?? fft.pin
字號:
-- Copyright (C) 1991-2003 Altera Corporation
-- Any megafunction design, and related netlist (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only
-- to program PLD devices (but not masked PLD devices) from Altera. Any
-- other use of such megafunction design, netlist, support information,
-- device programming or simulation file, or any other related documentation
-- or information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner. Title to the
-- intellectual property, including patents, copyrights, trademarks, trade
-- secrets, or maskworks, embodied in any such megafunction design, netlist,
-- support information, device programming or simulation file, or any other
-- related documentation or information provided by Altera or a megafunction
-- partner, remains with Altera, the megafunction partner, or their respective
-- licensors. No other licenses, including any licenses needed under any third
-- party's intellectual property, are provided herein.
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
-- NC : No Connect. This pin has no internal connection to the device.
-- VCCINT : Dedicated power pin, which MUST be connected to VCC (1.5V).
-- VCCIO : Dedicated power pin, which MUST be connected to VCC
-- of its bank.
-- Bank 1: 3.3V
-- Bank 2: 3.3V
-- Bank 3: 3.3V
-- Bank 4: 3.3V
-- Bank 5: 3.3V
-- Bank 6: 3.3V
-- Bank 7: 3.3V
-- Bank 8: 3.3V
-- Bank 9: 3.3V
-- Bank 10: 3.3V
-- Bank 11: 3.3V
-- Bank 12: 3.3V
-- GND : Dedicated ground pin, which MUST be connected to GND.
-- GND+ : Unused input. This pin should be connected to GND. It may also
-- be connected to a valid signal on the board (low, high, or
-- toggling) if that signal is required for a different revision
-- of the design.
-- GND* : Unused I/O pin. This pin can either be left unconnected or
-- connected to GND. Connecting this pin to GND will improve the
-- device's immunity to noise.
---------------------------------------------------------------------------------
Quartus II Version 3.0 Build 199 06/26/2003 SJ Full Version
CHIP "fft" ASSIGNED TO AN: EP1S10B672C6
Pin Name/Usage : Location : Dir. : I/O Standard : Voltage : I/O Bank : User Assignment
-------------------------------------------------------------------------------------------------------------
GND : A2 : gnd : : : 1 :
out2_im[3] : A3 : output : LVTTL : : 3 : N
VCCIO3 : A4 : power : : 3.3V : 3 :
x1_im[4] : A5 : input : LVTTL : : 3 : N
out2_im1[4] : A6 : output : LVTTL : : 3 : N
out2_im[1] : A7 : output : LVTTL : : 3 : N
out2_im[4] : A8 : output : LVTTL : : 3 : N
out2_im[0] : A9 : output : LVTTL : : 3 : N
out1_im1[4] : A10 : output : LVTTL : : 3 : N
VCCIO3 : A11 : power : : 3.3V : 3 :
out_im[10] : A12 : output : LVTTL : : 3 : N
GND : A13 : gnd : : : 1 :
GND : A14 : gnd : : : 1 :
x2_re[0] : A15 : input : LVTTL : : 4 : N
VCCIO4 : A16 : power : : 3.3V : 4 :
x2_re[3] : A17 : input : LVTTL : : 4 : N
NC : A18 : : : : 1 :
x2_im[3] : A19 : input : LVTTL : : 4 : N
out3[1] : A20 : output : LVTTL : : 4 : N
out4[5] : A21 : output : LVTTL : : 4 : N
out4[12] : A22 : output : LVTTL : : 4 : N
VCCIO4 : A23 : power : : 3.3V : 4 :
out4[9] : A24 : output : LVTTL : : 4 : N
GND : A25 : gnd : : : 1 :
GND* : AA1 : : : : 1 :
GND* : AA2 : : : : 1 :
GND* : AA3 : : : : 1 :
GND* : AA4 : : : : 1 :
GND* : AA5 : : : : 1 :
GND* : AA6 : : : : 1 :
GND* : AA7 : : : : 8 :
GND* : AA8 : : : : 8 :
GND* : AA9 : : : : 8 :
out1_re[4] : AA10 : output : LVTTL : : 8 : N
out1_re1[2] : AA11 : output : LVTTL : : 8 : N
out1_re[5] : AA12 : output : LVTTL : : 11 : N
out1_re1[1] : AA13 : output : LVTTL : : 11 : N
out1_re1[6] : AA14 : output : LVTTL : : 11 : N
nIO_PULLUP : AA15 : : : : 7 :
NC : AA16 : : : : 1 :
out2_re[3] : AA17 : output : LVTTL : : 7 : N
out2_re1[7] : AA18 : output : LVTTL : : 7 : N
out_re[8] : AA19 : output : LVTTL : : 7 : N
out_re[11] : AA20 : output : LVTTL : : 7 : N
GND* : AA21 : : : : 7 :
out1[9] : AA22 : output : LVTTL : : 6 : N
out2[9] : AA23 : output : LVTTL : : 6 : N
GND* : AA24 : : : : 6 :
GND* : AA25 : : : : 6 :
GND* : AA26 : : : : 6 :
NC : AB1 : : : : 1 :
NC : AB2 : : : : 1 :
GND* : AB3 : : : : 1 :
GND* : AB4 : : : : 1 :
GND* : AB5 : : : : 8 :
NC : AB6 : : : : 1 :
GND* : AB7 : : : : 8 :
NC : AB8 : : : : 1 :
GND* : AB9 : : : : 8 :
GND* : AB10 : : : : 8 :
out1_re1[5] : AB11 : output : LVTTL : : 8 : N
out1_re1[4] : AB12 : output : LVTTL : : 11 : N
out1_re[0] : AB13 : output : LVTTL : : 11 : N
out1_re[6] : AB14 : output : LVTTL : : 11 : N
GND : AB15 : : : : 7 :
out2_re1[1] : AB16 : output : LVTTL : : 7 : N
out_re[9] : AB17 : output : LVTTL : : 7 : N
GND : AB18 : : : : 7 :
out2[8] : AB19 : output : LVTTL : : 7 : N
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -