- 0xE0,0xE0,0x60,0xC0,0x60,0xE0,0xC0,0x00,0x0F,0x0F,0x00,0x0F,0x00,0x0F,0x0F,0x00, // -m- 0x20,0xE0,0xC0,0x20,0x20,0xE0,0xC0,0x00,0x00,0x0F,0x0F,0x00,0x00,0x0F,0x0F,0x00, // -n- 0xC0,0xE0,0x20,0x20,0x20,0xE0,0xC0,0x00,0x07,0x0F,0x08,0x08,0x08,0x0F,0x07,0x00, // -o- 0x20,0xE0,0xC0,0x20,0x20,0xE0,0xC0,0x00,0x40,0x7F,0x7F,0x48,0x08,0x0F,0x07,0x00, // -p- 0xC0,0xE0,0x20,0x20,0xC0,0xE0,0x20,0x00,0x07,0x0F,0x08,0x48,0x7F,0x7F,0x40,0x00, // -q- 0x20,0xE0,0xC0,0x60,0x20,0x60,0xC0,0x00,0x08,0x0F,0x0F,0x08,0x00,0x00,0x00,0x00, // -r- 0x40,0xE0,0xA0,0x20,0x20,0x60,0x40,0x00,0x04,0x0C,0x09,0x09,0x0B,0x0E,0x04,0x00, // -s- 0x20,0x20,0xF8,0xFC,0x20,0x20,0x00,0x00,0x00,0x00,0x07,0x0F,0x08,0x0C,0x04,0x00, // -t- 0xE0,0xE0,0x00,0x00,0xE0,0xE0,0x00,0x00,0x07,0x0F,0x08,0x08,0x07,0x0F,0x08,0x00, // -u- 0x00,0xE0,0xE0,0x00,0x00,0xE0,0xE0,0x00,0x00,0x03,0x07,0x0C,0x0C,0x07,0x03,0x00, // -v- 0xE0,0xE0,0x00,0x00,0x00,0xE0,0xE0,0x00,0x07,0x0F,0x0C,0x07,0x0C,0x0F,0x07,0x00, // -w- 0x20,0x60,0xC0,0x80,0xC0,0x60,0x20,0x00,0x08,0x0C,0x07,0x03,0x07,0x0C,0x08,0x00, // -x- 0xE0,0xE0,0x00,0x00,0x00,0xE0,0xE0,0x00,0x47,0x4F,0x48,0x48,0x68,0x3F,0x1F,0x00, // -y- 0x60,0x60,0x20,0xA0,0xE0,0x60,0x20,0x00,0x0C,0x0E,0x0B,0x09,0x08,0x0C,0x0C,0x00, // -z- 0x00,0x40,0x40,0xF8,0xBC,0x04,0x04,0x00,0x00,0x00,0x00,0x07,0x0F,0x08,0x08,0x00, // -{- 0x00,0x00,0x00,0xBC,0xBC,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0x0F,0x00,0x00,0x00, // -|- 0x00,0x04,0x04,0xBC,0xF8,0x40,0x40,0x00,0x00,0x08,0x08,0x0F,0x07,0x00,0x00,0x00, // -}- 0x08,0x0C,0x04,0x0C,0x08,0x0C,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, // -~- } ; #endif //Tab_Ascii_8x16_CALL1 //=======8x16======================================================================= //#ifdef Tab_Ascii_8x16_CALL2 // #ifdef Display_Num_8x16_CALL const PROGMEM uint8_t Tab_Ascii_8x162[95][16]={ //細體字形 /*-- 文字: --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*-- 文字: ! --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0x00,0x00,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x33,0x30,0x00,0x00,0x00, /*-- 文字: " --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0x10,0x0C,0x06,0x10,0x0C,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*-- 文字: # --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x40,0xC0,0x78,0x40,0xC0,0x78,0x40,0x00,0x04,0x3F,0x04,0x04,0x3F,0x04,0x04,0x00, /*-- 文字: $ --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0x70,0x88,0xFC,0x08,0x30,0x00,0x00,0x00,0x18,0x20,0xFF,0x21,0x1E,0x00,0x00, /*-- 文字: % --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0xF0,0x08,0xF0,0x00,0xE0,0x18,0x00,0x00,0x00,0x21,0x1C,0x03,0x1E,0x21,0x1E,0x00, /*-- 文字: & --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0xF0,0x08,0x88,0x70,0x00,0x00,0x00,0x1E,0x21,0x23,0x24,0x19,0x27,0x21,0x10, /*-- 文字: ' --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x10,0x16,0x0E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*-- 文字: ( --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0x00,0x00,0xE0,0x18,0x04,0x02,0x00,0x00,0x00,0x00,0x07,0x18,0x20,0x40,0x00, /*-- 文字: ) --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0x02,0x04,0x18,0xE0,0x00,0x00,0x00,0x00,0x40,0x20,0x18,0x07,0x00,0x00,0x00, /*-- 文字: * --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x40,0x40,0x80,0xF0,0x80,0x40,0x40,0x00,0x02,0x02,0x01,0x0F,0x01,0x02,0x02,0x00, /*-- 文字: + --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0x00,0x00,0xF0,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x1F,0x01,0x01,0x01,0x00, /*-- 文字: , --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xB0,0x70,0x00,0x00,0x00,0x00,0x00, /*-- 文字: - --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x01,0x01,0x01,0x01, /*-- 文字: . --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,0x00,0x00, /*-- 文字: / --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0x00,0x00,0x00,0x80,0x60,0x18,0x04,0x00,0x60,0x18,0x06,0x01,0x00,0x00,0x00, /*-- 文字: 0 --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x0F,0x10,0x20,0x20,0x10,0x0F,0x00, /*-- 文字: 1 --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0x10,0x10,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00, /*-- 文字: 2 --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0x70,0x08,0x08,0x08,0x88,0x70,0x00,0x00,0x30,0x28,0x24,0x22,0x21,0x30,0x00, /*-- 文字: 3 --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0x30,0x08,0x88,0x88,0x48,0x30,0x00,0x00,0x18,0x20,0x20,0x20,0x11,0x0E,0x00, /*-- 文字: 4 --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0x00,0xC0,0x20,0x10,0xF8,0x00,0x00,0x00,0x07,0x04,0x24,0x24,0x3F,0x24,0x00, /*-- 文字: 5 --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0xF8,0x08,0x88,0x88,0x08,0x08,0x00,0x00,0x19,0x21,0x20,0x20,0x11,0x0E,0x00, /*-- 文字: 6 --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0xE0,0x10,0x88,0x88,0x18,0x00,0x00,0x00,0x0F,0x11,0x20,0x20,0x11,0x0E,0x00, /*-- 文字: 7 --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0x38,0x08,0x08,0xC8,0x38,0x08,0x00,0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00, /*-- 文字: 8 --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0x70,0x88,0x08,0x08,0x88,0x70,0x00,0x00,0x1C,0x22,0x21,0x21,0x22,0x1C,0x00, /*-- 文字: 9 --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x00,0x31,0x22,0x22,0x11,0x0F,0x00, /*-- 文字: : --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0x00,0x00,0xC0,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00, /*-- 文字: ; --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0x00,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x60,0x00,0x00,0x00,0x00, /*-- 文字: < --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0x00,0x80,0x40,0x20,0x10,0x08,0x00,0x00,0x01,0x02,0x04,0x08,0x10,0x20,0x00, /*-- 文字: = --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x00,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x00, /*-- 文字: > --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0x08,0x10,0x20,0x40,0x80,0x00,0x00,0x00,0x20,0x10,0x08,0x04,0x02,0x01,0x00, /*-- 文字: ? --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0x70,0x48,0x08,0x08,0x08,0xF0,0x00,0x00,0x00,0x00,0x30,0x36,0x01,0x00,0x00, /*-- 文字: @ --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0xC0,0x30,0xC8,0x28,0xE8,0x10,0xE0,0x00,0x07,0x18,0x27,0x24,0x23,0x14,0x0B,0x00, /*-- 文字: A --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0x00,0xC0,0x38,0xE0,0x00,0x00,0x00,0x20,0x3C,0x23,0x02,0x02,0x27,0x38,0x20, /*-- 文字: B --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x08,0xF8,0x88,0x88,0x88,0x70,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x11,0x0E,0x00, /*-- 文字: C --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0xC0,0x30,0x08,0x08,0x08,0x08,0x38,0x00,0x07,0x18,0x20,0x20,0x20,0x10,0x08,0x00, /*-- 文字: D --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x08,0xF8,0x08,0x08,0x08,0x10,0xE0,0x00,0x20,0x3F,0x20,0x20,0x20,0x10,0x0F,0x00, /*-- 文字: E --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x20,0x23,0x20,0x18,0x00, /*-- 文字: F --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x00,0x03,0x00,0x00,0x00, /*-- 文字: G --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0xC0,0x30,0x08,0x08,0x08,0x38,0x00,0x00,0x07,0x18,0x20,0x20,0x22,0x1E,0x02,0x00, /*-- 文字: H --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x20,0x3F,0x21,0x01,0x01,0x21,0x3F,0x20, /*-- 文字: I --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00, /*-- 文字: J --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,0x00, /*-- 文字: K --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x08,0xF8,0x88,0xC0,0x28,0x18,0x08,0x00,0x20,0x3F,0x20,0x01,0x26,0x38,0x20,0x00, /*-- 文字: L --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x08,0xF8,0x08,0x00,0x00,0x00,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x20,0x30,0x00, /*-- 文字: M --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x08,0xF8,0xF8,0x00,0xF8,0xF8,0x08,0x00,0x20,0x3F,0x00,0x3F,0x00,0x3F,0x20,0x00, /*-- 文字: N --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x08,0xF8,0x30,0xC0,0x00,0x08,0xF8,0x08,0x20,0x3F,0x20,0x00,0x07,0x18,0x3F,0x00, /*-- 文字: O --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x10,0x20,0x20,0x20,0x10,0x0F,0x00, /*-- 文字: P --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x08,0xF8,0x08,0x08,0x08,0x08,0xF0,0x00,0x20,0x3F,0x21,0x01,0x01,0x01,0x00,0x00, /*-- 文字: Q --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x18,0x24,0x24,0x38,0x50,0x4F,0x00, /*-- 文字: R --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x08,0xF8,0x88,0x88,0x88,0x88,0x70,0x00,0x20,0x3F,0x20,0x00,0x03,0x0C,0x30,0x20, /*-- 文字: S --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0x70,0x88,0x08,0x08,0x08,0x38,0x00,0x00,0x38,0x20,0x21,0x21,0x22,0x1C,0x00, /*-- 文字: T --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x18,0x08,0x08,0xF8,0x08,0x08,0x18,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00, /*-- 文字: U --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00, /*-- 文字: V --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x08,0x78,0x88,0x00,0x00,0xC8,0x38,0x08,0x00,0x00,0x07,0x38,0x0E,0x01,0x00,0x00, /*-- 文字: W --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0xF8,0x08,0x00,0xF8,0x00,0x08,0xF8,0x00,0x03,0x3C,0x07,0x00,0x07,0x3C,0x03,0x00, /*-- 文字: X --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x08,0x18,0x68,0x80,0x80,0x68,0x18,0x08,0x20,0x30,0x2C,0x03,0x03,0x2C,0x30,0x20, /*-- 文字: Y --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x08,0x38,0xC8,0x00,0xC8,0x38,0x08,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00, /*-- 文字: Z --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x10,0x08,0x08,0x08,0xC8,0x38,0x08,0x00,0x20,0x38,0x26,0x21,0x20,0x20,0x18,0x00, /*-- 文字: [ --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0x00,0x00,0xFE,0x02,0x02,0x02,0x00,0x00,0x00,0x00,0x7F,0x40,0x40,0x40,0x00, /*-- 文字: \ --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0x0C,0x30,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x06,0x38,0xC0,0x00, /*-- 文字: ] --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0x02,0x02,0x02,0xFE,0x00,0x00,0x00,0x00,0x40,0x40,0x40,0x7F,0x00,0x00,0x00, /*-- 文字: ^ --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0x00,0x04,0x02,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*-- 文字: _ --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80, /*-- 文字: ` --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*-- 文字: a --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x19,0x24,0x22,0x22,0x22,0x3F,0x20, /*-- 文字: b --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x08,0xF8,0x00,0x80,0x80,0x00,0x00,0x00,0x00,0x3F,0x11,0x20,0x20,0x11,0x0E,0x00, /*-- 文字: c --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0x00,0x00,0x80,0x80,0x80,0x00,0x00,0x00,0x0E,0x11,0x20,0x20,0x20,0x11,0x00, /*-- 文字: d --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0x00,0x00,0x80,0x80,0x88,0xF8,0x00,0x00,0x0E,0x11,0x20,0x20,0x10,0x3F,0x20, /*-- 文字: e --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x22,0x22,0x22,0x22,0x13,0x00, /*-- 文字: f --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0x80,0x80,0xF0,0x88,0x88,0x88,0x18,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00, /*-- 文字: g --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x6B,0x94,0x94,0x94,0x93,0x60,0x00, /*-- 文字: h --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x08,0xF8,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20, /*-- 文字: i --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0x80,0x98,0x98,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00, /*-- 文字: j --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0x00,0x00,0x80,0x98,0x98,0x00,0x00,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00, /*-- 文字: k --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x08,0xF8,0x00,0x00,0x80,0x80,0x80,0x00,0x20,0x3F,0x24,0x02,0x2D,0x30,0x20,0x00, /*-- 文字: l --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0x08,0x08,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00, /*-- 文字: m --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x20,0x3F,0x20,0x00,0x3F,0x20,0x00,0x3F, /*-- 文字: n --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20, /*-- 文字: o --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00, /*-- 文字: p --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x80,0x80,0x00,0x80,0x80,0x00,0x00,0x00,0x80,0xFF,0xA1,0x20,0x20,0x11,0x0E,0x00, /*-- 文字: q --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x0E,0x11,0x20,0x20,0xA0,0xFF,0x80, /*-- 文字: r --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x80,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x20,0x20,0x3F,0x21,0x20,0x00,0x01,0x00, /*-- 文字: s --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x33,0x24,0x24,0x24,0x24,0x19,0x00, /*-- 文字: t --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0x80,0x80,0xE0,0x80,0x80,0x00,0x00,0x00,0x00,0x00,0x1F,0x20,0x20,0x00,0x00, /*-- 文字: u --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x80,0x80,0x00,0x00,0x00,0x80,0x80,0x00,0x00,0x1F,0x20,0x20,0x20,0x10,0x3F,0x20, /*-- 文字: v --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x00,0x01,0x0E,0x30,0x08,0x06,0x01,0x00, /*-- 文字: w --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x80,0x80,0x00,0x80,0x00,0x80,0x80,0x80,0x0F,0x30,0x0C,0x03,0x0C,0x30,0x0F,0x00, /*-- 文字: x --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x31,0x2E,0x0E,0x31,0x20,0x00, /*-- 文字: y --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x80,0x81,0x8E,0x70,0x18,0x06,0x01,0x00, /*-- 文字: z --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x21,0x30,0x2C,0x22,0x21,0x30,0x00, /*-- 文字: { --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0x00,0x00,0x00,0x80,0x7C,0x02,0x02,0x00,0x00,0x00,0x00,0x00,0x3F,0x40,0x40, /*-- 文字: | --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00, /*-- 文字: } --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0x02,0x02,0x7C,0x80,0x00,0x00,0x00,0x00,0x40,0x40,0x3F,0x00,0x00,0x00,0x00, /*-- 文字: ~ --*/ /*-- Comic Sans MS12; 此字體下對應的點陣為：寬x高=8x16 --*/ 0x00,0x06,0x01,0x01,0x02,0x02,0x04,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00 }; ///#endif //#endif //Tab_Ascii_8x16_CALL1 //=======5x7======================================================================= //#ifdef Tab_Ascii_5x7_CALL const PROGMEM uint8_t Tab_Ascii_5x71[95][5]={ /*全體ASCII 列表:5x7點陣*/ 0x00,0x00,0x00,0x00,0x00,//space 0x00,0x00,0x4f,0x00,0x00,//! 0x00,0x07,0x00,0x07,0x00,//" 0x14,0x7f,0x14,0x7f,0x14,//# 0x24,0x2a,0x7f,0x2a,0x12,//$ 0x23,0x13,0x08,0x64,0x62,//% 0x36,0x49,0x55,0x22,0x50,//& 0x00,0x05,0x07,0x00,0x00,//] 0x00,0x1c,0x22,0x41,0x00,//( 0x00,0x41,0x22,0x1c,0x00,//) 0x14,0x08,0x3e,0x08,0x14,//* 0x08,0x08,0x3e,0x08,0x08,//+ 0x00,0x50,0x30,0x00,0x00,//, 0x08,0x08,0x08,0x08,0x08,//- 0x00,0x60,0x60,0x00,0x00,//. 0x20,0x10,0x08,0x04,0x02,/// 0x3e,0x51,0x49,0x45,0x3e,//0 0x00,0x42,0x7f,0x40,0x00,//1 0x42,0x61,0x51,0x49,0x46,//2 0x21,0x41,0x45,0x4b,0x31,//3 0x18,0x14,0x12,0x7f,0x10,//4 0x27,0x45,0x45,0x45,0x39,//5 0x3c,0x4a,0x49,0x49,0x30,//6 0x01,0x71,0x09,0x05,0x03,//7 0x36,0x49,0x49,0x49,0x36,//8 0x06,0x49,0x49,0x29,0x1e,//9 0x00,0x36,0x36,0x00,0x00,//: 0x00,0x56,0x36,0x00,0x00,//; 0x08,0x14,0x22,0x41,0x00,//< 0x14,0x14,0x14,0x14,0x14,//= 0x00,0x41,0x22,0x14,0x08,//> 0x02,0x01,0x51,0x09,0x06,//? 0x32,0x49,0x79,0x41,0x3e,//@ 0x7e,0x11,0x11,0x11,0x7e,//A 0x7f,0x49,0x49,0x49,0x36,//B 0x3e,0x41,0x41,0x41,0x22,//C 0x7f,0x41,0x41,0x22,0x1c,//D 0x7f,0x49,0x49,0x49,0x41,//E 0x7f,0x09,0x09,0x09,0x01,//F 0x3e,0x41,0x49,0x49,0x7a,//G 0x7f,0x08,0x08,0x08,0x7f,//H 0x00,0x41,0x7f,0x41,0x00,//I 0x20,0x40,0x41,0x3f,0x01,//J 0x7f,0x08,0x14,0x22,0x41,//K 0x7f,0x40,0x40,0x40,0x40,//L 0x7f,0x02,0x0c,0x02,0x7f,//M 0x7f,0x04,0x08,0x10,0x7f,//N 0x3e,0x41,0x41,0x41,0x3e,//O 0x7f,0x09,0x09,0x09,0x06,//P 0x3e,0x41,0x51,0x21,0x5e,//Q 0x7f,0x09,0x19,0x29,0x46,//R 0x46,0x49,0x49,0x49,0x31,//S 0x01,0x01,0x7f,0x01,0x01,//T 0x3f,0x40,0x40,0x40,0x3f,//U 0x1f,0x20,0x40,0x20,0x1f,//V 0x3f,0x40,0x38,0x40,0x3f,//W 0x63,0x14,0x08,0x14,0x63,//X 0x07,0x08,0x70,0x08,0x07,//Y 0x61,0x51,0x49,0x45,0x43,//Z 0x00,0x7f,0x41,0x41,0x00,//[ 0x02,0x04,0x08,0x10,0x20,//\ 0x00,0x41,0x41,0x7f,0x00,//] 0x04,0x02,0x01,0x02,0x04,//^ 0x40,0x40,0x40,0x40,0x40,//_ 0x01,0x02,0x04,0x00,0x00,//` 0x20,0x54,0x54,0x54,0x78,//a 0x7f,0x48,0x48,0x48,0x30,//b 0x38,0x44,0x44,0x44,0x44,//c 0x30,0x48,0x48,0x48,0x7f,//d 0x38,0x54,0x54,0x54,0x58,//e 0x00,0x08,0x7e,0x09,0x02,//f 0x48,0x54,0x54,0x54,0x3c,//g 0x7f,0x08,0x08,0x08,0x70,//h 0x00,0x00,0x7a,0x00,0x00,//i 0x20,0x40,0x40,0x3d,0x00,//j 0x7f,0x20,0x28,0x44,0x00,//k 0x00,0x41,0x7f,0x40,0x00,//l 0x7c,0x04,0x38,0x04,0x7c,//m 0x7c,0x08,0x04,0x04,0x78,//n 0x38,0x44,0x44,0x44,0x38,//o 0x7c,0x14,0x14,0x14,0x08,//p 0x08,0x14,0x14,0x14,0x7c,//q 0x7c,0x08,0x04,0x04,0x08,//r 0x48,0x54,0x54,0x54,0x24,//s 0x04,0x04,0x3f,0x44,0x24,//t 0x3c,0x40,0x40,0x40,0x3c,//u 0x1c,0x20,0x40,0x20,0x1c,//v 0x3c,0x40,0x30,0x40,0x3c,//w 0x44,0x28,0x10,0x28,0x44,//x 0x04,0x48,0x30,0x08,0x04,//y 0x44,0x64,0x54,0x4c,0x44,//z 0x08,0x36,0x41,0x41,0x00,//{ 0x00,0x00,0x77,0x00,0x00,//| 0x00,0x41,0x41,0x36,0x08,//} 0x04,0x02,0x02,0x02,0x01,//~ }; //#endif //Tab_Ascii_5x7_CALL uint8 zhuang1[]={ /*-- 文字: 狀 --*/ /*-- 宋體12; 此字體下對應的點陣為：寬x高=16x16 --*/ 0x08,0x30,0x00,0xFF,0x20,0x20,0x20,0x20,0xFF,0x20,0xE1,0x26,0x2C,0x20,0x20,0x00, 0x04,0x02,0x01,0xFF,0x40,0x20,0x18,0x07,0x00,0x00,0x03,0x0C,0x30,0x60,0x20,0x00 }; uint8 tai1[]={ /*-- 文字: 態 --*/ /*-- 宋體12; 此字體下對應的點陣為：寬x高=16x16 --*/ 0x00,0x04,0x04,0x04,0x84,0x44,0x34,0x4F,0x94,0x24,0x44,0x84,0x84,0x04,0x00,0x00, 0x00,0x60,0x39,0x01,0x00,0x3C,0x40,0x42,0x4C,0x40,0x40,0x70,0x04,0x09,0x31,0x00 }; uint8 shi1[]={ /*-- 文字: 使 --*/ /*-- 宋體12; 此字體下對應的點陣為：寬x高=16x16 --*/ 0x40,0x20,0xF0,0x1C,0x07,0xF2,0x94,0x94,0x94,0xFF,0x94,0x94,0x94,0xF4,0x04,0x00, 0x00,0x00,0x7F,0x00,0x40,0x41,0x22,0x14,0x0C,0x13,0x10,0x30,0x20,0x61,0x20,0x00 }; uint8 yong1[]={ /*-- 文字: 用 --*/ /*-- 宋體12; 此字體下對應的點陣為：寬x高=16x16 --*/ 0x00,0x00,0x00,0xFE,0x22,0x22,0x22,0x22,0xFE,0x22,0x22,0x22,0x22,0xFE,0x00,0x00, 0x80,0x40,0x30,0x0F,0x02,0x02,0x02,0x02,0xFF,0x02,0x02,0x42,0x82,0x7F,0x00,0x00 }; //x=9 y=16 點陣 0-9 const PROGMEM uint8_t lcd_numbers_lit[]={ 0x00,0xE0,0xE0,0x60,0x20,0x60,0xE0,0xE0,0x00,//0 0x00,0x7F,0x7F,0x60,0x40,0x60,0x7F,0x7F,0x00, 0x00,0x00,0x40,0x40,0xE0,0xE0,0x00,0x00,0x00,//1 0x00,0x00,0x00,0x00,0x7F,0x7F,0x00,0x00,0x00, 0x00,0xE0,0xE0,0x20,0x20,0xE0,0xE0,0xC0,0x00,//2 0x00,0x71,0x79,0x78,0x5E,0x47,0x43,0x41,0x00, 0x00,0xE0,0xE0,0x20,0x20,0xE0,0xE0,0xC0,0x00,//3 0x00,0x78,0x78,0x42,0x47,0x7F,0x7D,0x39,0x00, 0x00,0x00,0x00,0x80,0xE0,0xE0,0xE0,0x00,0x00,//4 0x00,0x0E,0x0F,0x0B,0x7F,0x7F,0x7F,0x08,0x00, 0x00,0xE0,0xE0,0xE0,0x20,0x20,0x20,0x20,0x00,//5 0x00,0x73,0x73,0x43,0x41,0x7F,0x7F,0x3E,0x00, 0x00,0xE0,0xE0,0x60,0x20,0x60,0x60,0x60,0x00,//6 0x00,0x7F,0x7F,0x43,0x43,0x7F,0x7E,0x3C,0x00, 0x00,0x20,0x20,0x20,0xA0,0xE0,0xE0,0x60,0x00,//7 0x00,0x00,0x40,0x78,0x7F,0x0F,0x01,0x00,0x00, 0x00,0xE0,0xE0,0x20,0x20,0x20,0xE0,0xE0,0x00,//8 0x00,0x7D,0x7D,0x47,0x42,0x47,0x7D,0x7D,0x00, 0x00,0xE0,0xE0,0x20,0x20,0xE0,0xE0,0x80,0x00,//9 0x00,0x67,0x6F,0x4C,0x6C,0x7F,0x3F,0x0F,0x00 }; //x=12 y=16 點陣 0-9數字 const PROGMEM uint8_t lcd_numbers[]={ 0x00,0xF0,0xFC,0xFC,0x0E,0x02,0x02,0x0E,0xFC,0xFC,0xF0,0x00,//0 0x00,0x07,0x3F,0x3F,0x70,0x40,0x40,0x70,0x3F,0x3F,0x07,0x00, 0x00,0x00,0x00,0x08,0x08,0xFC,0xFE,0xFE,0x00,0x00,0x00,0x00,//1 0x00,0x00,0x00,0x00,0x00,0x7F,0x7F,0x7F,0x00,0x00,0x00,0x00, 0x00,0x38,0x3C,0x3E,0x06,0x02,0x86,0xFE,0xFC,0x78,0x00,0x00,//2 0x00,0x60,0x78,0x7C,0x5E,0x4F,0x43,0x41,0x40,0x40,0x00,0x00, 0x00,0x18,0x1C,0x1E,0x86,0x82,0xC6,0xFE,0x7C,0x38,0x00,0x00,//3 0x00,0x1C,0x3C,0x7C,0x60,0x40,0x61,0x7F,0x3F,0x1E,0x00,0x00, 0x00,0x00,0x80,0xC0,0xF0,0x3C,0xFE,0xFE,0xFE,0x00,0x00,0x00,//4 0x00,0x06,0x07,0x05,0x04,0x04,0x7F,0x7F,0x7F,0x04,0x04,0x00, 0x00,0x00,0xFE,0xFE,0xFE,0x62,0x62,0xE2,0xE2,0x82,0x00,0x00,//5 0x00,0x18,0x38,0x78,0x60,0x40,0x60,0x7F,0x3F,0x1F,0x00,0x00, 0x00,0xF0,0xFC,0xFC,0xCE,0x42,0xC6,0xCE,0x8E,0x0C,0x00,0x00,//6 0x00,0x0F,0x3F,0x7F,0x60,0x40,0x60,0x7F,0x3F,0x1F,0x00,0x00, 0x00,0x02,0x02,0x02,0x02,0x82,0xF2,0xFE,0x7E,0x0E,0x00,0x00,//7 0x00,0x00,0x00,0x60,0x7C,0x7F,0x1F,0x03,0x00,0x00,0x00,0x00, 0x00,0x38,0x7C,0x7E,0xC6,0x82,0x82,0xC6,0x7E,0x7C,0x38,0x00,//8 0x00,0x1E,0x3F,0x7F,0x61,0x40,0x40,0x61,0x7F,0x3F,0x1E,0x00, 0x00,0xF8,0xFC,0xFE,0x06,0x02,0x06,0xFE,0xFC,0xF0,0x00,0x00,//9 0x00,0x30,0x71,0x73,0x63,0x42,0x73,0x3F,0x1F,0x07,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//. 0x00,0x00,0x00,0x38,0x38,0x38,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x00,//- 0x00,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x00 }; const PROGMEM uint8_t Tab_Ascii_5x72[95][5]={ /*全體ASCII 列表:5x7點陣*/ 0x00,0x00,0x00,0x00,0x00,//space 0x00,0x00,0x4f,0x00,0x00,//! 0x00,0x07,0x00,0x07,0x00,//" 0x14,0x7f,0x14,0x7f,0x14,//# 0x24,0x2a,0x7f,0x2a,0x12,//$ 0x23,0x13,0x08,0x64,0x62,//% 0x36,0x49,0x55,0x22,0x50,//& 0x00,0x05,0x07,0x00,0x00,//] 0x00,0x1c,0x22,0x41,0x00,//( 0x00,0x41,0x22,0x1c,0x00,//) 0x14,0x08,0x3e,0x08,0x14,//* 0x08,0x08,0x3e,0x08,0x08,//+ 0x00,0x50,0x30,0x00,0x00,//, 0x08,0x08,0x08,0x08,0x08,//- 0x00,0x60,0x60,0x00,0x00,//. 0x20,0x10,0x08,0x04,0x02,/// 0x3e,0x51,0x49,0x45,0x3e,//0 0x00,0x42,0x7f,0x40,0x00,//1 0x42,0x61,0x51,0x49,0x46,//2 0x21,0x41,0x45,0x4b,0x31,//3 0x18,0x14,0x12,0x7f,0x10,//4 0x27,0x45,0x45,0x45,0x39,//5 0x3c,0x4a,0x49,0x49,0x30,//6 0x01,0x71,0x09,0x05,0x03,//7 0x36,0x49,0x49,0x49,0x36,//8 0x06,0x49,0x49,0x29,0x1e,//9 0x00,0x36,0x36,0x00,0x00,//: 0x00,0x56,0x36,0x00,0x00,//; 0x08,0x14,0x22,0x41,0x00,//< 0x14,0x14,0x14,0x14,0x14,//= 0x00,0x41,0x22,0x14,0x08,//> 0x02,0x01,0x51,0x09,0x06,//? 0x32,0x49,0x79,0x41,0x3e,//@ 0x7e,0x11,0x11,0x11,0x7e,//A 0x7f,0x49,0x49,0x49,0x36,//B 0x3e,0x41,0x41,0x41,0x22,//C 0x7f,0x41,0x41,0x22,0x1c,//D 0x7f,0x49,0x49,0x49,0x41,//E 0x7f,0x09,0x09,0x09,0x01,//F 0x3e,0x41,0x49,0x49,0x7a,//G 0x7f,0x08,0x08,0x08,0x7f,//H 0x00,0x41,0x7f,0x41,0x00,//I 0x20,0x40,0x41,0x3f,0x01,//J 0x7f,0x08,0x14,0x22,0x41,//K 0x7f,0x40,0x40,0x40,0x40,//L 0x7f,0x02,0x0c,0x02,0x7f,//M 0x7f,0x04,0x08,0x10,0x7f,//N 0x3e,0x41,0x41,0x41,0x3e,//O 0x7f,0x09,0x09,0x09,0x06,//P 0x3e,0x41,0x51,0x21,0x5e,//Q 0x7f,0x09,0x19,0x29,0x46,//R 0x46,0x49,0x49,0x49,0x31,//S 0x01,0x01,0x7f,0x01,0x01,//T 0x3f,0x40,0x40,0x40,0x3f,//U 0x1f,0x20,0x40,0x20,0x1f,//V 0x3f,0x40,0x38,0x40,0x3f,//W 0x63,0x14,0x08,0x14,0x63,//X 0x07,0x08,0x70,0x08,0x07,//Y 0x61,0x51,0x49,0x45,0x43,//Z 0x00,0x7f,0x41,0x41,0x00,//[ 0x02,0x04,0x08,0x10,0x20,// 0x00,0x41,0x41,0x7f,0x00,//] 0x04,0x02,0x01,0x02,0x04,//^ 0x40,0x40,0x40,0x40,0x40,//_ 0x01,0x02,0x04,0x00,0x00,//` 0x20,0x54,0x54,0x54,0x78,//a 0x7f,0x48,0x48,0x48,0x30,//b 0x38,0x44,0x44,0x44,0x44,//c 0x30,0x48,0x48,0x48,0x7f,//d 0x38,0x54,0x54,0x54,0x58,//e 0x00,0x08,0x7e,0x09,0x02,//f 0x48,0x54,0x54,0x54,0x3c,//g 0x7f,0x08,0x08,0x08,0x70,//h 0x00,0x00,0x7a,0x00,0x00,//i 0x20,0x40,0x40,0x3d,0x00,//j 0x7f,0x20,0x28,0x44,0x00,//k 0x00,0x41,0x7f,0x40,0x00,//l 0x7c,0x04,0x38,0x04,0x7c,//m 0x7c,0x08,0x04,0x04,0x78,//n 0x38,0x44,0x44,0x44,0x38,//o 0x7c,0x14,0x14,0x14,0x08,//p 0x08,0x14,0x14,0x14,0x7c,//q 0x7c,0x08,0x04,0x04,0x08,//r 0x48,0x54,0x54,0x54,0x24,//s 0x04,0x04,0x3f,0x44,0x24,//t 0x3c,0x40,0x40,0x40,0x3c,//u 0x1c,0x20,0x40,0x20,0x1c,//v 0x3c,0x40,0x30,0x40,0x3c,//w 0x44,0x28,0x10,0x28,0x44,//x 0x04,0x48,0x30,0x08,0x04,//y 0x44,0x64,0x54,0x4c,0x44,//z 0x08,0x36,0x41,0x41,0x00,//{ 0x00,0x00,0x77,0x00,0x00,//| 0x00,0x41,0x41,0x36,0x08,//} 0x04,0x02,0x02,0x02,0x01,//~ }; /////////////// #define Start_T1 TCCR1B|=_BV(CS11);TCNT1=0//復位預計分頻器并開啟定時器T1 #define Stop_T1 TCCR1B&=~_BV(CS11) //關閉定時器T1 //數碼管的段碼編碼 unsigned char table[10] = {0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x07,0x7f,0x6f}; volatile unsigned char i,j,k; volatile unsigned char IRcode; //定義一個長度為4字節的無符號long類型變量來存儲代碼 volatile unsigned char IR_OK=0; //IR信號接收有效 當程序響應接收以后請馬上清零 這樣才會繼續接收下一IR碼 volatile unsigned char IR_con=0; //IR信號當前接收位 0時表示第0位即同步碼(4.5ms高電平) volatile unsigned int Pulse_length=0; //捕獲的脈沖寬度 volatile unsigned char ICP_Parity=0; //捕獲中斷奇偶次計數 1時為偶次 并在此時判斷脈寬 volatile unsigned char address; volatile unsigned char code_data; volatile unsigned char code_data1; unsigned char clrbit; #define FREQ 8 //定義單片機工作頻率為 4M /////////////// //**************************************************************** // 函數名稱：DelayLcd // 函數功能：延時 // 入口參數： // 出口參數： //***************************************************************** void DelayLcd(uint16 i) { uint16 j; for(j=200;j>0;j--) for(;i>0;i--); //while(i--); } //**************************************************************** // 函數名稱：LcdWriteCommand // 函數功能：寫指令到LCD模塊 // 入口參數：數據 // 出口參數： //***************************************************************** void LcdWriteCommand(uint8 data1) // { uint8 i ; P_LCDCS0 ; P_LCDRS0 ; for(i=8;i>0;i--) { P_LCDCLK0; if(data1&0x80) P_LCDDAT1; else P_LCDDAT0; P_LCDCLK1; data1 <<= 1; } } //**************************************************************** // 函數名稱：LcdWritedata // 函數功能：寫數據到LCD模塊 // 入口參數：數據 // 出口參數： //***************************************************************** void LcdWritedata(uint8 data1) // { uint8 i; P_LCDCS0 ; P_LCDRS1 ; for(i=8;i>0;i--) { P_LCDCLK0; if(data1&0x80) P_LCDDAT1; else P_LCDDAT0; P_LCDCLK1; data1 <<= 1; } } //**************************************************************** // 函數名稱：Lcd_SetAddr // 函數功能：設置LCD顯示地址 // 入口參數： 頁地址 列地址 // 出口參數： //***************************************************************** void Lcd_SetAddr(uint8 page,uint8 column) { //LcdWriteCommand(0xb0 | (y+yy)); //LcdWriteCommand(0x10 | (x>>4)); //LcdWriteCommand(0x00 | (x&0x0f)); //P_LCDCS0 ; LcdWriteCommand(0xb0|page); /*設置頁地址*/ LcdWriteCommand((column>>4)|0x10); /*設置列地址的高4位*/ LcdWriteCommand(column&0x0f); /*設置列地址的低4位*/ } ////// void Display_Graphic_32x2(uint8 page,uint8 column,PROGMEM uint8_t *dp) // 電池顯示 0、2、4、6、8、10 { uint8 i,j; uint8 page_address; uint8 column_address_L,column_address_H; page_address = 0xb0|page; column_address_L =(column&0x0f); column_address_H =(column>>4)|0x10; P_LCDCS0 ; for(j=0;j<2;j++) { LcdWriteCommand(page_address+j); /*設置頁地址*/ LcdWriteCommand(column_address_H); /*設置列地址的高4位*/ LcdWriteCommand(column_address_L); /*設置列地址的低4位*/ for (i=32;i>0;i--) //寫32行 { LcdWritedata(pgm_read_byte(dp++)); /*寫數據到LCD,每寫完一個8位的數據后列地址自動加1*/ } LcdWritedata(0x00); } P_LCDCS1 ; } //#ifdef Display_Graphic_32x32_CALL void Display_Graphic_32x32(uint8 page,uint8 column,PROGMEM uint8_t *dp) { uint8 i,j; uint8 page_address; uint8 column_address_L,column_address_H; page_address = 0xb0|page; column_address_L =(column&0x0f); column_address_H =(column>>4)|0x10; P_LCDCS0 ; &
標簽： 程序
上傳時間： 2016-03-03
上傳用戶：彥 yan
ARINC429總線協議是美國航空電子工程委員會(Airlines Engineering Committee)于1977年7月提出的，并于同年發表并獲得批準使用，它的全稱是數字式信息傳輸系統(Digital Information Transmission System ) 。協議標準規定了航空電子設備及有關系統間的數字信息傳輸要求。ARINC429廣泛應用在先進的民航客機中，如B-737、B-757、B-767，俄制軍用飛機也選用了類似的技術。 ARINC429總線結構簡單、性能穩定，抗干擾性強。最大的優勢在于可靠性高。飛機上的ARINC429數據總線，用于在系統和設備之間傳送上千種不同類型的參數，如航向、真空速、馬赫數等。
標簽： 429總線協議
上傳時間： 2016-08-17
上傳用戶：w50403
/****************temic*********t5557***********************************/ #include <at892051.h> #include <string.h> #include <intrins.h> #include <stdio.h> #define uchar unsigned char #define uint unsigned int #define ulong unsigned long //STC12C2051AD的SFR定義 sfr WDT_CONTR = 0xe1;//stc2051的看門狗?????? /**********全局常量************/ //寫卡的命令 #define write_command0 0//寫密碼 #define write_command1 1//寫配置字 #define write_command2 2//密碼寫數據 #define write_command3 3//喚醒 #define write_command4 4//停止命令 #define TRUE 1 #define FALSE 0 #define OK 0 #define ERROR 255 //讀卡的時間參數us #define ts_min 250//270*11.0592/12=249//取近似的整數 #define ts_max 304//330*11.0592/12=304 #define t1_min 73//90*11.0592/12=83:-10調整 #define t1_max 156//180*11.0592/12=166 #define t2_min 184//210*11.0592/12=194 #define t2_max 267//300*11.0592/12=276 //***********不采用中斷處理:采用查詢的方法讀卡時關所有中斷****************/ sbit p_U2270B_Standby = P3^5;//p_U2270B_Standby PIN=13 sbit p_U2270B_CFE = P3^3;//p_U2270B_CFE PIN=6 sbit p_U2270B_OutPut = P3^7;//p_U2270B_OutPut PIN=2 sbit wtd_sck = P1^7;//SPI總線 sbit wtd_si = P1^3; sbit wtd_so = P1^2; sbit iic_data = P1^2;//lcd IIC sbit iic_clk = P1^7; sbit led_light = P1^6;//測試綠燈 sbit led_light1 = P1^5;//測試紅燈 sbit led_light_ok = P1^1;//讀卡成功標志 sbit fengmingqi = P1^5; /***********全局變量************************************/ uchar data Nkey_a[4] = {0xA0, 0xA1, 0xA2, 0xA3};//初始密碼 //uchar idata card_snr[4]; //配置字 uchar data bankdata[28] = {1,2,3,4,5,6,7,1,2,3,4,5,6,7,1,2,3,4,5,6,7,1,2,3,4,5,6,7}; //存儲卡上用戶數據(1-7)7*4=28 uchar data cominceptbuff[6] = {1,2,3,4,5,6};//串口接收數組ram uchar command; //第一個命令 uchar command1;// //uint temp; uchar j,i; uchar myaddr = 8; //uchar ywqz_count,time_count; //ywqz jishu: uchar bdata DATA; sbit BIT0 = DATA^0; sbit BIT1 = DATA^1; sbit BIT2 = DATA^2; sbit BIT3 = DATA^3; sbit BIT4 = DATA^4; sbit BIT5 = DATA^5; sbit BIT6 = DATA^6; sbit BIT7 = DATA^7; uchar bdata DATA1; sbit BIT10 = DATA1^0; sbit BIT11 = DATA1^1; sbit BIT12 = DATA1^2; sbit BIT13 = DATA1^3; sbit BIT14 = DATA1^4; sbit BIT15 = DATA1^5; sbit BIT16 = DATA1^6; sbit BIT17 = DATA1^7; bit i_CurrentLevel;//i_CurrentLevel BIT 00H(Saves current level of OutPut pin of U2270B) bit timer1_end; bit read_ok = 0; //緩存定時值,因用同一個定時器 union HLint { uint W; struct { uchar H;uchar L; } B; };//union HLint idata a union HLint data a; //緩存定時值,因用同一個定時器 union HLint0 { uint W; struct { uchar H; uchar L; } B; };//union HLint idata a union HLint0 data b; /**********************函數原型*****************/ //讀寫操作 void f_readcard(void);//全部讀出1~7 AOR喚醒 void f_writecard(uchar x);//根據命令寫不同的內容和操作 void f_clearpassword(void);//清除密碼 void f_changepassword(void);//修改密碼 //功能子函數 void write_password(uchar data *data p);//寫初始密碼或數據 void write_block(uchar x,uchar data *data p);//不能用通用指針 void write_bit(bit x);//寫位 /*子函數區*****************************************************/ void delay_2(uint x) //延時,時間x*10us@12mhz,最小20us@12mhz { x--; x--; while(x) { _nop_(); _nop_(); x--; } _nop_();//WDT_CONTR=0X3C;不能頻繁的復位 _nop_(); } ///////////////////////////////////////////////////////////////////// void initial(void) { SCON = 0x50; //串口方式1,允許接收 //SCON =0x50; //01010000B:10位異步收發,波特率可變,SM2=0不用接收到有效停止位才RI=1, //REN=1允許接收 TMOD = 0x21; //定時器1 定時方式2(8位),定時器0 定時方式1(16位) TCON = 0x40; //設定時器1 允許開始計時(IT1=1) TH1 = 0xfD; //FB 18.432MHz 9600 波特率 TL1 = 0xfD; //fd 11.0592 9600 IE = 0X90; //EA=ES=1 TR1 = 1; //啟動定時器 WDT_CONTR = 0x3c;//使能看門狗 p_U2270B_Standby = 0;//單電源 PCON = 0x00; IP = 0x10;//uart you xian XXXPS PT1 PX1 PT0 PX0 led_light1 = 1; led_light = 0; p_U2270B_OutPut = 1; } /************************************************/ void f_readcard()//讀卡 { EA = 0;//全關,防止影響跳變的定時器計時 WDT_CONTR = 0X3C;//喂狗 p_U2270B_CFE = 1;// delay_2(232); //>2.5ms /* // aor 用喚醒功能來防碰撞 p_U2270B_CFE = 0; delay_2(18);//start gap>150us write_bit(1);//10=操作碼讀0頁 write_bit(0); write_password(&bankdata[24]);//密碼block7 p_U2270B_CFE =1 ;// delay_2(516);//編程及確認時間5.6ms */ WDT_CONTR = 0X3C;//喂狗 led_light = 0; b.W = 0; while(!(read_ok == 1)) { //while(p_U2270B_OutPut);//等一個穩定的低電平?超時判斷? while(!p_U2270B_OutPut);//等待上升沿的到來同步信號檢測1 TR0 = 1; //deng xia jiang while(p_U2270B_OutPut);//等待下降沿 TR0 = 0; a.B.H = TH0; a.B.L = TL0; TH0 = TL0 = 0; TR0 = 1;//定時器晚啟動10個周期 //同步頭 if((324 < a.W) && (a.W < 353)) ;//檢測同步信號1 else { TR0 = 0; TH0 = TL0 = 0; goto read_error; } //等待上升沿 while(!p_U2270B_OutPut); TR0 = 0; a.B.H = TH0; a.B.L = TL0; TH0 = TL0 = 0; TR0 = 1;//b.N1<<=8; if(a.B.L < 195);//0.5p else { TR0 = 0; TH0 = TL0 = 0; goto read_error; } //讀0~7塊的數據 for(j = 0;j < 28;j++) { //uchar i; for(i = 0;i < 16;i++)//8個位 { //等待下降沿的到來 while(p_U2270B_OutPut); TR0 = 0; a.B.H = TH0; a.B.L = TL0; TH0 = TL0 = 0; TR0 = 1; if(t2_max < a.W/*)&&(a.W < t2_max)*/)//1P { b.W >>= 2;//先左移再賦值 b.B.L += 0xc0; i++; } else if(t1_min < a.B.L/*)&&(a.B.L < t1_max)*/)//0.5p { b.W >>= 1; b.B.L += 0x80; } else { TR0 = 0; TH0 = TL0 = 0; goto read_error; } i++; while(!p_U2270B_OutPut);//上升 TR0 = 0; a.B.H = TH0; a.B.L = TL0; TH0 = TL0 = 0; TR0 = 1; if(t2_min < a.W/*)&&(a.W < t2_max)*/)//1P { b.W >>= 2; i++; } else if(t1_min < a.B.L/*a.W)&&(a.B.L < t1_max)*/)//0.5P //else if(!(a.W==0)) { b.W >>= 1; //temp+=0x00; //led_light1=0;led_light=1;delay_2(40000); } else { TR0 = 0; TH0 = TL0 = 0; goto read_error; } i++; } //取出奇位 DATA = b.B.L; BIT13 = BIT7; BIT12 = BIT5; BIT11 = BIT3; BIT10 = BIT1; DATA = b.B.H; BIT17 = BIT7; BIT16 = BIT5; BIT15 = BIT3; BIT14 = BIT1; bankdata[j] = DATA1; } read_ok = 1;//讀卡完成了 read_error: _nop_(); } } /***************************************************/ void f_writecard(uchar x)//寫卡 { p_U2270B_CFE = 1; delay_2(232); //>2.5ms //psw=0 standard write if (x == write_command0)//寫密碼:初始化密碼 { uchar i; uchar data *data p; p = cominceptbuff; p_U2270B_CFE = 0; delay_2(31);//start gap>330us write_bit(1);//寫操作碼1:10 write_bit(0);//寫操作碼0 write_bit(0);//寫鎖定位0 for(i = 0;i < 35;i++) { write_bit(1);//寫數據位1 } p_U2270B_CFE = 1; led_light1 = 0; led_light = 1; delay_2(40000);//測試使用 //write_block(cominceptbuff[4],p); p_U2270B_CFE = 1; bankdata[20] = cominceptbuff[0];//密碼存入 bankdata[21] = cominceptbuff[1]; bankdata[22] = cominceptbuff[2]; bankdata[23] = cominceptbuff[3]; } else if (x == write_command1)//配置卡參數:初始化 { uchar data *data p; p = cominceptbuff; write_bit(1);//寫操作碼1:10 write_bit(0);//寫操作碼0 write_bit(0);//寫鎖定位0 write_block(cominceptbuff[4],p); p_U2270B_CFE= 1; } //psw=1 pssword mode else if(x == write_command2) //密碼寫數據 { uchar data*data p; p = &bankdata[24]; write_bit(1);//寫操作碼1:10 write_bit(0);//寫操作碼0 write_password(p);//發口令 write_bit(0);//寫鎖定位0 p = cominceptbuff; write_block(cominceptbuff[4],p);//寫數據 } else if(x == write_command3)//aor //喚醒 { //cominceptbuff[1]操作碼10 X xxxxxB uchar data *data p; p = cominceptbuff; write_bit(1);//10 write_bit(0); write_password(p);//密碼 p_U2270B_CFE = 1;//此時數據不停的循環傳出 } else //停止操作碼 { write_bit(1);//11 write_bit(1); p_U2270B_CFE = 1; } p_U2270B_CFE = 1; delay_2(560);//5.6ms } /************************************/ void f_clearpassword()//清除密碼 { uchar data *data p; uchar i,x; p = &bankdata[24];//原密碼 p_U2270B_CFE = 0; delay_2(18);//start gap>150us //操作碼10:10xxxxxxB write_bit(1); write_bit(0); for(x = 0;x < 4;x++)//發原密碼 { DATA = *(p++); for(i = 0;i < 8;i++) { write_bit(BIT0); DATA >>= 1; } } write_bit(0);//鎖定位0:0 p = &cominceptbuff[0]; write_block(0x00,p);//寫新配置參數:pwd=0 //密碼無效:即清除密碼 DATA = 0x00;//停止操作碼00000000B for(i = 0;i < 2;i++) { write_bit(BIT7); DATA <<= 1; } p_U2270B_CFE = 1; delay_2(560);//5.6ms } /*********************************/ void f_changepassword()//修改密碼 { uchar data *data p; uchar i,x,addr; addr = 0x07;//block7 p = &Nkey_a[0];//原密碼 DATA = 0x80;//操作碼10:10xxxxxxB for(i = 0;i < 2;i++) { write_bit(BIT7); DATA <<= 1; } for(x = 0;x < 4;x++)//發原密碼 { DATA = *(p++); for(i = 0;i < 8;i++) { write_bit(BIT7); DATA >>= 1; } } write_bit(0);//鎖定位0:0 p = &cominceptbuff[0]; write_block(0x07,p);//寫新密碼 p_U2270B_CFE = 1; bankdata[24] = cominceptbuff[0];//密碼存入 bankdata[25] = cominceptbuff[1]; bankdata[26] = cominceptbuff[2]; bankdata[27] = cominceptbuff[3]; DATA = 0x00;//停止操作碼00000000B for(i = 0;i < 2;i++) { write_bit(BIT7); DATA <<= 1; } p_U2270B_CFE = 1; delay_2(560);//5.6ms } /***************************子函數***********************************/ void write_bit(bit x)//寫一位 { if(x) { p_U2270B_CFE = 1; delay_2(32);//448*11.0592/120=42延時448us p_U2270B_CFE = 0; delay_2(28);//280*11.0592/120=26寫1 } else { p_U2270B_CFE = 1; delay_2(92);//192*11.0592/120=18 p_U2270B_CFE = 0; delay_2(28);//280*11.0592/120=26寫0 } } /*******************寫一個block*******************/ void write_block(uchar addr,uchar data *data p) { uchar i,j; for(i = 0;i < 4;i++)//block0數據 { DATA = *(p++); for(j = 0;j < 8;j++) { write_bit(BIT0); DATA >>= 1; } } DATA = addr <<= 5;//0地址 for(i = 0;i < 3;i++) { write_bit(BIT7); DATA <<= 1; } } /*************************************************/ void write_password(uchar data *data p) { uchar i,j; for(i = 0;i < 4;i++)// { DATA = *(p++); for(j = 0;j < 8;j++) { write_bit(BIT0); DATA >>= 1; } } } /*************************************************/ void main() { initial(); TI = RI = 0; ES = 1; EA = 1; delay_2(28); //f_readcard(); while(1) { f_readcard(); //讀卡 f_writecard(command1); //寫卡 f_clearpassword(); //清除密碼 f_changepassword(); //修改密碼 } }
標簽： 12345
上傳時間： 2017-10-20
上傳用戶：my_lcs
題目：古典問題：有一對兔子，從出生后第3個月起每個月都生一對兔子，小兔子長到第三個月后每個月又生一對兔子，假如兔子都不死，問每個月的兔子總數為多少？ //這是一個菲波拉契數列問題 public class lianxi01 { public static void main(String[] args) { System.out.println("第1個月的兔子對數: 1"); System.out.println("第2個月的兔子對數: 1"); int f1 = 1, f2 = 1, f, M=24; for(int i=3; i<=M; i++) { f = f2; f2 = f1 + f2; f1 = f; System.out.println("第" + i +"個月的兔子對數: "+f2); } } } 【程序2】 題目：判斷101-200之間有多少個素數，并輸出所有素數。 程序分析：判斷素數的方法：用一個數分別去除2到sqrt(這個數)，如果能被整除， 則表明此數不是素數，反之是素數。 public class lianxi02 { public static void main(String[] args) { int count = 0; for(int i=101; i<200; i+=2) { boolean b = false; for(int j=2; j<=Math.sqrt(i); j++) { if(i % j == 0) { b = false; break; } else { b = true; } } if(b == true) {count ++;System.out.println(i );} } System.out.println( "素數個數是: " + count); } } 【程序3】 題目：打印出所有的 "水仙花數 "，所謂 "水仙花數 "是指一個三位數，其各位數字立方和等于該數本身。例如：153是一個 "水仙花數 "，因為153=1的三次方＋5的三次方＋3的三次方。 public class lianxi03 { public static void main(String[] args) { int b1, b2, b3;
上傳時間： 2017-12-24
上傳用戶：Ariza
The 4.0 kbit/s speech codec described in this paper is based on a Frequency Domain Interpolative (FDI) coding technique, which belongs to the class of prototype waveform Interpolation (PWI) coding techniques. The codec also has an integrated voice activity detector (VAD) and a noise reduction capability. The input signal is subjected to LPC analysis and the prediction residual is separated into a slowly evolving waveform (SEW) and a rapidly evolving waveform (REW) components. The SEW magnitude component is quantized using a hierarchical predictive vector quantization approach. The REW magnitude is quantized using a gain and a sub-band based shape. SEW and REW phases are derived at the decoder using a phase model, based on a transmitted measure of voice periodicity. The spectral (LSP) parameters are quantized using a combination of scalar and vector quantizers. The 4.0 kbits/s coder has an algorithmic delay of 60 ms and an estimated floating point complexity of 21.5 MIPS. The performance of this coder has been evaluated using in-house MOS tests under various conditions such as background noise. channel errors, self-tandem. and DTX mode of operation, and has been shown to be statistically equivalent to ITU-T (3.729 8 kbps codec across all conditions tested.
標簽： frequency-domain interpolation performance Design kbit_s speech coder based and of
上傳時間： 2018-04-08
上傳用戶：kilohorse
#include<stdio.h> #include<windows.h> int xuanxiang; int studentcount; int banjihao[100]; int xueqihao[100][10]; char xm[100][100]; int xuehao[100][10]; int score[100][3]; int yuwen; int shuxue[000]; int yingyu[100]; int c[100]; int p; char x[1000][100]="",y[100][100]="";/*x學院 y專業 z班級*/ int z[100]; main() { void input(); void inputsc(); void alter(); void scbybannji(); printf("--------學生成績管理-----\n"); printf("請按相應數字鍵來實現相應功能\n"); printf("1.錄入學生信息 2.錄入學生成績 3.修改學生成績\n"); printf("4.查詢學生成績 5.不及格科目及名單 6.按班級輸出學生成績單\n"); printf("請輸入你要實現的功能所對應的數字:"); scanf("%d",&xuanxiang); system("cls"); getchar(); switch (xuanxiang) { case 1:input(); case 2:inputsc(); case 3:alter(); /*case 4:select score(); case 5:bujigekemujimingdan();*/ case 6:scbybanji; } } void input() { int i; printf("請輸入你的學院名稱:"); gets(x); printf("請輸入你的專業名稱:"); gets(y); printf("請輸入你的班級號:"); scanf("%d",&z); printf("請輸入你們一個班有幾個人:"); scanf("%d",&p); system("cls"); for(i=0;i<p;i++) { printf("請輸入第%d個學生的學號:",i+1); scanf("%d",xuehao[i]); getchar(); printf("請輸入第%d個學生的姓名:",i+1); gets(xm[i]); system("cls"); } printf("您已經錄入完畢您的班級所有學生的信息!\n"); printf("您的班級為%s%s%s\n",x,y,z); /*alter(p);*/ } void inputsc() { int i; for(i=0;i<p;i++) { printf("\n"); printf("--------------------------------------------------------------------------------\n\n"); printf("\t\t\t\t錄入學生的成績\n\n\n"); printf("--------------------------------------------------------------------------------\n\n"); printf("\t\t\t\t%s\n",xm[i]); printf("\n"); printf("\t\t\t\t數學:"); scanf("%d",&shuxue[i]); printf("\n"); getchar(); printf("\t\t\t\t英語:"); scanf("%d",&yingyu[i]); printf("\n"); getchar(); printf("\t\t\t\tc語言:"); scanf("%d",&c[i]); system("cls"); } } void alter() { int i;/*循環變量*/ int m[10000];/*要查詢的學號*/ int b;/*修改后的成績*/ char kemu[20]=""; printf("請輸入你要修改的學生的學號"); scanf("%d",&m); for (i=0;i<p;i++) { if (m==xuehao[i]) { printf("%s的數學成績?yōu)?d,英語成績?yōu)?d,c語言成績?yōu)?d,xm[i],shuxue[i],yingyu[i],c[i]"); printf("請輸入你想修改的科目");} } gets(kemu); getchar(); if (kemu=="數學"); { scanf("%d",&b); shuxue[i]=b;} if (kemu=="英語"); { scanf("%d",&b); yingyu[i]=b;} if (kemu=="c語言"); { scanf("%d",&b); c[i]=b; } printf("%s的數學成績?yōu)?d,英語成績?yōu)?d,c語言成績?yōu)?d,xm[i],shuxue[i],yingyu[i],c[i]"); } void scbybannji() { int i; char zyname[20]; int bjnumber; printf("請輸入你的專業名稱"); scanf("%s",&zyname); printf("請輸入你的班級號"); scanf("%d",&bjnumber); for (i=0;i<p;i++) { if (zyname==y[i]); if (bjnumber==z[i]); printf("專業名稱%s班級號%d數學成績%d英語成績%dc語言成績%d，y[i],z[i],shuxue[i],yingyu[i],c[i]"); } }
標簽： c語言
上傳時間： 2018-06-08
上傳用戶：2369043090
歐母龍PLC例程PLC控制器源碼255個合集:1600T俄羅斯壓力機.rar200噸壓機程序 omron 的機子C系列的.rar3MK136舊磨床現程序.rar3電機延時控制啟停.rar5V編碼器信號如何接入CP1H高數計數案例.rar6路搶答器源碼.rar902002 OMRON.rarASCII Generic Protocol Macro Object Code.zipASCII Generic Protocol Macro.zipC3電樞異物吸引.rarCalendar Calculation.zipcarbon.rarCompact Flash Memory Write.zipCounter Multiplex.zipcp1h 高速計數觸發中斷注意點.rarcp1h-x40用在非標飲料線上的程序,有注解.rarCP1H與愛默生溫控模塊的通訊程序.rarCP1L and CP1H EasyModbus FB.zipCPM1A編寫的贊揚15T立式注塑機.rarCPM2A Interupt High Speed Counting Sample.zipCPM2A自身時鐘六個時間段觸發程序.rarCQM1 Host Link Master.zipCQM1H 21的例子程序，有溫度壓力等PID控制。.rarCQMaster.swp.zipCS CJ CP NSJ password set.zipCS1 C Mode Hostlink.zipCS1-CJ1 Floating Point to Fixed Point Conversion for HMI.zipcub.rarCX-Programmer Ver.5 Introduction Guide R120-E1-01..zipCX-Programmer Ver.5 Introduction to Function Blocks Guide R121-E1-01.zipC_Mode_Hostlink.zipDeviceNet Explicit Message Example.zipdieban.rarEasy to use Modbus RTU Master for CP1L CP1H CJ1 CJ2 CS1.zipExample of Using Daylight Saving FB's.zipExample Scale Meter Protocol.zipFB Calculate Day Of Week.zipFB Day light savings function block.zipFB Extract Time Date into SecMin Hr Day Mth Yr.zipFB Scale with parameters.zipGKF1250離心機CXP.rargkf1250離心機cxpgkf離心機omron.rarJH21-200程序.rarLED液壓機.rarlogging+ filewrite.ziplpr-des.rarModbus Protocol Macro Object Code.zipModbus Protocol Macro.zipModbus RTU Sample Code CJ1-SCB.rarModbus TCP Client using FB's.zipOmron CS1 Sequencer.zipOMRON E6CP絕對值編碼器使用實例。編碼器為8位格雷碼輸出.rarOmron Modbus Slave Ladder.zipOmron Plc 變頻一帶三例程.rarOMRON PLC編程示范.raromron--MOV傳送指令.raromron-cs1g-h-cpu42日本機的程序.rarOmron_CJ2_to_AB_EIP_Tag_Datalink_Example.rarOMRON接駁臺.rarOMRON控制2伺服.rarOMRON溫度，壓力模擬量輸入程序.rarOMRON照明設備程序.raromron的PLC案例程序.rarOMRON程序舉例.rarOMRON程序舉例2.rarOMRON紙病分析系統-PLC程序(CJ1G).zipomron脈沖輸出到驅動器的程序.rarPCB 沉銅線程序.rarPID溫度控制的PLC程序設計實例.rarPinstamp.zipPLC Clock adjustment with screen.zipPLC錳鋼程序cpm2a.zipPolls and Writes setpoints to E5CK Process Controller - E5CK.swp.zipPRO9連拉.rarProcess states sequence logics.zipQuadrature Input for Standard CPM1A DC Inputs.zipRandom Number Generator.zipScaling in CJ1 CS1 PLC's.zipSMS - GSM PLC Communications.zipsony 公司 某機臺控制程序.rarStepNext.cpt.zipSTUP Example.zipTemplate for Step-Step Next Sequence.zipToggle Button.zipTracking product on conveyor.zipTXD-RXD Quickstart Programs.zipTXD-RXD Serial Port Handling.zipUseable timer.zipV600-E5CK.zipV700-V720 RFID Protocol Macro.zipVB與OMRON PLC通訊源碼.rarWoodwood Controler Example Protocol Program.zipYH32-315油壓機程序.rar一個CJ1M的程序.rar一個OMRON程序,帶位置控制模塊.rar一個生產線上潤滑控制的小程序.rar一些簡單的cpm1a程序.rar一控三恒壓供水程序.rar三層提升機歐姆龍CQM1H程序.rar三菱400噸和200號沖床程序.rar上海產自動模切機飛達部程序.zip上海獅印全自動啤機程序.rar東芝壓鑄機梯形圖.rar兩步法吹瓶機.rar鄉林剪臺.rar買書的隨書樣例.rar井研磨邊機.rar交通燈注釋全.rar今機立式注塑機程序.rar伺服電機正反轉控制.rar位置控制（旋轉編碼器與PLC）.rar充磁機程序.rar先啟后?！『髥⑾韧！∈吕?rar沖床程序.rar分揀線主機一個CJ1M的分揀線程序下掛CP1H.rar利慧利樂灌裝機程序.rar刮水器停止位置檢查程序.rar力泰翻胚機程序.rar北人04印刷機程序.rar北人LQD10騎馬裝訂程序.rar半自動吹瓶機的程.rar南京印刷機.zip卡板程式.rar壓制機程序（帶解釋，注釋）.rar壓力機控制程序.rar原創液壓機程序帶注釋歐姆龍PLC加信捷文本.rar原點搜索程序.rar雙翻分揀機.rar雙邊機.rar反滲透整套PLC控制.rar臺灣產染色機歐姆龍PLC帶3只IO擴展控制程序.rar臺灣大拉無板.rar啤酒廠酒瓶美容機.rar四川綿陽建豐熱磨工段.rar在用設備程序.rar垂直涂布.rar外端子設計數值.rar大型熱電廠 PLC程序(帶注解).rar大搖動超聲波清洗機.rar大連75密練注釋程序.rar安呼12級.rar富佳扶梯程序.rar對齊度編程??！.rar小車控制程序.rar小車送料”例程.rar廣東鍛壓氣壓沖床程序（80T）有詳細注解.rar廣告牌燈箱.rar微電機刷簧自動組裝程序.rar微粉磚自動送料帶OMRON CQM2A+擴展程序帶注釋.rar意大利進口皮革壓花.rar扎鋼機程序.rar打包機.rar拔蓋機.rar撥碼控制.rar擋磚磨邊機（新1）.rar捷豹空壓機控制程序.rar接木機.rar控制程序例子.rar推掛.rar攻絲機2（新）.rar料位顯示.rar旋轉門控制程序1.rar無協議.rar無心磨床(OMRON系統,帶機械手有詳細注解).rar無線膠裝機歐姆龍程序.zip日本人編的程序 拋光研磨.rar日本成型磨床控制程序（附注釋）歐姆龍CPM1A.rar板坯定厚.rar樣例，有注釋.rar模擬量試驗.rar歐姆龍CJ1M鉻化機程序帶注釋.rar歐姆龍CP1H例程.rar歐姆龍CPM1A的PLC.rar歐姆龍CPM2AH PLC和歐姆龍NTZ觸摸屏編寫的超聲波清洗機程序..rar歐姆龍CPM2AH Host Link通訊程序(發布源碼).rar
上傳時間： 2021-10-22
上傳用戶：
|- 數據科學速查表 - 0 B|- 遷移學習實戰 - 0 B|- 零起點Python機器學習快速入門 - 0 B|- 《深度學習入門：基于Python的理論與實現》高清中文版PDF+源代碼 - 0 B|- 《Python生物信息學數據管理》中文版PDF+英文版PDF+源代碼 - 0 B|- 《Python深度學習》2018中文版pdf+英文版pdf+源代碼 - 0 B|- 《Python編程：從入門到實踐》中文版+源代碼 - 0 B|- stanford machine learning - 0 B|- Python語言程序設計2018版電子教案 - 0 B|- Python網絡編程第三版 （原版+中文版+源代碼） - 0 B|- Python機器學習實踐指南（中文版帶書簽）、原書代碼、數據集 - 0 B|- python官方文檔 - 0 B|- Python編程(第4版 套裝上下冊) - 0 B|- PyQt5快速開發與實戰（pdf+源碼） - 0 B|- linux - 0 B|- 征服PYTHON-語言基礎與典型應用.pdf - 67.40 MB|- 與孩子一起學編程_中文版_詳細書簽.pdf - 69.10 MB|- 用Python做科學計算.pdf - 6.10 MB|- 用Python寫網絡爬蟲.pdf - 9.90 MB|- 用Python進行自然語言處理(中文翻譯NLTK).pdf - 4.40 MB|- 像計算機科學家那樣思考 Python中文版第二版.pdf - 712.00 kB|- 網絡爬蟲－Python和數據分析.pdf - 6.90 MB|- 圖解機器學習.pdf - 59.40 MB|- 凸優化.pdf - 5.70 MB|- 數據挖掘導論.pdf - 2.50 MB|- 數據科學入門.pdf - 13.30 MB|- 數據結構與算法__Python語言描述_裘宗燕編著_北京：機械工業出版社_，_2016.01_P346.pdf - 74.30 MB|- 神經網絡與深度學習.pdf - 92.60 MB|- 深入Python3...
標簽： python
上傳時間： 2022-06-06
上傳用戶：
