?? ro_cnt.vhd
字號:
------------------------------------------------------------------------- -------- Run-Once Counter -------- -------- Author: Richard Herveille -------- richard@asics.ws -------- www.asics.ws -------- ----------------------------------------------------------------------------- -------- Copyright (C) 2001, 2002 Richard Herveille -------- richard@asics.ws -------- -------- This source file may be used and distributed without -------- restriction provided that this copyright statement is not -------- removed from the file and that any derivative work contains -------- the original copyright notice and the associated disclaimer.-------- -------- THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY -------- EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED -------- TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -------- FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL THE AUTHOR -------- OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -------- INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -------- (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE -------- GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR -------- BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF -------- LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -------- (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT -------- OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -------- POSSIBILITY OF SUCH DAMAGE. -------- ----------------------------------------------------------------------------- CVS Log---- $Id: ro_cnt.vhd,v 1.1 2002/03/01 03:49:25 rherveille Exp $---- $Date: 2002/03/01 03:49:25 $-- $Revision: 1.1 $-- $Author: rherveille $-- $Locker: $-- $State: Exp $---- Change History:-- $Log: ro_cnt.vhd,v $-- Revision 1.1 2002/03/01 03:49:25 rherveille-- Changed internal counter libraries.-- Split counter.vhd into separate files.-- Core is in same state as Verilog version now.--library ieee;use ieee.std_logic_1164.all;use ieee.std_logic_arith.all;entity ro_cnt is generic( SIZE : natural := 8; UD : std_logic := '0'; -- default count down ID : natural := 0 -- initial data after reset ); port( clk : in std_logic; -- master clock nReset : in std_logic := '1'; -- asynchronous active low reset rst : in std_logic := '0'; -- synchronous active high reset cnt_en : in std_logic := '1'; -- count enable go : in std_logic; -- load counter and start sequence done : out std_logic; -- done counting d : in unsigned(SIZE -1 downto 0); -- load counter value q : out unsigned(SIZE -1 downto 0) -- current counter value );end entity ro_cnt;architecture structural of ro_cnt is component ud_cnt is generic( SIZE : natural := 8; RESD : natural := 0 -- initial data after reset ); port( clk : in std_logic; -- master clock nReset : in std_logic := '1'; -- asynchronous active low reset rst : in std_logic := '0'; -- synchronous active high reset cnt_en : in std_logic := '1'; -- count enable ud : in std_logic := '0'; -- up / not down nld : in std_logic := '1'; -- synchronous active low load d : in unsigned(SIZE -1 downto 0); -- load counter value q : out unsigned(SIZE -1 downto 0); -- current counter value rci : in std_logic := '1'; -- carry input rco : out std_logic -- carry output ); end component ud_cnt; signal rci, rco, nld : std_logic;begin gen_ctrl: process(clk, nReset) begin if (nReset = '0') then rci <= '0'; elsif (clk'event and clk = '1') then if (rst = '1') then rci <= '0'; else rci <= go or (rci and not rco); end if; end if; end process; nld <= not go; -- hookup counter cnt : ud_cnt generic map ( SIZE => SIZE, RESD => ID ) port map ( clk => clk, nReset => nReset, rst => rst, cnt_en => cnt_en, ud => UD, nld => nld, D => D, Q => Q, rci => rci, rco => rco ); done <= rco;end architecture structural;
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -