An acronym for Multiple-In, Multiple-Out, MIMO communication sends the same data as several signals simultaneously through multiple antennas, while still utilizing a single radio channel. This is a form of antenna diversity, which uses multiple antennas to improve signal quality and strength of an RF link. The data is split into multiple data streams at the transmission point and recombined on the receive side by another MIMO radio configured with the same number of antennas. The receiver is designed to take into account the slight time difference between receptions of each signal, any additional noise or interference, and even lost signals.
標簽： Understanding_the_Basics_of_MIMO
上傳時間： 2020-06-01
上傳用戶：shancjb
n the first part of this book, we give an introduction to the basic applications of wireless com- munications, as well as the technical problems inherent in this communication paradigm. After a brief history of wireless, Chapter 1 describes the different types of wireless services, and works out their fundamental differences. The subsequent Section 1.3 looks at the same problem from a different angle: what data rates, ranges, etc., occur in practical systems, and especially, what combination of performance measures are demanded (e.g., what data rates need to be transmitted over short distances; what data rates are required over long distances?) Chapter 2 then describes the technical challenges of communicating without wires, putting special emphasis on fading and co-channel interference. Chapter 3 describes the most elementary problem of designing a wireless system, namely to set up a link budget in either a noise-limited or an interference-limited system. After studying this part of the book, the reader should have an overview of different types of wireless services, and understand the technical challenges involved in each of them. The solutions to those challenges are described in the later parts of this book.
標簽： Communications Wireless Edition 2nd
上傳時間： 2020-06-01
上傳用戶：shancjb
Battery systems for energy storage are among the most relevant technologies of the 21 st century. They – in particular modern lithium-ion batteries (LIB) – are enablers for the market success of electric vehicles (EV) as well as for stationary energy storage solutions for balancing fluctuations in electricity grids resulting from the integrationofrenewableenergysourceswithvolatilesupply 1 .BothEVandstationary storage solutions are important because they foster the transition from the usage of fossil energy carriers towards cleaner renewable energy sources. Furthermore, EV cause less local air pollution and noise emissions compared to conventional combustion engine vehicles resulting in better air quality especially in urban areas. Unfortunately, to this day, various technological and economic challenges impede a broad application of batteries for EV as well as for large scale energy storage and load leveling in electricity grids.
標簽： Multiscale Simulation Approach
上傳時間： 2020-06-07
上傳用戶：shancjb
Current field forecast verification measures are inadequate, primarily because they compress the comparison between two complex spatial field processes into one number. Discrete wavelet transforms (DWTs) applied to analysis and contemporaneous forecast fields prove to be an insightful approach to verification problems. DWTs allow both filtering and compact physically interpretable partitioning of fields. These techniques are used to reduce or eliminate noise in the verification process and develop multivariate measures of field forecasting performance that are shown to improve upon existing verification procedures.
標簽： field forecast verification
上傳時間： 2020-07-22
上傳用戶：
This texts contemporary approach focuses on the concepts of linear control systems, rather than computational mechanics. Straightforward coverage includes an integrated treatment of both classical and modern control system methods. The text emphasizes design with discussions of problem formulation, design criteria, physical constraints, several design methods, and implementation of compensators.Discussions of topics not found in other texts--such as pole placement, model matching and robust tracking--add to the texts cutting-edge presentation. Students will appreciate the applications and discussions of practical aspects, including the leading problem in developing block diagrams, noise, disturbances, and plant perturbations. State feedback and state estimators are designed using state variable equations and transfer functions, offering a comparison of the two approaches. The incorporation of MATLAB throughout the text helps students to avoid time-consuming computation and concentrate on control system design and analysis
標簽： 控制系統
上傳時間： 2021-12-15
上傳用戶：
Precision, Low noise, CMOS, Rail-to-Rail, Input/Output Operational Amplifiers Data Sheet AD8605/AD8606/AD8608The AD8605, AD8606, and AD86081 are single, dual, and quad rail-to-rail input and output, single-supply amplifiers. They feature very low offset voltage, low input voltage and current noise, and wide signal bandwidth. They use the Analog Devices, Inc. patented DigiTrim? trimming technique, which achieves
標簽： 運算放大器
上傳時間： 2022-02-02
上傳用戶：
The PW5410B is a low noise, constant frequency (1.2MHz) switched capacitor voltage doubler. Itproduces a regulated output voltage from 1.8V to 5V input with up to 100mA of output current. Lowexternal parts count (one flying capacitor and two small bypass capacitors at VIN and VOUT) makethe PW5410B ideally suited for small, battery-powered applications
標簽： pw5410
上傳時間： 2022-02-11
上傳用戶：wangshoupeng199
The PW5410A is a low noise, constant frequency (1.2MHz) switched capacitor voltage doubler. Itproduces a regulated output voltage from 2.7V to 5V input with up to 250mA of output current. Lowexternal parts count (one flying capacitor and two small bypass capacitors at VIN and VOUT) makethe PW5410A ideally suited for small, battery-powered applications
標簽： pw5410
上傳時間： 2022-02-11
上傳用戶：
The PW2053 is a high-efficiency monolithic synchronous buck regulator using a constantfrequency, current mode architecture. The device is available in an adjustable version. Supply currentwith no load is 40uA and drops to <1uA in shutdown. The 2.5V to 5.5V input voltage range makesthe PW2053 ideally suited for single Li-Ion battery powered applications. 100% duty cycle provideslow dropout operation, extending battery life in portable systems. PWM/PFM mode operationprovides very low output ripple voltage for noise sensitive applications. Switching frequency isinternally set at 1.2MHz, allowing the use of small surface mount inductors and capacitors. Lowoutput voltages are easily supported with the 0.6V feedback reference voltage
標簽： pw2053
上傳時間： 2022-02-14
上傳用戶：jason_vip1
為了提高超高頻RFID系統中閱讀器在低信噪比的情況下仍具有較高的識別能力,提出一種基于FPGA系統結合軟件無線電方法實現超高頻RFID射頻前端電路方案。超高頻射頻識別系統必須符合EPC Class 1generation 2標準,所設計的電路系統以Xilinx公司的XC6SLX16-2CSG324FPGA芯片為硬件基礎,將數字基帶調制解調和中頻濾波電路在FPGA系統中設計實現,重點闡述了射頻前端電路的設計結構、AD/DA轉換電路,以及數字濾波器的設計。實驗結果表明,所設計的超高頻RFID閱讀器簡化了前端電路系統結構,提升了穩定性,增強了抗干擾能力。該電路系統在信噪比較低的情況下,能夠較好地實現915MHz頻率的射頻接收和發送。In order to improve the reader UHF RFID system still has a higher ability to identify,in the case of low signal-to-noise ratio.The UHF RFID systems must comply with EPC Class 1 generation 2 standard.In this paper,the design of the circuit system based on Xilinx＇s XC6SLX16-2CSG324 FPGA chip,and presents UHF RFID RF front-end circuit with software radio based on FPGA system.Digital baseband modem and IF filter circuit is designed and implemented in the FPGA system,and focused on designing the structure of the RF front-end circuit,AD/DA conversion circuits,and digital filter.Experimental results show that the UHF RFID reader de...
標簽： 915mhz 超高頻 rfid 閱讀 射頻 前端 電路 設計
上傳時間： 2022-04-17
上傳用戶：shjgzh
蟲蟲下載站版權所有 京ICP備2021023401號-1
