-
TLC2543是TI公司的12位串行模數轉換器，使用開關電容逐次逼近技術完成A/D轉換過程。由于是串行輸入結構，能夠節省51系列單片機I/O資源；且價格適中，分辨率較高，因此在儀器儀表中有較為廣泛的應用。
TLC2543的特點
（1）12位分辯率A/D轉換器；
（2）在工作溫度范圍內10μs轉換時間；
（3）11個模擬輸入通道；
（4）3路內置自測試方式；
（5）采樣率為66kbps；
（6）線性誤差±1LSBmax；
（7）有轉換結束輸出EOC；
（8）具有單、雙極性輸出；
（9）可編程的MSB或LSB前導；
（10）可編程輸出數據長度。
TLC2543的引腳排列及說明
TLC2543有兩種封裝形式：DB、DW或N封裝以及FN封裝，這兩種封裝的引腳排列如圖1，引腳說明見表1
TLC2543電路圖和程序欣賞
#include<reg52.h>
#include<intrins.h>
#define uchar unsigned char
#define uint unsigned int
sbit clock=P1^0; sbit d_in=P1^1;
sbit d_out=P1^2;
sbit _cs=P1^3;
uchar a1,b1,c1,d1;
float sum,sum1;
double sum_final1;
double sum_final;
uchar duan[]={0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x07,0x7f,0x6f};
uchar wei[]={0xf7,0xfb,0xfd,0xfe};
void delay(unsigned char b) //50us
{
unsigned char a;
for(;b>0;b--)
for(a=22;a>0;a--);
}
void display(uchar a,uchar b,uchar c,uchar d)
{
P0=duan[a]|0x80;
P2=wei[0];
delay(5);
P2=0xff;
P0=duan[b];
P2=wei[1];
delay(5);
P2=0xff;
P0=duan[c];
P2=wei[2];
delay(5);
P2=0xff;
P0=duan[d];
P2=wei[3];
delay(5);
P2=0xff;
}
uint read(uchar port)
{
uchar i,al=0,ah=0;
unsigned long ad;
clock=0;
_cs=0;
port<<=4;
for(i=0;i<4;i++)
{
d_in=port&0x80;
clock=1;
clock=0;
port<<=1;
}
d_in=0;
for(i=0;i<8;i++)
{
clock=1;
clock=0;
}
_cs=1;
delay(5);
_cs=0;
for(i=0;i<4;i++)
{
clock=1;
ah<<=1;
if(d_out)ah|=0x01;
clock=0;
}
for(i=0;i<8;i++)
{
clock=1;
al<<=1;
if(d_out) al|=0x01;
clock=0;
}
_cs=1;
ad=(uint)ah;
ad<<=8;
ad|=al;
return(ad);
}
void main()
{
uchar j;
sum=0;sum1=0;
sum_final=0;
sum_final1=0;
while(1)
{
for(j=0;j<128;j++)
{
sum1+=read(1);
display(a1,b1,c1,d1);
}
sum=sum1/128;
sum1=0;
sum_final1=(sum/4095)*5;
sum_final=sum_final1*1000;
a1=(int)sum_final/1000;
b1=(int)sum_final%1000/100;
c1=(int)sum_final%1000%100/10;
d1=(int)sum_final%10;
display(a1,b1,c1,d1);
}
}
標簽：
2543
TLC
上傳時間：
2013-11-19
上傳用戶：shen1230
-
#include<iom16v.h>
#include<macros.h>
#define uint unsigned int
#define uchar unsigned char
uint a,b,c,d=0;
void delay(c)
{ for for(a=0;a<c;a++)
for(b=0;b<12;b++);
};
uchar tab[]={
0xc0,0xf9,0xa4,0xb0,0x99,0x92,0x82,0xf8,0x80,0x90,
標簽：
AVR
單片機
數碼管
上傳時間：
2013-10-21
上傳用戶：13788529953
-
以C8051F020為核心處理器，設計無線傳感器網絡數據采集系統。系統采用SZ05-ADV型無線通訊模塊組建Zigbee無線網絡，結合嵌入式系統的軟硬件技術，完成終端節點的8路傳感器信號的數據采集。現場8路信號通過前端處理后，分別送入C8051F020的12位A/D轉換器進行轉換。經過精確處理、存儲后的現場數據，通過Zigbee無線網絡傳送到上位機，系統可達到汽車試驗中無線測試的目的。
Abstract:
This paper designs a wireless sensor network system for data acquisition with C8051F020 as core processors.The system used SZ05-ADV wireless communication module，set up a Zigbee wireless network， combined with hardware and software technologies of embedded systems，completed the end-node 8-locale sensor signal data acquisition.Eight locale signals were sent separately into the 12-bit ADC of C8051F020 for conversion through front treatment.After accurate processing and storage，the locale data was transmitted to the host computer through Zigbee wireless.The system achieves the purpose of wireless testing in vehicle trial.
標簽：
C8051F020
Zigbee
汽車測試
系統設計
上傳時間：
2013-11-23
上傳用戶：dsgkjgkjg
-
The Maxim Integrated 71M6541-DB REV 3.0 Demo Board is a demonstration board for evaluating the 71M6541 device for single-phase electronic energy metering applications in conjunction with the Remote Sensor Inter-face. It incorporates a 71M6541 integrated circuit, a 71M6601 Remote Interface IC, peripheral circuitry such as a serial EEPROM, emulator port, and on-board power supply. A serial to USB converter allows communication to a PC through a USB port. The Demo Board allows the evaluation of the 71M6541 energy meter chip for measurement accuracy and overall system use.
標簽：
71M6541
演示板
用戶手冊
上傳時間：
2013-11-06
上傳用戶：雨出驚人love
-
數字運算，判斷一個數是否接近素數
A Niven number is a number such that the sum of its digits divides itself. For example, 111 is a Niven number because the sum of its digits is 3, which divides 111. We can also specify a number in another base b, and a number in base b is a Niven number if the sum of its digits divides its value.
Given b (2 <= b <= 10) and a number in base b, determine whether it is a Niven number or not.
Input
Each line of input contains the base b, followed by a string of digits representing a positive integer in that base. There are no leading zeroes. The input is terminated by a line consisting of 0 alone.
Output
For each case, print "yes" on a line if the given number is a Niven number, and "no" otherwise.
Sample Input
10 111
2 110
10 123
6 1000
8 2314
0
Sample Output
yes
yes
no
yes
no
標簽：
數字
運算
上傳時間：
2015-05-21
上傳用戶：daguda
-
The government of a small but important country has decided that the alphabet needs to be streamlined and reordered. Uppercase letters will be eliminated. They will issue a royal decree in the form of a String of B and A characters. The first character in the decree specifies whether a must come ( B )Before b in the new alphabet or ( A )After b . The second character determines the relative placement of b and c , etc. So, for example, "BAA" means that a must come Before b , b must come After c , and c must come After d .
Any letters beyond these requirements are to be excluded, so if the decree specifies k comparisons then the new alphabet will contain the first k+1 lowercase letters of the current alphabet.
Create a class Alphabet that contains the method choices that takes the decree as input and returns the number of possible new alphabets that conform to the decree. If more than 1,000,000,000 are possible, return -1.
Definition
標簽：
government
streamline
important
alphabet
上傳時間：
2015-06-09
上傳用戶：weixiao99
-
C＋＋編寫的機器學習算法
Lemga is a C++ package which consists of classes for several learning models and generic algorithms for optimizing (training) the models
標簽：
consists
learning
classes
package
上傳時間：
2014-01-21
上傳用戶：wangchong
-
藍牙跳頻系統的simulink仿真程序（This is a MATLAB simulation (SIMULINK) for the hop selection scheme in Bluetooth. Since nearly the same scheme is used for 79 and 23-hop system. Only the 79-hop system in simulated in the CONNECTION state.）
標簽：
simulation
Bluetooth
selection
simulink
上傳時間：
2013-12-19
上傳用戶：wanqunsheng
-
The XML Toolbox converts MATLAB data types (such as double, char, struct, complex, sparse, logical) of any level of nesting to XML format and vice versa.
For example,
>> project.name = MyProject
>> project.id = 1234
>> project.param.a = 3.1415
>> project.param.b = 42
becomes with str=xml_format(project, off )
"<project>
<name>MyProject</name>
<id>1234</id>
<param>
<a>3.1415</a>
<b>42</b>
</param>
</project>"
On the other hand, if an XML string XStr is given, this can be converted easily to a MATLAB data type or structure V with the command V=xml_parse(XStr).
標簽：
converts
Toolbox
complex
logical
上傳時間：
2016-02-12
上傳用戶：a673761058
-
Abstract—Wireless networks in combination with image
sensors open up a multitude of previously unthinkable sensing
applications. Capable tools and testbeds for these wireless image
sensor networks can greatly accelerate development of complex,
yet efficient algorithms that meet application requirements. In this
paper, we introduce WiSNAP, a Matlab-based application
development platform intended for wireless image sensor
networks. It allows researchers and developers of such networks
to investigate, design, and evaluate algorithms and applications
using real target hardware. WiSNAP offers standardized and
easy-to-use Application Program Interfaces (APIs) to control
image sensors and wireless motes, which do not require detailed
knowledge of the target hardware. Nonetheless, its open system
architecture enables support of virtually any kind of sensor or
wireless mote. Application examples are presented to illustrate the
usage of WiSNAP as a powerful development tool.
標簽：
combination
previously
multitude
Abstract
上傳時間：
2013-12-03
上傳用戶：D&L37
