/* ********************************************************************************************************* * uC/TCP-IP V2 * The Embedded TCP/IP Suite * * (c) Copyright 2003-2010; Micrium, Inc.; Weston, FL * * All rights reserved. Protected by international copyright laws. * * uC/TCP-IP is provided in source form to registered licensees ONLY. It is * illegal to distribute this source code to any third party unless you receive * written permission by an authorized Micrium representative. Knowledge of * the source code may NOT be used to develop a similar product. * * Please help us continue to provide the Embedded community with the finest * software available. Your honesty is greatly appreciated. * * You can contact us at www.micrium.com. ********************************************************************************************************* */ /* ********************************************************************************************************* * * NETWORK TCP LAYER * (TRANSMISSION CONTROL PROTOCOL) * * Filename : net_tcp.h * Version : V2.10 * Programmer(s) : ITJ ********************************************************************************************************* * Note(s) : (1) Supports Transmission Control Protocol as described in RFC #793 with the following * restrictions/constraints : * * (a) TCP Security & Precedence NOT supported RFC # 793, Section 3.6 * * (b) TCP Urgent Data NOT supported RFC # 793, Section 3.7 * 'The Communication of * Urgent Information' * * (c) The following TCP options NOT supported : * * (1) Window Scale RFC #1072, Section 2 * RFC #1323, Section 2 * (2) Selective Acknowledgement (SACK) RFC #1072, Section 3 * RFC #2018 * RFC #2883 * (3) TCP Echo RFC #1072, Section 4 * (4) Timestamp RFC #1323, Section 3.2 * (5) Protection Against Wrapped Sequences (PAWS) RFC #1323, Section 4 * * (d) #### IP-Options-to-TCP-Connection RFC #1122, Section 4.2.3.8 * Handling NOT supported * * (e) #### ICMP-Error-Message-to-TCP-Connection RFC #1122, Section 4.2.3.9 * Handling NOT currently supported * * (2) TCP Layer assumes/requires Network Socket Layer (see 'net_sock.h MODULE Note #1a2'). ********************************************************************************************************* */ /*$PAGE*/ /* ********************************************************************************************************* * MODULE * * Note(s) : (1) TCP Layer module is NOT required for UDP-to-Application API configuration. * * See also 'net_cfg.h TRANSPORT LAYER CONFIGURATION' * & 'net_cfg.h USER DATAGRAM PROTOCOL LAYER CONFIGURATION'. * * See also 'net_tcp.h Note #2'. * * (2) The following TCP-module-present configuration value MUST be pre-#define'd in * 'net_cfg_net.h' PRIOR to all other network modules that require TCP Layer * configuration (see 'net_cfg_net.h TCP LAYER CONFIGURATION Note #2b') : * * NET_TCP_MODULE_PRESENT ********************************************************************************************************* */ #ifdef NET_TCP_MODULE_PRESENT /* See Note #2. */ /* ********************************************************************************************************* * EXTERNS ********************************************************************************************************* */ #if ((defined(NET_TCP_MODULE)) && \ (defined(NET_GLOBALS_EXT))) #define NET_TCP_EXT #else #define NET_TCP_EXT extern #endif /*$PAGE*/ /* ********************************************************************************************************* * DEFINES ********************************************************************************************************* */ /* ********************************************************************************************************* * TCP HEADER DEFINES * * Note(s) : (1) The following TCP value MUST be pre-#define'd in 'net_def.h' PRIOR to 'net_buf.h' so that * the Network Buffer Module can configure maximum buffer header size (see 'net_def.h TCP * LAYER DEFINES' & 'net_buf.h NETWORK BUFFER INDEX & SIZE DEFINES Note #1') : * * (a) NET_TCP_HDR_SIZE_MAX 60 (NET_TCP_HDR_LEN_MAX * * NET_TCP_HDR_LEN_WORD_SIZE) * * (2) Urgent pointer & data NOT supported (see 'net_tcp.h Note #1b'). ********************************************************************************************************* */ #define NET_TCP_HDR_LEN_MASK 0xF000u #define NET_TCP_HDR_LEN_SHIFT 12u #define NET_TCP_HDR_LEN_NONE 0u #define NET_TCP_HDR_LEN_MIN 5u #define NET_TCP_HDR_LEN_MAX 15u #define NET_TCP_HDR_LEN_WORD_SIZE CPU_WORD_SIZE_32 #define NET_TCP_HDR_SIZE_MIN (NET_TCP_HDR_LEN_MIN * NET_TCP_HDR_LEN_WORD_SIZE) #if 0 /* See Note #1a. */ #define NET_TCP_HDR_SIZE_MAX (NET_TCP_HDR_LEN_MAX * NET_TCP_HDR_LEN_WORD_SIZE) #endif #define NET_TCP_HDR_SIZE_TOT_MIN (NET_IP_HDR_SIZE_TOT_MIN + NET_TCP_HDR_SIZE_MIN) #define NET_TCP_HDR_SIZE_TOT_MAX (NET_IP_HDR_SIZE_TOT_MAX + NET_TCP_HDR_SIZE_MAX) #define NET_TCP_PSEUDO_HDR_SIZE 12u /* = sizeof(NET_TCP_PSEUDO_HDR) */ #define NET_TCP_PORT_NBR_RESERVED NET_PORT_NBR_RESERVED #define NET_TCP_PORT_NBR_NONE NET_TCP_PORT_NBR_RESERVED #define NET_TCP_HDR_URG_PTR_NONE 0x0000u /* See Note #2. */ /*$PAGE*/ /* ********************************************************************************************************* * TCP HEADER FLAG DEFINES * * Note(s) : (1) See 'TCP HEADER Note #2' for flag fields. * * (2) Urgent pointer & data NOT supported (see 'net_tcp.h Note #1b'). ********************************************************************************************************* */ #define NET_TCP_HDR_FLAG_MASK 0x0FFFu #define NET_TCP_HDR_FLAG_NONE DEF_BIT_NONE #define NET_TCP_HDR_FLAG_RESERVED 0x0FE0u /* MUST be '0'. */ #define NET_TCP_HDR_FLAG_URGENT DEF_BIT_05 /* See Note #2. */ #define NET_TCP_HDR_FLAG_ACK DEF_BIT_04 #define NET_TCP_HDR_FLAG_PUSH DEF_BIT_03 #define NET_TCP_HDR_FLAG_RESET DEF_BIT_02 #define NET_TCP_HDR_FLAG_SYNC DEF_BIT_01 #define NET_TCP_HDR_FLAG_FIN DEF_BIT_00 #define NET_TCP_HDR_FLAG_CLOSE NET_TCP_HDR_FLAG_FIN /* ********************************************************************************************************* * TCP FLAG DEFINES ********************************************************************************************************* */ /* ------------------ NET TCP FLAGS ------------------- */ #define NET_TCP_FLAG_NONE DEF_BIT_NONE #define NET_TCP_FLAG_USED DEF_BIT_00 /* TCP conn cur used; i.e. NOT in free TCP conn pool. */ /* ------------------ TCP TX FLAGS ------------------- */ /* TCP tx flags copied from TCP hdr flags. */ #define NET_TCP_FLAG_TX_FIN NET_TCP_HDR_FLAG_FIN #define NET_TCP_FLAG_TX_CLOSE NET_TCP_FLAG_TX_FIN #define NET_TCP_FLAG_TX_SYNC NET_TCP_HDR_FLAG_SYNC #define NET_TCP_FLAG_TX_RESET NET_TCP_HDR_FLAG_RESET #define NET_TCP_FLAG_TX_PUSH NET_TCP_HDR_FLAG_PUSH #define NET_TCP_FLAG_TX_ACK NET_TCP_HDR_FLAG_ACK #define NET_TCP_FLAG_TX_URGENT NET_TCP_HDR_FLAG_URGENT #define NET_TCP_FLAG_TX_BLOCK DEF_BIT_07 /* ------------------ TCP RX FLAGS ------------------- */ #define NET_TCP_FLAG_RX_DATA_PEEK DEF_BIT_08 #define NET_TCP_FLAG_RX_BLOCK DEF_BIT_15 /*$PAGE*/ /* ********************************************************************************************************* * TCP TYPE DEFINES * * Note(s) : (1) NET_TCP_TYPE_&&& #define values specifically chosen as ASCII representations of the TCP * types. Memory displays of TCP types will display with their chosen ASCII names. ********************************************************************************************************* */ /* ------------------ NET TCP TYPES ------------------- */ #if (CPU_CFG_ENDIAN_TYPE == CPU_ENDIAN_TYPE_BIG) #define NET_TCP_TYPE_NONE 0x4E4F4E45u /* "NONE" in ASCII. */ #define NET_TCP_TYPE_CONN 0x54435020u /* "TCP " in ASCII. */ #else #if (CPU_CFG_DATA_SIZE == CPU_WORD_SIZE_32) #define NET_TCP_TYPE_NONE 0x454E4F4Eu /* "NONE" in ASCII. */ #define NET_TCP_TYPE_CONN 0x20504354u /* "TCP " in ASCII. */ #elif (CPU_CFG_DATA_SIZE == CPU_WORD_SIZE_16) #define NET_TCP_TYPE_NONE 0x4F4E454Eu /* "NONE" in ASCII. */ #define NET_TCP_TYPE_CONN 0x43542050u /* "TCP " in ASCII. */ #else /* Dflt CPU_WORD_SIZE_08. */ #define NET_TCP_TYPE_NONE 0x4E4F4E45u /* "NONE" in ASCII. */ #define NET_TCP_TYPE_CONN 0x54435020u /* "TCP " in ASCII. */ #endif #endif /* ********************************************************************************************************* * TCP SEQUENCE NUMBER DEFINES * * Note(s) : (1) TCP initial transmit sequence number is incremented by a fixed value, preferably a large * prime value or a large value with multiple unique factors. * * (a) One reasonable TCP initial transmit sequence number increment value example : * * 65527 = 37 * 23 * 11 * 7 * * * #### NET_TCP_TX_SEQ_NBR_CTR_INC could be developer-configured in 'net_cfg.h'. * * See also 'NET_TCP_TX_GET_SEQ_NBR() Notes #1b2 & #1c2'. ********************************************************************************************************* */ #define NET_TCP_SEQ_NBR_NONE 0u #define NET_TCP_ACK_NBR_NONE NET_TCP_SEQ_NBR_NONE #define NET_TCP_TX_SEQ_NBR_CTR_INC 65527u /* See Note #1. */ #define NET_TCP_ACK_NBR_DUP_WIN_SIZE_SCALE 4 /*$PAGE*/ /* ********************************************************************************************************* * TCP DATA/TOTAL LENGTH DEFINES * * Note(s) : (1) (a) TCP total length #define's (NET_TCP_TOT_LEN) relate to the total size of a complete * TCP packet, including the packet's TCP header. Note that a complete TCP packet MAY * be fragmented in multiple Internet Protocol packets. * * (b) TCP data length #define's (NET_TCP_DATA_LEN) relate to the data size of a complete * TCP packet, equal to the total TCP packet length minus its TCP header size. Note * that a complete TCP packet MAY be fragmented in multiple Internet Protocol packets. ********************************************************************************************************* */ /* See Notes #1a & #1b. */ #define NET_TCP_DATA_LEN_MIN 0u #define NET_TCP_TOT_LEN_MIN (NET_TCP_HDR_SIZE_MIN + NET_TCP_DATA_LEN_MIN) #define NET_TCP_TOT_LEN_MAX (NET_IP_TOT_LEN_MAX - NET_IP_HDR_SIZE_MIN ) #define NET_TCP_DATA_LEN_MAX (NET_TCP_TOT_LEN_MAX - NET_TCP_HDR_SIZE_MIN) /*$PAGE*/ /* ********************************************************************************************************* * TCP SEGMENT SIZE DEFINES * * Note(s) : (1) (a) RFC # 879, Section 3 states that the TCP Maximum Segment Size "counts only * data octets in the segment, ... not the TCP header or the IP header". * * (b) RFC #1122, Section 4.2.2.6 requires that : * * (1) "The MSS value to be sent in an MSS option must be less than or equal to * * (A) MMS_R - 20 * * where MMS_R is the maximum size for a transport-layer message that can * be received." * * (2) "If an MSS option is not received at connection setup, TCP MUST assume a * default send MSS of 536 (576 - 40)." * * See also 'net_ip.h IP DATA/TOTAL LENGTH DEFINES Note #1'. ********************************************************************************************************* */ /* See Note #1. */ #define NET_TCP_MAX_SEG_SIZE_DFLT (NET_IP_MAX_DATAGRAM_SIZE_DFLT - NET_IP_HDR_SIZE_MIN - NET_TCP_HDR_SIZE_MIN) #define NET_TCP_MAX_SEG_SIZE_DFLT_RX NET_TCP_DATA_LEN_MAX /* See Note #1b1. */ #define NET_TCP_MAX_SEG_SIZE_DFLT_TX NET_TCP_MAX_SEG_SIZE_DFLT /* See Note #1b2. */ #define NET_TCP_MAX_SEG_SIZE_NONE 0u #define NET_TCP_MAX_SEG_SIZE_MIN NET_TCP_MAX_SEG_SIZE_DFLT #define NET_TCP_MAX_SEG_SIZE_MAX NET_TCP_DATA_LEN_MAX #define NET_TCP_SEG_LEN_MIN NET_TCP_DATA_LEN_MIN #define NET_TCP_SEG_LEN_MAX NET_TCP_DATA_LEN_MAX #define NET_TCP_SEG_LEN_SYNC 1u #define NET_TCP_SEG_LEN_FIN 1u #define NET_TCP_SEG_LEN_CLOSE NET_TCP_SEG_LEN_FIN #define NET_TCP_SEG_LEN_ACK 0u #define NET_TCP_SEG_LEN_RESET 0u #define NET_TCP_SEG_LEN_PROBE 0u #define NET_TCP_DATA_LEN_TX_SYNC 0u #define NET_TCP_DATA_LEN_TX_FIN 0u #define NET_TCP_DATA_LEN_TX_CLOSE NET_TCP_DATA_LEN_TX_FIN #define NET_TCP_DATA_LEN_TX_ACK 0u #define NET_TCP_DATA_LEN_TX_PROBE_NO_DATA 0u #define NET_TCP_DATA_LEN_TX_PROBE_DATA 1u #define NET_TCP_DATA_LEN_TX_RESET 0u #define NET_TCP_TX_PROBE_DATA 0x00u /* ********************************************************************************************************* * TCP WINDOW SIZE DEFINES * * Note(s) : (1) Although NO RFC specifies the absolute minimum TCP connection window size value allowed, * RFC #793, Section 3.7 'Data Communication : Managing the Window' states that for "the * window ... there is an assumption that this is related to the currently available data * buffer space available for this connection". ********************************************************************************************************* */ #define NET_TCP_WIN_SIZE_NONE 0u #define NET_TCP_WIN_SIZE_MIN NET_TCP_MAX_SEG_SIZE_MIN #define NET_TCP_WIN_SIZE_MAX DEF_INT_16U_MAX_VAL /*$PAGE*/ /* ********************************************************************************************************* * TCP HEADER OPTIONS DEFINES * * Note(s) : (1) See the following RFC's for TCP options summary : * * (a) RFC # 793, Section 3.1 'Header Format : Options' * (b) RFC #1122; Sections 4.2.2.5, 4.2.2.6 * * (2) TCP option types are encoded in the first octet for each TCP option as follows : * * -------- * | TYPE | * -------- * * The TCP option type value determines the TCP option format : * * (a) The following TCP option types are single-octet TCP options -- i.e. the option type * octet is the ONLY octet for the TCP option. * * (1) TYPE = 0 End of Options List * (2) TYPE = 1 No Operation * * * (b) All other TCP options MUST be multi-octet TCP options (see RFC #1122, Section 4.2.2.5) : * * ------------------------------ * | TYPE | LEN | TCP OPT | * ------------------------------ * * where * TYPE Indicates the specific TCP option type * LEN Indicates the total TCP option length, in octets, including * the option type & the option length octets * TCP OPT Additional TCP option octets, if any, that contain the remaining * TCP option information * * The following TCP option types are multi-octet TCP options where the option's second * octet specify the total TCP option length, in octets, including the option type & the * option length octets : * * (1) TYPE = 2 Maximum Segment Size See RFC # 793, Section 3.1 'Header Format : * Options : Maximum Segment Size'; * RFC #1122, Section 4.2.2.6; * RFC # 879, Section 3 * * (2) TYPE = 3 Window Scale See 'net_tcp.h Note #1c1' * (3) TYPE = 4 SACK Allowed See 'net_tcp.h Note #1c2' * (4) TYPE = 5 SACK Option See 'net_tcp.h Note #1c2' * (5) TYPE = 6 Echo Request See 'net_tcp.h Note #1c3' * (6) TYPE = 7 Echo Reply See 'net_tcp.h Note #1c3' * (7) TYPE = 8 Timestamp See 'net_tcp.h Note #1c4' * * (3) TCP header allows for a maximum option list length of 40 octets : * * NET_TCP_HDR_OPT_SIZE_MAX = NET_TCP_HDR_SIZE_MAX - NET_TCP_HDR_SIZE_MIN * * = 60 - 20 * * = 40 * * (4) 'NET_TCP_OPT_SIZE' MUST be pre-defined PRIOR to all definitions that require TCP option * size data type. ********************************************************************************************************* */ /*$PAGE*/ #define NET_TCP_HDR_OPT_END_LIST 0u #define NET_TCP_HDR_OPT_NOP 1u #define NET_TCP_HDR_OPT_MAX_SEG_SIZE 2u #define NET_TCP_HDR_OPT_WIN_SCALE 3u #define NET_TCP_HDR_OPT_SACK_PERMIT 4u #define NET_TCP_HDR_OPT_SACK 5u #define NET_TCP_HDR_OPT_ECHO_REQ 6u #define NET_TCP_HDR_OPT_ECHO_REPLY 7u #define NET_TCP_HDR_OPT_TS 8u #define NET_TCP_HDR_OPT_PAD NET_TCP_HDR_OPT_END_LIST #define NET_TCP_HDR_OPT_LEN_END_LIST 1u #define NET_TCP_HDR_OPT_LEN_NOP 1u #define NET_TCP_HDR_OPT_LEN_MAX_SEG_SIZE 4u #define NET_TCP_HDR_OPT_LEN_WIN_SCALE 3u #define NET_TCP_HDR_OPT_LEN_SACK_PERMIT 2u #define NET_TCP_HDR_OPT_LEN_ECHO_REQ 6u #define NET_TCP_HDR_OPT_LEN_ECHO_REPLY 6u #define NET_TCP_HDR_OPT_LEN_TS 10u #define NET_TCP_HDR_OPT_LEN_SACK_MIN 6u #define NET_TCP_HDR_OPT_LEN_SACK_MAX 38u #define NET_TCP_HDR_OPT_LEN_MIN 1u #define NET_TCP_HDR_OPT_LEN_MIN_LEN 2u #define NET_TCP_HDR_OPT_LEN_MAX 38u typedef CPU_INT32U NET_TCP_OPT_SIZE; /* TCP opt size data type (see Note #4). */ #define NET_TCP_HDR_OPT_SIZE_WORD (sizeof(NET_TCP_OPT_SIZE)) #define NET_TCP_HDR_OPT_SIZE_MAX (NET_TCP_HDR_SIZE_MAX - NET_TCP_HDR_SIZE_MIN) #define NET_TCP_HDR_OPT_NBR_MIN 0u #define NET_TCP_HDR_OPT_NBR_MAX (NET_TCP_HDR_OPT_SIZE_MAX / NET_TCP_HDR_OPT_SIZE_WORD) #define NET_TCP_HDR_OPT_IX NET_TCP_HDR_SIZE_MIN /*$PAGE*/ /* ********************************************************************************************************* * TCP OPTION CONFIGURATION TYPE DEFINES * * Note(s) : (1) NET_TCP_OPT_CFG_TYPE_&&& #define values specifically chosen as ASCII representations of * the TCP option configuration types. Memory displays of TCP option configuration buffers * will display the TCP option configuration TYPEs with their chosen ASCII names. ********************************************************************************************************* */ /* ---------------- TCP OPT CFG TYPES ----------------- */ #if (CPU_CFG_ENDIAN_TYPE == CPU_ENDIAN_TYPE_BIG) #define NET_TCP_OPT_CFG_TYPE_NONE 0x4E4F4E45u /* "NONE" in ASCII. */ #define NET_TCP_OPT_CFG_TYPE_MAX_SEG_SIZE 0x4D535320u /* "MSS " in ASCII. */ #define NET_TCP_OPT_CFG_TYPE_WIN_SCALE 0x57494E20u /* "WIN " in ASCII (see 'net_tcp.h Note #1c1'). */ #define NET_TCP_OPT_CFG_TYPE_SACK_PERMIT 0x53434B50u /* "SCKP" in ASCII (see 'net_tcp.h Note #1c2'). */ #define NET_TCP_OPT_CFG_TYPE_SACK 0x5341434Bu /* "SACK" in ASCII (see 'net_tcp.h Note #1c2'). */ #define NET_TCP_OPT_CFG_TYPE_ECHO_REQ 0x45524551u /* "EREQ" in ASCII (see 'net_tcp.h Note #1c3'). */ #define NET_TCP_OPT_CFG_TYPE_ECHO_REPLY 0x4543484Fu /* "ECHO" in ASCII (see 'net_tcp.h Note #1c3'). */ #define NET_TCP_OPT_CFG_TYPE_TS 0x54532020u /* "TS " in ASCII (see 'net_tcp.h Note #1c4'). */ #else #if (CPU_CFG_DATA_SIZE == CPU_WORD_SIZE_32) #define NET_TCP_OPT_CFG_TYPE_NONE 0x454E4F4Eu /* "NONE" in ASCII. */ #define NET_TCP_OPT_CFG_TYPE_MAX_SEG_SIZE 0x2053534Du /* "MSS " in ASCII. */ #define NET_TCP_OPT_CFG_TYPE_WIN_SCALE 0x204E4957u /* "WIN " in ASCII (see 'net_tcp.h Note #1c1'). */ #define NET_TCP_OPT_CFG_TYPE_SACK_PERMIT 0x504B4353u /* "SCKP" in ASCII (see 'net_tcp.h Note #1c2'). */ #define NET_TCP_OPT_CFG_TYPE_SACK 0x4B434153u /* "SACK" in ASCII (see 'net_tcp.h Note #1c2'). */ #define NET_TCP_OPT_CFG_TYPE_ECHO_REQ 0x51455245u /* "EREQ" in ASCII (see 'net_tcp.h Note #1c3'). */ #define NET_TCP_OPT_CFG_TYPE_ECHO_REPLY 0x4F484345u /* "ECHO" in ASCII (see 'net_tcp.h Note #1c3'). */ #define NET_TCP_OPT_CFG_TYPE_TS 0x20205354u /* "TS " in ASCII (see 'net_tcp.h Note #1c4'). */ #elif (CPU_CFG_DATA_SIZE == CPU_WORD_SIZE_16) #define NET_TCP_OPT_CFG_TYPE_NONE 0x4F4E454Eu /* "NONE" in ASCII. */ #define NET_TCP_OPT_CFG_TYPE_MAX_SEG_SIZE 0x534D2053u /* "MSS " in ASCII. */ #define NET_TCP_OPT_CFG_TYPE_WIN_SCALE 0x4957204Eu /* "WIN " in ASCII (see 'net_tcp.h Note #1c1'). */ #define NET_TCP_OPT_CFG_TYPE_SACK_PERMIT 0x4353504Bu /* "SCKP" in ASCII (see 'net_tcp.h Note #1c2'). */ #define NET_TCP_OPT_CFG_TYPE_SACK 0x41534B43u /* "SACK" in ASCII (see 'net_tcp.h Note #1c2'). */ #define NET_TCP_OPT_CFG_TYPE_ECHO_REQ 0x52455145u /* "EREQ" in ASCII (see 'net_tcp.h Note #1c3'). */ #define NET_TCP_OPT_CFG_TYPE_ECHO_REPLY 0x43454F48u /* "ECHO" in ASCII (see 'net_tcp.h Note #1c3'). */ #define NET_TCP_OPT_CFG_TYPE_TS 0x53542020u /* "TS " in ASCII (see 'net_tcp.h Note #1c4'). */ #else /* Dflt CPU_WORD_SIZE_08. */ #define NET_TCP_OPT_CFG_TYPE_NONE 0x4E4F4E45u /* "NONE" in ASCII. */ #define NET_TCP_OPT_CFG_TYPE_MAX_SEG_SIZE 0x4D535320u /* "MSS " in ASCII. */ #define NET_TCP_OPT_CFG_TYPE_WIN_SCALE 0x57494E20u /* "WIN " in ASCII (see 'net_tcp.h Note #1c1'). */ #define NET_TCP_OPT_CFG_TYPE_SACK_PERMIT 0x53434B50u /* "SCKP" in ASCII (see 'net_tcp.h Note #1c2'). */ #define NET_TCP_OPT_CFG_TYPE_SACK 0x5341434Bu /* "SACK" in ASCII (see 'net_tcp.h Note #1c2'). */ #define NET_TCP_OPT_CFG_TYPE_ECHO_REQ 0x45524551u /* "EREQ" in ASCII (see 'net_tcp.h Note #1c3'). */ #define NET_TCP_OPT_CFG_TYPE_ECHO_REPLY 0x4543484Fu /* "ECHO" in ASCII (see 'net_tcp.h Note #1c3'). */ #define NET_TCP_OPT_CFG_TYPE_TS 0x54532020u /* "TS " in ASCII (see 'net_tcp.h Note #1c4'). */ #endif #endif /*$PAGE*/ /* ********************************************************************************************************* * TCP CONNECTION TIMEOUT DEFINES * * Note(s) : (1) (a) (1) RFC #1122, Section 4.2.2.13 'DISCUSSION' states that "the graceful close algorithm * of TCP requires that the connection state remain defined on (at least) one end of * the connection, for a timeout period of 2xMSL ... During this period, the (remote * socket, local socket) pair that defines the connection is busy and cannot be reused". * * (2) The following sections reiterate that the TIME-WAIT state timeout scalar is two * maximum segment lifetimes (2 MSL) : * * (A) RFC #793, Section 3.9 'Event Processing : SEGMENT ARRIVES : * Check Sequence Number : TIME-WAIT STATE' * (B) RFC #793, Section 3.9 'Event Processing : SEGMENT ARRIVES : * Check FIN Bit : TIME-WAIT STATE' * * (b) (1) RFC #793, Section 3.3 'Sequence Numbers : Knowing When to Keep Quiet' states that * "the Maximum Segment Lifetime (MSL) is ... to be 2 minutes. This is an engineering * choice, and may be changed if experience indicates it is desirable to do so". * * (2) Microsoft Corporation's Windows XP defaults MSL to 15 seconds. ********************************************************************************************************* */ /* Max seg timeout (see Note #1b) : */ #define NET_TCP_CONN_TIMEOUT_MAX_SEG_MIN_SEC ( 0u ) /* ... min = 0 seconds */ #define NET_TCP_CONN_TIMEOUT_MAX_SEG_MAX_SEC ( 2u * DEF_TIME_NBR_SEC_PER_MIN) /* ... max = 2 minutes */ #define NET_TCP_CONN_TIMEOUT_MAX_SEG_DFLT_SEC ( 15u ) /* ... dflt = 15 seconds */ #define NET_TCP_CONN_TIMEOUT_MAX_SEG_SCALAR 2u /* ... scalar (see Note #1a). */ #define NET_TCP_CONN_TIMEOUT_CONN_DFLT_SEC (120u * DEF_TIME_NBR_SEC_PER_MIN) /* Dflt conn timeout = 120 minutes */ #define NET_TCP_CONN_TIMEOUT_USER_DFLT_SEC ( 30u * DEF_TIME_NBR_SEC_PER_MIN) /* Dflt user timeout = 30 minutes */ /*$PAGE*/ /* ********************************************************************************************************* * TCP CONNECTION STATES * * Note(s) : (1) See the following RFC's for TCP state machine summary : * * (a) RFC # 793; Sections 3.2, 3.4, 3.5, 3.9 * (b) RFC #1122; Sections 4.2.2.8, 4.2.2.10, 4.2.2.11, 4.2.2.13, 4.2.2.18, 4.2.2.20 * * (2) (a) #### Additional closing-data-available state used for closing connections to allow the * application layer to receive any remaining data. * * See also 'net_tcp.c NetTCP_RxPktConnHandlerFinWait1() Note #2f5A2', * 'net_tcp.c NetTCP_RxPktConnHandlerFinWait2() Note #2f5B', * 'net_tcp.c NetTCP_RxPktConnHandlerClosing() Note #2d2B2a1B', * & 'net_tcp.c NetTCP_RxPktConnHandlerLastAck() Note #2d2A1b'. ********************************************************************************************************* */ #define NET_TCP_CONN_STATE_NONE 0u #define NET_TCP_CONN_STATE_FREE 1u #define NET_TCP_CONN_STATE_CLOSED 10u #define NET_TCP_CONN_STATE_LISTEN 20u #define NET_TCP_CONN_STATE_SYNC_RXD 30u #define NET_TCP_CONN_STATE_SYNC_RXD_PASSIVE 31u #define NET_TCP_CONN_STATE_SYNC_RXD_ACTIVE 32u #define NET_TCP_CONN_STATE_SYNC_TXD 35u #define NET_TCP_CONN_STATE_CONN 40u #define NET_TCP_CONN_STATE_FIN_WAIT_1 50u #define NET_TCP_CONN_STATE_FIN_WAIT_2 51u #define NET_TCP_CONN_STATE_CLOSING 52u #define NET_TCP_CONN_STATE_TIME_WAIT 53u #define NET_TCP_CONN_STATE_CLOSE_WAIT 55u #define NET_TCP_CONN_STATE_LAST_ACK 56u #define NET_TCP_CONN_STATE_CLOSING_DATA_AVAIL 59u /* See Note #2a. */ /* ********************************************************************************************************* * TCP CONNECTION QUEUE STATES ********************************************************************************************************* */ #define NET_TCP_RX_Q_STATE_NONE 0u #define NET_TCP_RX_Q_STATE_CLOSED 100u #define NET_TCP_RX_Q_STATE_CLOSING 101u #define NET_TCP_RX_Q_STATE_SYNC 110u #define NET_TCP_RX_Q_STATE_CONN 111u #define NET_TCP_TX_Q_STATE_NONE 0u #define NET_TCP_TX_Q_STATE_CLOSED 200u #define NET_TCP_TX_Q_STATE_CLOSING 201u #define NET_TCP_TX_Q_STATE_SYNC 210u #define NET_TCP_TX_Q_STATE_CONN 211u #define NET_TCP_TX_Q_STATE_SUSPEND 215u #define NET_TCP_TX_Q_STATE_CLOSED_SUSPEND 220u #define NET_TCP_TX_Q_STATE_CLOSING_SUSPEND 221u /*$PAGE*/ /* ********************************************************************************************************* * TCP CONNECTION CODE DEFINES **************
上傳時間： 2015-11-22
上傳用戶：the same kong
Access端口發送數據幀時，總是先剝離幀的Tag，然后再發送。Access端口發往對端設備的以太網幀永遠是不帶標簽的幀
標簽： 端口類型
上傳時間： 2015-12-23
上傳用戶：Icey1996
The TAS3204 is a highly-integrated audio system-on-chip (SOC) consisting of a fully-programmable, 48-bit digital audio processor, a 3:1 stereo analog input MUX, four ADCs, four DACs, and other analog functionality. The TAS3204 is programmable with the graphical PurePath Studio? suite of DSP code development software. PurePath Studio is a highly intuitive, drag-and-drop environment that minimizes software development effort while allowing the end user to utilize the power and flexibility of the TAS3204’s digital audio processing core. TAS3204 processing capability includes speaker equalization and crossover, volume/bass/treble control, signal mixing/MUXing/splitting, delay compensation, dynamic range compression, and many other basic audio functions. Audio functions such as matrix decoding, stereo widening, surround sound virtualization and psychoacoustic bass boost are also available with either third-party or TI royalty-free algorithms. The TAS3204 contains a custom-designed, fully-programmable 135-MHz, 48-bit digital audio processor. A 76-bit accumulator ensures that the high precision necessary for quality digital audio is maintained during arithmetic operations. Four differential 102 dB DNR ADCs and four differential 105 dB DNR DACs ensure that high quality audio is maintained through the whole signal chain as well as increasing robustness against noise sources such as TDMA interference. The TAS3204 is composed of eight functional blocks: Clocking System Digital Audio Interface Analog Audio Interface Power supply Clocks, digital PLL I2C control interface 8051 MCUcontroller Audio DSP – digital audio processing 特性 Digital Audio Processor Fully Programmable With the Graphical, Drag-and-Drop PurePath Studio? Software Development Environment 135-MHz Operation 48-Bit Data Path With 76-Bit Accumulator Hardware Single-Cycle Multiplier (28 × 48)
上傳時間： 2016-05-06
上傳用戶：fagong
Fiddler is a free web debugging tool which logs all HTTP(S) traffic between your computer and the Internet. Inspect traffic, set breakpoints
標簽： 抓包 網絡
上傳時間： 2016-06-03
上傳用戶：ttry
[開源 綠色軟件] [運行環境 Windows XP/7/8/10] [語言 簡體/繁體/English/Unicode] A cool music player. Powered by Bass and BassVis. 極簡本地音樂播放器，透明、純文本界面。支持輕媒體庫、歌詞、可視化。最小化到托盤，占用資源少，適合邊聽音樂邊工作。 應網友要求，加入了Tag編輯、自動切換列表、播放隊列、鼠標手勢、均衡器、音頻設備選擇、全局音量滾輪（托盤區域）、字體設置、極簡模式、鼠標穿透、嵌入桌面、簡單布局等功能。 homepage> mcool.appinn.me ==================================================== 音頻格式APE、FLAC、WavPack、MP3、OGG、TTA、TAK、Musepack、AAC、AC3、WMA、Wav、CD、ALAC、Aiff、MOD、CUE ==================================================== 更新歷史: 3336 -2016.3.25 點睛之筆：任意布局（追上foobar2000）。Arbitrary layout (all in one). 3330 -2016.3.10 一體布局之比例調節（初具foobar2000風貌）。Ratio adjust (all in one). 3308 -2015.11.28 歌詞微調（在選項>常規>鼠標手勢里設置）。Adds function of lyrics tuning. 3306 -2015.11.15 電臺模式（整點時切換歌曲或列表，并非在線音樂），以及多聲卡支持。Adds radio mode, and multi sound card support. 3300 -2015.10.15 完善細節，修復切歌卡住bug。完美版。Fixes some bugs. 3280 -2015.8.1 簡單布局功能。Layout (all in one) function. 3260 -2015.6.1 Win10模式。Win10 mode. 3252 -2015.5.10 任務欄進度條。Taskbar progress display. 3236 -2015.4.10 點睛之筆：透明度調節。Adds function of transparency tuning. 3232 -2015.3.25 自定義軟件名（請在mcool.ini中手動修改）。Adds function of customizing app name. 3230 -2015.3.12 Airplay復刻界面。Airplay interface copy. 3218 -2015.1.20 桌面歌詞。Desktop lyrics. 3216 -2015.1.12 一體化界面（學習Foobar2000和豆瓣FM）。All in one interface. 3212 -2015.1.6 新增Winamp音效插件支持（學習千千靜聽），以及滾輪穿透功能（學習Airplay3）。Adds Winamp DSP plugins support, and adds function of wheel transparent. Winamp音效插件下載：http://uploadgeneration.info/Winamp/www.winamp.com/plugins/dsp-effect/5/top-rated.html 3210 -2014.12.28 重要更新：本地音量調節、自定義鼠標鍵/手勢。Adds local volume control, and adds fuction of customizing mouse control / gesture. 3208 -2014.11.25 簡化右鍵菜單，常規項目移到選項窗口。Simplifies the popup menu, moves the general items to option window. 3206 -2014.11.22 新增文本對齊選項，重新設計導航按鈕。Adds option of text alignment, and redesigns the buttons of playback. 3202 -2014.11.10 新增播放記憶、片段循環（Hotkey: Ctrl+1/2）和貼邊隱藏功能。Adds functions of playback memory, AB repeat and screen side hide. 3200 -2014.11.5 新增無界面選項（先去掉托盤圖標，然后Ctrl+Alt+W隱藏界面，Ctrl+Alt+X關閉）。Adds option of no interface. 3191 -2014.8.26 嵌入桌面。Pins to desktop. 3190 -2014.8.19 音樂管理第一步：列表分組。Playlists grouping. 3186 -2014.8.10 基于列表的分級系統（Hotkey:0..5）。Rating system based on playlist. 3181 -2014.8.1 啟用新圖標（由虹吸墨作者BGLL友情制作）。Uses the new icon. 3180 -2014.7.22 新增Win7任務欄特效。Adds windows 7 taskbar effect. 3166 -2014.6.29 重要更新：自動下載專輯封面（源于歌詞迷）。Downloads album covers from geci.me. 3160 -2014.6.1 重要更新：新增極簡模式，以及OGG/Opus內置封面顯示功能。Adds minimalist mode, and adds function of displaying cover embedded in OGG/Opus. 3152 -2014.5.18 添加托盤右鍵菜單，新增MP4/M4A(ALAC)內置封面顯示功能。Adds systray popup menu, and adds function of displaying cover embedded in MP4/M4A(ALAC). 3151 -2014.5.1 重新設計可視化效果，新增示波器效果。Redesigns visual effects, and adds oscilloscope effect. 3150 -2014.4.20 采用歌詞迷API下載歌詞。Downloads lyrics from geci.me. 3136 -2014.3.30 加入可選的按鈕，以及鼠標穿透功能。Adds function of transparent window. 3132 -2014.3.6 簡化界面，向Foobar2K看齊；增加正在播放面板。Simplifies the interface, and adds now playing panel. 3130 -2014.2.26 重要更新：按照專輯分組。Grouping by album. 3120 -2014.2.18 優化字體渲染（Windows7/8下）。Optimizes font rendering in Windows 7/8. 3110 -2014.1.26 點睛之筆：自定義字體顏色。Adds function of customizing font color. 3108 -2013.11.16 Last.fm同步功能（請到主頁下載插件）。Last.fm scrobbler support. 3106 -2013.11.8 可回溯的隨機播放（學習Airplay 2）。Random playback can be traced back. 3103 -2013.10.12 優化右鍵菜單。Optimizes popup menu. 3102 -2013.9.30 修改滾動條樣式，增加音頻緩沖選項。Modifies style of scroll bar, and adds option of audio buffer length. 3100 -2013.9.10 無邊框設計；迷你模式也可以不置頂（Hotkey:T）。Borderless designs. 3086 -2013.8.20 增加歌詞面板功能。Adds function of lyrics panel. 3082 -2013.8.08 增加在可視化界面顯示歌詞功能。Adds function of displaying lyrics on visual interface. 3080 -2013.8.01 新增設置字體功能，恢復簡單的自動關機功能。Adds function of setting font, and re-adds simple function of auto shutdown. 3060 -2013.6.26 修復在迷你模式停止響應的Bug，去掉自動關機、歌詞調整功能。Fixes bug of stop responding in mini mode, and removes functions of auto shutdown and lyrics trimming. 3050 -2013.5.23 增加手勢功能。Adds gesture function. 3030 -2013.3.10 增加Aero磨砂玻璃效果[如需源碼請聯系我]，XP/Win7/8無差別顯示，按Insert鍵開啟。Adds aero glass effect. 3020 -2013.2.23 增加簡易Tag編輯功能（選中并單擊即可，相當于資源管理器中的重命名，按照[歌手 - 歌名][專輯]格式進行編輯）。Adds function of editing audio tags (select and click, edit with [artist - title][album] format). 3010 -2013.1.23 應網友要求，加入讀取內嵌CUE、歌詞及專輯封面功能。Adds function of reading CUE, LRC and album cover built in media. 3002 -2012.11.03 無按鈕設計；微調進度條尺寸。Buttonless design; modifies the size of the progress bar. 3001 -2012.10.15 重要改進，界面即按鈕：單擊 - 播放/暫停，按住 - 前進。Important update, the interface is a button: Click - Play/Pause, Hold Down - Next. 3000 -2012.9.28 增加Win8模式。Adds Win8 mode option. 2982 -2012.8.26 在Win8下使用微軟雅黑字體。Uses Microsoft YaHei font in Windows 8 CHS. 2981 -2012.8.20 視頻以插件提供（請到主頁下載），增加單曲循環功能。Adds function of repeat track. 2980 -2012.7.26 簡化代碼，去掉視頻和MIDI支持。Removes the video and MIDI support. 2970 -2012.7.20 增加媒體信息顯示功能。Adds function of displaying media info. 2960 -2012.6.28 增加專輯封面顯示功能（Hotkey:Ins）。Adds function of displaying album cover. 2956 -2012.6.01 再次簡化界面。Simplifies the interface again. 2952 -2012.4.28 增加音頻設備選擇功能：DS、ASIO、WASAPI。Adds function of selecting playback device. 2950 -2012.3.30 *增加滾輪調節音量功能（在托盤，中鍵靜音）和媒體鍵支持。Adds function of setting volume by mouse wheel (over systray, middle click to mute), and adds multimedia keys support. 2936 -2012.3.17 微調界面，修復物理刪除失效的BUG。Fine-tunes the interface, and restores the physical delete function. 2930 -2012.2.27 增加TAK格式支持。Adds TAK format support. 2923 -2012.2.12 緊急修復上一版出現的字體模糊BUG（Vista/Win7下），增加在任務欄顯/隱圖標功能（Ctrl+T）。Fixes font vague bug for Vista/Win7, and adds showing/hiding icon on taskbar function. 2920 -2012.2.08 微調界面，優化CPU占用（啟用背景圖片時）。Fine-tunes the interface, and optimizes CPU utilization (while enable background image). 2912 -2012.1.12 增加播放隊列功能。Adds playback queue function. 2910 -2011.12.25 改進迷你模式，增加查找功能。Improves mini mode, and adds find function. *注：此功能對殺毒軟件過敏，開啟方法：按F1進入選項，勾選全局快捷鍵。The feature is allergic to the anti-virus software.
上傳時間： 2016-06-10
上傳用戶：fanghua
This report presents a tutorial of fundamental array processing and beamforming theory relevant to microphone array speech processing. A microphone array consists of multiple microphones placed at different spatial locations. Built upon a knowledge of sound propagation principles, the multiple inputs can be manipulated to enhance or attenuate signals emanating from particular directions. In this way, microphone arrays provide a means of enhancing a desired signal in the presence of corrupting noise sources. Moreover, this enhancement is based purely on knowledge of the source location, and so microphone array techniques are applicable to a wide variety of noise types. Microphone arrays have great potential in practical applications of speech processing, due to their ability to provide both noise robustness and hands-free signal acquisition.
標簽： Microphone array Tutorial Array Signal Processing
上傳時間： 2016-06-12
上傳用戶：halias
32feet.NET is a shared-source project to make personal area networking technologies such as Bluetooth, Infrared (IrDA) and more, easily accessible from .NET code. Supports desktop, mobile or embedded systems. 32feet.NET is free for commercial or non-commercial use. If you use the binaries you can just use the library as-is, if you make modifications to the source you need to include the 32feet.NET License.txt document and ensure the file headers are not modified/removed. The project currently consists of the following libraries:- Bluetooth IrDA Object Exchange Bluetooth support requires a device with either the Microsoft, Widcomm, BlueSoleil, or Stonestreet One Bluetopia Bluetooth stack. Requires .NET Compact Framework v3.5 or above and Windows CE.NET 4.2 or above, or .NET Framework v3.5 for desktop Windows XP, Vista, 7 and 8. A subset of functionality is available for Windows Phone 8 and Windows Embedded Handheld 8 in the InTheHand.Phone.Bluetooth.dll library.
上傳時間： 2016-07-06
上傳用戶：magister2016
樓術描述項: (1).該項目中"我的電腦"是作者自定義的root節點,沒有設定其路徑,所以BeforeExpand事件中會從它開始依次遍歷,但"我的電腦"會提示"沒有指定路徑".故需要if(e.Tag.ToString() != "我的電腦")判斷.同時"我的文檔"需要再次獲取其路徑,依次實現Add子節點; (2).同時在"我的文檔"和盤符中需要添加tNode.Nodes.Add("")加載空節點形成+號,如果沒有該+號,BeforeExpend事件不會被調用,子目錄無法獲取加載,在BeforeExpand事件調用TreeViewItems.Add加載其子結點需要e.Nodes.Clear();清除該結點的子目錄再加載. (3).提供兩篇類似文章供大家學習,經過對比可以發現:第一篇僅從驅動器(C盤)開始加載,所以BeforeExpend簡單展開子目錄即可,不需要判斷"我的電腦"和"我的文檔".第二篇含"桌面",因此需要判斷路徑:"C# TreeView磁盤文件,AfterSelect顯示加號-駱駝祥子" 和"Treeview樹狀顯示文件夾" .同時補充一篇很優秀的文章供大家學習"WinForm應用：ListView做圖像瀏覽" (4).補充TreeView(樹視圖)事件:更詳細見"c# 樹狀視圖(TreeView類)". 事件 描述 AfterCheck 在選中節點復選框后引發 AfterCollapse 在折疊一個節點后引發 AfterExpand 在擴展一個節點后引發 AfterSelect 在選中一個節點后引發 BeforeCheck 在選中節點復選框之前引發 BeforeCollapse 在折疊一個節點之前引發 BeforeExpand 在擴展一個節點之前引發 BeforeSelect 在選中一個節點之前引發 (5).補充兩個關于論壇討論"c#怎樣動態讀取資源文件里的圖片"和"在C＃中怎么調用Resources文件中的圖片" (6).在《C#典型模塊與項目實戰大全》(清華大學出版社-丁士鋒)書中談到,出于對程序響應性能考慮,它先加載盤符結點,沒有使用遞歸一次性加載所有文件到樹狀列表中,代碼通過AfterSelect事件和FileSystemWatcher控件,監聽加載.并使用線程池Task更新加載TreeView,希望大家去學習. 總結 該篇通過TreeView加載了磁盤目錄路徑,并通過ImageList加載圖標.那么怎樣實現閱讀文件夾下文件,獲取其圖標、文件大小、擴展名等信息,并雙擊打開文件呢?下一篇將接著講述.最后希望該文章對大家有所幫助,文章中很多鏈接都可以供覺得有用的同學學習,感謝上面提到的文章及書籍作者.同時如果文章中有錯誤或不足之處請原諒,有問題或建議者亦可提出.希望尊重作者勞動果實勿噴.
上傳時間： 2016-08-15
上傳用戶：baobao9437
BARA SERVER FILE
標簽： TONGFILE SERVER BARAM FREE
上傳時間： 2016-12-11
上傳用戶：wks1222
#include <iostream.h> #include <string.h> #include <iomanip.h> #include "Stud.h" Stud::Stud(){} char *Stud::getno() //獲取學號 { return no; } char *Stud::getname() //獲取姓名 { return name; } char *Stud::getsex() //獲取性別 { return sex; } char *Stud::getminzu() //獲取民族 { return minzu; } char *Stud::getaddress() //獲取出生地 { return address; } char *Stud::getbirth() //獲取出生年月 { return birth; } int Stud::gettag() //獲取姓名 { return tag; } void Stud::changeno(char n[]) //設置學號 { strcpy(no,n); } void Stud::changename(char na[]) //設置姓名 { strcpy(name,na); } void Stud::changesex(char s[]) //設置性別 { strcpy(sex,s); } void Stud::changeminzu(char m[]) //設置民族 { strcpy(minzu,m); } void Stud::changeaddress(char a[]) //設置出生地 { strcpy(address,a); } void Stud::changebirth(char b[]) //設置出生年月 { strcpy(birth,b); } void Stud::addstudent(char *rn,char *rna) //增加學生 { strcpy(no,rn); strcpy(name,rna); } void Stud::addstudent(char *rn,char *rna,char *rs,char *rm,char *ra,char *rb) //增加學生 { tag=0; strcpy(no,rn); strcpy(name,rna); strcpy(sex,rs); strcpy(minzu,rm); strcpy(address,ra); strcpy(birth,rb); } void Stud::delstud() //設置刪除標記 { tag=1; } void Stud::disp() //輸出學生信息 { cout<<setw(15)<<no<<setw(10)<<name<<setw(10)<<sex<<setw(10)<<minzu<<setw(10)<<address<<setw(10)<<birth<<endl; } void Stud::display() //輸出學生信息 { cout<<setw(15)<<no<<setw(10)<<name; }
標簽： 學生
上傳時間： 2016-12-29
上傳用戶：767483511
蟲蟲下載站版權所有 京ICP備2021023401號-1
