?? ddr_sdram.vhd
字號:
--
-- LOGIC CORE: DDR SDRAM Controller
-- MODULE NAME: ddr_sdram()
-- COMPANY: Northwest Logic, Inc.
-- www.nwlogic.com
--
-- REVISION HISTORY:
--
-- Revision 1.0 06/27/2000 Description: Initial Release.
--
-- FUNCTIONAL DESCRIPTION:
--
-- This module is the top level module for the DDR SDRAM controller.
--
-- Copyright Northwest Logic, Inc., 2000. All rights reserved.
--
library ieee;
use ieee.std_logic_1164.all;
entity ddr_sdram is
generic (
ASIZE : integer := 22;
DSIZE : integer := 128;
ROWSIZE : integer := 12;
COLSIZE : integer := 8;
BANKSIZE : integer := 2;
ROWSTART : integer := 8;
COLSTART : integer := 0;
BANKSTART : integer := 19
);
port (
CLK : in std_logic; --System Clock
RESET_N : in std_logic; --System Reset
ADDR : in std_logic_vector(ASIZE-1 downto 0); --Address for controller requests
CMD : in std_logic_vector(2 downto 0); --Controller command
CMDACK : out std_logic; --Controller command acknowledgement
DATAIN : in std_logic_vector(DSIZE-1 downto 0); --Data input
DATAOUT : out std_logic_vector(DSIZE-1 downto 0); --Data output
DM : in std_logic_vector(DSIZE/8-1 downto 0); --Data mask input
SA : out std_logic_vector(11 downto 0); --SDRAM address output
BA : out std_logic_vector(1 downto 0); --SDRAM bank address
CS_N : out std_logic_vector(1 downto 0); --SDRAM Chip Selects
CKE : out std_logic; --SDRAM clock enable
RAS_N : out std_logic; --SDRAM Row address Strobe
CAS_N : out std_logic; --SDRAM Column address Strobe
WE_N : out std_logic; --SDRAM write enable
DQ : inout std_logic_vector(DSIZE/2-1 downto 0); --SDRAM data bus
DQM : out std_logic_vector(DSIZE/16-1 downto 0); --SDRAM data mask lines
DQS : inout std_logic_vector(DSIZE/16-1 downto 0)
);
end ddr_sdram;
architecture RTL of ddr_sdram is
-- component declarations
component ddr_command
generic (
ASIZE : integer := 22;
DSIZE : integer := 128;
ROWSIZE : integer := 12;
COLSIZE : integer := 8;
BANKSIZE : integer := 2;
ROWSTART : integer := 8; -- Starting position of the row address within ADDR
COLSTART : integer := 0; -- Starting position of the column address within ADDR
BANKSTART : integer := 19 -- Starting position of the bank address within ADDR
);
port (
CLK : in std_logic; -- System Clock
RESET_N : in std_logic; -- System Reset
SADDR : in std_logic_vector(ASIZE-1 downto 0); -- Address
NOP : in std_logic; -- Decoded NOP command
READA : in std_logic; -- Decoded READA command
WRITEA : in std_logic; -- Decoded WRITEA command
REFRESH : in std_logic; -- Decoded REFRESH command
PRECHARGE : in std_logic; -- Decoded PRECHARGE command
LOAD_MODE : in std_logic; -- Decoded LOAD_MODE command
SC_CL : in std_logic_vector(1 downto 0); -- Programmed CAS latency
SC_RC : in std_logic_vector(1 downto 0); -- Programmed RC delay
SC_RRD : in std_logic_vector(3 downto 0); -- Programmed RRD delay
SC_PM : in std_logic; -- programmed Page Mode
SC_BL : in std_logic_vector(3 downto 0); -- Programmed burst length
REF_REQ : in std_logic; -- Hidden refresh request
REF_ACK : out std_logic; -- Refresh request acknowledge
CM_ACK : out std_logic; -- Command acknowledge
OE : out std_logic; -- OE signal for data path module
SA : out std_logic_vector(11 downto 0); -- SDRAM address
BA : out std_logic_vector(1 downto 0); -- SDRAM bank address
CS_N : out std_logic_vector(1 downto 0); -- SDRAM chip selects
CKE : out std_logic; -- SDRAM clock enable
RAS_N : out std_logic; -- SDRAM RAS
CAS_N : out std_logic; -- SDRAM CAS
WE_N : out std_logic -- SDRAM WE_N
);
end component;
component ddr_data_path
port (
CLK100 : in std_logic; -- System Clock
CLK200 : in std_logic; -- System Clock
RESET_N : in std_logic; -- System Reset
OE : in std_logic; -- Data output(to the SDRAM) enable
DATAIN : in std_logic_vector(31 downto 0); -- Data input from the host
DM : in std_logic_vector(3 downto 0); -- byte data masks
DATAOUT : out std_logic_vector(31 downto 0); -- Read data output to host
DQIN : in std_logic_vector(15 downto 0); -- SDRAM data bus
DQOUT : out std_logic_vector(15 downto 0);
DQM : out std_logic_vector(1 downto 0); -- SDRAM data mask ouputs
DQS : inout std_logic_vector(1 downto 0);
SC_CL : in std_logic_vector(1 downto 0);
DQOE : out std_logic
);
end component;
component ddr_control_interface
generic (
ASIZE : integer := 32
);
port (
CLK : in std_logic; -- System Clock
RESET_N : in std_logic; -- System Reset
CMD : in std_logic_vector(2 downto 0); -- Command input
ADDR : in std_logic_vector(ASIZE-1 downto 0); -- Address
REF_ACK : in std_logic; -- Refresh request acknowledge
CM_ACK : in std_logic; -- Command acknowledge
NOP : out std_logic; -- Decoded NOP command
READA : out std_logic; -- Decoded READA command
WRITEA : out std_logic; -- Decoded WRITEA command
REFRESH : out std_logic; -- Decoded REFRESH command
PRECHARGE : out std_logic; -- Decoded PRECHARGE command
LOAD_MODE : out std_logic; -- Decoded LOAD_MODE command
SADDR : out std_logic_vector(ASIZE-1 downto 0); -- Registered version of ADDR
SC_CL : out std_logic_vector(1 downto 0); -- Programmed CAS latency
SC_RC : out std_logic_vector(1 downto 0); -- Programmed RC delay
SC_RRD : out std_logic_vector(3 downto 0); -- Programmed RRD delay
SC_PM : out std_logic; -- programmed Page Mode
SC_BL : out std_logic_vector(3 downto 0); -- Programmed burst length
REF_REQ : out std_logic; -- Hidden refresh request
CMD_ACK : out std_logic -- Command acknowledge
);
end component;
attribute syn_black_box: boolean;
component pll1
port (
inclock : in std_logic;
locked : out std_logic;
clock0 : out std_logic;
clock1 : out std_logic
);
end component;
attribute syn_black_box of pll1: component is true;
-- signal declarations
signal ISA : std_logic_vector(11 downto 0); --SDRAM address output
signal IBA : std_logic_vector(1 downto 0); --SDRAM bank address
signal ICS_N : std_logic_vector(1 downto 0); --SDRAM Chip Selects
signal ICKE : std_logic; --SDRAM clock enable
signal IRAS_N : std_logic; --SDRAM Row address Strobe
signal ICAS_N : std_logic; --SDRAM Column address Strobe
signal IWE_N : std_logic;
signal DQIN : std_logic_vector(DSIZE/2-1 downto 0);
signal IDATAOUT : std_logic_vector(DSIZE-1 downto 0);
signal DQOUT : std_logic_vector(DSIZE/2-1 downto 0); --SDRAM write enable
signal saddr : std_logic_vector(ASIZE-1 downto 0);
signal sc_cl : std_logic_vector(1 downto 0);
signal sc_rc : std_logic_vector(1 downto 0);
signal sc_rrd : std_logic_vector(3 downto 0);
signal sc_pm : std_logic;
signal sc_bl : std_logic_vector(3 downto 0);
signal load_mode : std_logic;
signal nop : std_logic;
signal reada : std_logic;
signal writea : std_logic;
signal refresh : std_logic;
signal precharge : std_logic;
signal oe : std_logic;
signal ref_req : std_logic;
signal ref_ack : std_logic;
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -