A programmable digital signal processor (PDSP) is a special-purpose microprocessor
with specialized architecture and instruction set for implementing DSP
algorithms. Typical architectural features include multiple memory partitions (onchip,
off-chip, data memory, program memory, etc.), multiple (generally pipelined)
arithmetic and logic units (ALUs), nonuniform register sets, and extensive
hardware numeric support [1,2]. Single-chip PDSPs have become increasingly
popular for real-time DSP applications [3,4].
提出一種基于凌陽單片機的步進電機加減速的控制方法。采用凌陽科技推出的16位結構工控單片機SPMC75F2413A為控制器,由Allegro公司生產的兩相步進電機專用驅動器件SLA7042M構成步進電機的驅動電路,在傳統的3段直線加減速控制算法基礎上增加至7段S形曲線加減速過程,控制步進電機的啟動和停止。實驗結果表明,該控制方法克服了直線加減速中不連續、易造成系統沖擊的問題,整個系統實現柔性控制,電機啟動、停止連續性能提高30%。
Abstract:
The method of controlled stepping motor is referred based on SPMC75F2413A MCU, which adopts the 16 knots SPMC75F2413A MCU as the controller. The special-purpose actuation chip SLA7042M of two stepping motor produced by Allegro Corporation constituted to actuation electric circuit. The purpose of increasing to seven section of S shape curve based on the traditional three sections of straight line is to control the start and stop process of stepping motor. The experimental results show that the control method solves easy to pull-out and overshot problems. The overall system realizes flexible control, and the performance of motor start or stop continuity is increased 30%
ABAQUS is a general purpose finite element analysis program which is widely used to analyses mechanical, structure and civil engineering problems. Abaqus has some special feature for analysing fracture mechanics problems, and therefore it is a main tools for the FE-analysis in the Fracture Group at the Mechanical Engineering at Glasgow Universtity. The software which can transfer
data from Abaqus into a Matlab readable environment has been developed as a part of a research program in Constraint Estimation in Fracture Mechanics. This research program was funded by a grant from the Defence Research Agency through Prof. J. Sumpter.
PCI ExpressTM Architecture
Add-in Card Compliance Checklist for the PCI Express Base 1.0a SpecificationThe PCI Special Interest Group disclaims all warranties and liability for the use of this document and the information contained herein and assumes no responsibility for any errors that may appear in this document, nor does the PCI Special Interest Group make a commitment to update the information contained herein.Contact the PCI Special Interest Group office to obtain the latest revision of this checklistQuestions regarding the ths document or membership in the PCI Special Interest Group may be forwarded tPCI Special Interest Group5440 SW Westgate Drive #217Portland, OR 97221Phone: 503-291-2569Fax: 503-297-1090 DISCLAIMERThis document is provided "as is" with no warranties whatsoever, including any warranty of merchantability, noninfringement, fitness for any particular purpose, or any warranty otherwise arising out of any proposal, specification, or sample. The PCI SIG disclaims all liability for infringement of proprietary rights, relating to use of information in this specification. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted herein.
WHAT MIME64 IS: MIME64 is an encoding described in RFC1341 as MIME base64.Its purpose is to encode binary files into ASCII so that they may be passedthrough e-mail gates. In this regard, MIME64 is similar to UUENCODE.Although most binaries these days are transmitted using UUENCODE, Ihave seen a few using MIME64, and I have had requests from friends thatI decode MIME64 files that have fallen into their hands. As long assome MIME64 continues to exist, a package such as this one is usefulto have.
USB Manager(usbmgr) 0.4.8 Shuu Yamaguchi <shuu@wondernetworkresources.com> Special Helper: Philipp Thomas When USB devices connect to or disconnect from a USB hub, the usbmgr works as the following according to configuration. a) It loads and unloads files Linux kernel modules. b) It execute file to setup USB devices.