CAT5110/18/19/23/24/25 linear-taper digitally programmable potentiometers perform the same function as a mechanical potentiometer or a variable resistor. These devices consist of a fixed resistor and a wiper contact with 32-tap points that are digitally controlled through a2-wire up/down serial interface.
The XL6003 regulator is fixed frequency PWM Boost (step-up) DC/DC converter, capable ofdriving 1050mA load current with excellent line and load regulation. The regulator is simple to use because it includes internal frequency compensation and a fixed-frequency oscillator so that it requires a minimum number of external components to work. The XL6003 could directly drive 5~10 3W LED units at VIN=12V.
針對傳統集成電路（ASIC）功能固定、升級困難等缺點，利用FPGA實現了擴頻通信芯片STEL-2000A的核心功能。使用ISE提供的DDS IP核實現NCO模塊，在下變頻模塊調用了硬核乘法器并引入CIC濾波器進行低通濾波，給出了DQPSK解調的原理和實現方法，推導出一種簡便的引入?仔/4固定相移的實現方法。采用模塊化的設計方法使用VHDL語言編寫出源程序，在Virtex-II Pro 開發板上成功實現了整個系統。測試結果表明該系統正確實現了STEL-2000A的核心功能。
Abstract:
To overcome drawbacks of ASIC such as fixed functionality and upgrade difficulty, FPGA was used to realize the core functions of STEL-2000A. This paper used the DDS IP core provided by ISE to realize the NCO module, called hard core multiplier and implemented CIC filter in the down converter, described the principle and implementation detail of the demodulation of DQPSK, and derived a simple method to introduce a fixed phase shift of ?仔/4. The VHDL source code was designed by modularity method , and the complete system was successfully implemented on Virtex-II Pro development board. Test results indicate that this system successfully realize the core function of the STEL-2000A.
針對傳統集成電路（ASIC）功能固定、升級困難等缺點，利用FPGA實現了擴頻通信芯片STEL-2000A的核心功能。使用ISE提供的DDS IP核實現NCO模塊，在下變頻模塊調用了硬核乘法器并引入CIC濾波器進行低通濾波，給出了DQPSK解調的原理和實現方法，推導出一種簡便的引入?仔/4固定相移的實現方法。采用模塊化的設計方法使用VHDL語言編寫出源程序，在Virtex-II Pro 開發板上成功實現了整個系統。測試結果表明該系統正確實現了STEL-2000A的核心功能。
Abstract:
To overcome drawbacks of ASIC such as fixed functionality and upgrade difficulty, FPGA was used to realize the core functions of STEL-2000A. This paper used the DDS IP core provided by ISE to realize the NCO module, called hard core multiplier and implemented CIC filter in the down converter, described the principle and implementation detail of the demodulation of DQPSK, and derived a simple method to introduce a fixed phase shift of ?仔/4. The VHDL source code was designed by modularity method , and the complete system was successfully implemented on Virtex-II Pro development board. Test results indicate that this system successfully realize the core function of the STEL-2000A.
I. Introduction
This code exploits a previously undisclosed vulnerability in the bit string
decoding code in the Microsoft ASN.1 library. This vulnerability is not related
to the bit string vulnerability described in eEye advisory AD20040210-2. Both
vulnerabilities were fixed in the MS04-007 patch.
II. Screenshots
$ ./kill-bill.pl
. kill-bill : Microsoft ASN.1 remote exploit for CAN-2003-0818 (MS04-007)
by Solar Eclipse <solareclipse@phreedom.org>
Usage: kill-bill -p <port> -s <service> host
Services:
iis IIS HTTP server (port 80)
iis-ssl IIS HTTP server with SSL (port 443)
exchange Microsoft Exchange SMTP server (port 25)
smb-nbt SMB over NetBIOS (port 139)
smb SMB (port 445)
If a service is running on its default port you don t have to
specify both the service and the port.
Examples: kill-bill -s iis 192.168.0.1
kill-bill -p 80 192.168.0.1
kill-bill -p 1234 -s smb 192.168.0.1
-- WISHBONE revB2 compiant I2C master core
--
-- author: Richard Herveille
-- rev. 0.1 based on simple_i2c
-- rev. 0.2 april 27th 2001, fixed incomplete sensitivity list on assign_dato process (thanks to Matt Oseman)
-- rev. 0.3 may 4th 2001, fixed typo rev.0.2 txt -> txr
-- rev. 0.4 may 8th, added some remarks, fixed some sensitivity list issues
DVBstream is based on the ts-rtp package available at
http://www.linuxtv.org. It broadcasts a (subset of a) DVB transport
stream over a LAN using the rtp protocol. There were a couple of
small bugs in the original ts-rtp application, which I have fixed
here.
Following is a repost of the public domain make that I posted
to net.sources a couple of months ago. I have fixed a few bugs, and
added some more features, and the resulting changes amounted to
about as much text as the whole program (hence the repost).一個編譯器C代碼，詳見REDME。
Jan 04, 2007
1. Add SPI support, see spi.h and spi.c
2. Add driver.h
3. Modified keyboard module and display module
4. Add BitSet support, see bitset.h and bitset.c
5. fixed some bugs
Dec 25, 2006
1. Name this OS as AvrcX
2. Release AvrcX_1.0 alpha
