便攜式B型超聲診斷儀具有無創傷、簡便易行、相對價廉等優勢，在臨床中越來越得到廣泛的應用。它將超聲波技術、微電子技術、計算機技術、機械設計與制造及生物醫學工程等技術融合在一起。開展該課題的研究對提高臨床診斷能力和促進我國醫療事業的發展具有重要的意義。 便攜式B型超聲診斷儀由人機交互系統、探頭、成像系統、顯示系統構成。其基本工作過程是：首先人機交互系統接收到用戶通過鍵盤或鼠標發出的命令，然后成像系統根據命令控制探頭發射超聲波，并對回波信號處理、合成圖像，最后通過顯示系統完成圖像的顯示。 成像系統作為便攜式B型超聲診斷儀的核心對圖像質量有決定性影響，但以前研制的便攜式B型超聲診斷儀的成像系統在三個方面存在不足：第一、采用的是單片機控制步進電機，控制精度不高，導致成像系統采樣不精確；第二、采用的數字掃描變換算法太粗糙，影響超聲圖像的分辨率；第三、它的CPU多采用的是51系列單片機，測量速度太慢，同時也不便于系統升級和擴展。 針對以上不足，提出了基于FPGA的B型超聲成像系統解決方案，采用Altera公司的EP2C5Q208C8芯片實現了步進電機步距角的細分，使電機旋轉更勻速，提高了采樣精度；提出并采用DSTI-ULA算法（Uniform Ladder Algorithm based on Double Sample and Trilinear Interotation）在FPGA內實現數字掃描變換，提高了圖像分辨率；人機交互系統采用S3C2410-AL作為CPU，改善了測量速度和系統的擴展性。 通過對系統硬件電路的設計、制作，軟件的編寫、調試，結果表明，本文所設計的便攜式B型超聲成像系統圖像分辨率高、測量速度快、體積小、操作方便。本文所設計的便攜式B型超聲診斷儀可在野外作業和搶險（諸如地震、抗洪）中發揮作用，同時也可在鄉村診所中完成對相關疾病的診斷工作。
About:
hamsterdb is a database engine written in ANSI C. It supports a B+Tree index structure, uses memory mapped I/O (if available), supports cursors, and can create in-memory databases.
Release focus: Major feature enhancements
Changes:
This release comes with many changes and new features. It can manage multiple databases in one file. A new flag (HAM_LOCK_EXCLUSIVE) places an exclusive lock on the file. hamsterdb was ported to Windows CE, and the Solution file for Visual Studio 2005 now supports builds for x64. Several minor bugs were fixed, performance was improved, and small API changes occurred. Pre-built libraries for Windows (32-bit and 64-bit) are available for download.
Author:
cruppstahl
The Original USB 2.0 specification released on April 27, 2000
Errata to the USB 2.0 specification as of December 7, 2000
Mini-B connector Engineering Change Notice to the USB 2.0 specification.
Pull-up/pull-down Resistors Engineering Change Notice to the USB 2.0 specification.
Errata to the USB 2.0 specification as of May 28, 2002
Interface Association Descriptor Engineering Change Notice to the USB 2.0 specification.
Rounded Chamfer Engineering Change Notice to the USB 2.0 specification as of October 8, 2003
Unicode Engineering Change Notice to the USB 2.0 specification as of February 21, 2005
Inter-Chip USB Supplement Revision 1.0 as of March 13, 2006
Revision 1.3 of the USB On-The-Go Supplement as of December 5, 2006
Revision 1.01 of the Micro-USB Cables and Connectors Specification as of April 4, 2007
USB 2.0 Link Power Management Addendum Engineering Change Notice to the USB 2.0 specification as of July 16, 2007.
The P89LPC938 is a single-chip microcontroller, available in low cost packages, based on
a high performance processor architecture that executes instructions in two to four clocks,
six times the rate of standard 80C51 devices. Many system-level functions have been
incorporated into the P89LPC938 in order to reduce component count, board space, and
system cost.
Atheros Communications
AR6001 WLAN Driver for SDIO installation Read Me
March 26,2007
(based on k14 fw1.1)
Windows CE Embedded CE 6.0 driver installation.
1. Unzip the installation file onto your system (called installation directory below)
2. Create an OS design or open an existing OS design in Platform Builder 6.0.
a. The OS must support the SD bus driver and have an SD Host Controller driver (add these from Catalog Items).
b. Run image size should be set to allow greater than 32MB.
3. a. From the Project menu select Add Existing Subproject...
b. select AR6K_DRV.pbxml
c. select open
This should create a subproject within your OS Design project for the AR6K_DRV driver.
4. Build the solution.
溫度華氏轉變攝氏
#include <stdio.h>
#include <stdlib.h>
enum x {A,B,C,D,E}
int main(void)
{
int a=73,b=85,c=66
{
if (a>=90)
printf("a=A等級!!\n")
else if (a>=80)
printf("73分=B等級!!\n")
else if (a>=70)
printf("73分=C等級!!\n")
else if (a>=60)
printf("73分=D等級!!\n")
else if (a<60)
printf("73分=E等級!!\n")
}
{
if (b>=90)
printf("b=A等級!!\n")
else if (b>=80)
printf("85分=B等級!!\n")
else if (b>=70)
printf("85分=C等級!!\n")
else if (b>=60)
printf("85分=D等級!!\n")
else if (b<60)
printf("85分=E等級!!\n")
}
{
if (c>=90)
printf("c=A等級!!\n")
else if (c>=80)
printf("66分=B等級!!\n")
else if (c>=70)
printf("66分=C等級!!\n")
else if (c>=60)
printf("66分=D等級!!\n")
else if (c<60)
printf("66分=E等級!!\n")
}
system("pause")
return 0
}
溫度華氏轉變攝氏
#include <stdio.h>
#include <stdlib.h>
enum x {A,B,C,D,E}
int main(void)
{
int a=73,b=85,c=66
{
if (a>=90)
printf("a=A等級!!\n")
else if (a>=80)
printf("73分=B等級!!\n")
else if (a>=70)
printf("73分=C等級!!\n")
else if (a>=60)
printf("73分=D等級!!\n")
else if (a<60)
printf("73分=E等級!!\n")
}
{
if (b>=90)
printf("b=A等級!!\n")
else if (b>=80)
printf("85分=B等級!!\n")
else if (b>=70)
printf("85分=C等級!!\n")
else if (b>=60)
printf("85分=D等級!!\n")
else if (b<60)
printf("85分=E等級!!\n")
}
{
if (c>=90)
printf("c=A等級!!\n")
else if (c>=80)
printf("66分=B等級!!\n")
else if (c>=70)
printf("66分=C等級!!\n")
else if (c>=60)
printf("66分=D等級!!\n")
else if (c<60)
printf("66分=E等級!!\n")
}
system("pause")
return 0
}
