?? gh_4byte_reg_256.vhd
字號:
---------------------------------------------------------------------
-- Filename: gh_4byte_reg_256.vhd
--
-- Description:
-- This has 256 configuration bits
--
-- Copyright (c) 2005 by George Huber
-- an OpenCores.org Project
-- free to use, but see documentation for conditions
--
-- Revision History:
-- Revision Date Author Comment
-- -------- ---------- --------- -----------
-- 1.0 10/29/05 G Huber Initial revision
--
---------------------------------------------------------------------
LIBRARY ieee;
USE ieee.std_logic_1164.all;
ENTITY gh_4byte_reg_256 IS
port(
clk : IN STD_LOGIC; -- sample clock
rst : IN STD_LOGIC;
CSn : IN STD_LOGIC; -- chip select
WR : IN STD_LOGIC; -- Write signal
BE : IN STD_LOGIC_vector(3 downto 0); -- byte enables
A : IN STD_LOGIC_vector(2 downto 0); -- address bus
D : IN STD_LOGIC_vector(31 downto 0);-- data bus in
RD : out STD_LOGIC_VECTOR(31 downto 0); -- read data
Q : out STD_LOGIC_VECTOR(255 downto 0)
);
END gh_4byte_reg_256;
ARCHITECTURE a OF gh_4byte_reg_256 IS
COMPONENT gh_decode_3to8 IS
port(
A : IN STD_LOGIC_VECTOR(2 DOWNTO 0); -- address
G1 : IN STD_LOGIC; -- enable positive
G2n : IN STD_LOGIC; -- enable negitive
G3n : IN STD_LOGIC; -- enable negitive
Y : out STD_LOGIC_VECTOR(7 downto 0)
);
END COMPONENT;
COMPONENT gh_4byte_reg_32 IS
port(
clk : IN STD_LOGIC; -- sample clock
rst : IN STD_LOGIC;
WR : IN STD_LOGIC; -- Write signal
D : IN STD_LOGIC_vector(31 downto 0);-- data bus in
BE : IN STD_LOGIC_vector(3 downto 0); -- byte enable
Q : out STD_LOGIC_VECTOR(31 downto 0) -- 2nd register
);
END COMPONENT;
signal iWR : STD_LOGIC_VECTOR(7 downto 0);
signal iQ : STD_LOGIC_VECTOR(255 downto 0);
BEGIN
--
-- OUTPUT
Q <= iQ;
-- read data
RD <= iQ(31 downto 0) when (A = o"0") else
iQ(63 downto 32) when (A = o"1") else
iQ(95 downto 64) when (A = o"2") else
iQ(127 downto 96) when (A = o"3") else
iQ(159 downto 128) when (A = o"4") else
iQ(191 downto 160) when (A = o"5") else
iQ(223 downto 192) when (A = o"6") else
iQ(255 downto 224);
-- decode logic
U1 : gh_decode_3to8 PORT MAP (A(2 downto 0),WR,'0',CSn,iWR);
----------------------------------------------------------------------------
----------------------------------------------------------------------------
-- Registers
U2 : gh_4byte_reg_32 PORT MAP
(clk,rst,iWR(0),D(31 downto 0),BE,
iQ(31 downto 0));
U3 : gh_4byte_reg_32 PORT MAP
(clk,rst,iWR(1),D(31 downto 0),BE,
iQ(63 downto 32));
U4 : gh_4byte_reg_32 PORT MAP
(clk,rst,iWR(2),D(31 downto 0),BE,
iQ(95 downto 64));
U5 : gh_4byte_reg_32 PORT MAP
(clk,rst,iWR(3),D(31 downto 0),BE,
iQ(127 downto 96));
U6 : gh_4byte_reg_32 PORT MAP
(clk,rst,iWR(4),D(31 downto 0),BE,
iQ(159 downto 128));
U7 : gh_4byte_reg_32 PORT MAP
(clk,rst,iWR(5),D(31 downto 0),BE,
iQ(191 downto 160));
U8 : gh_4byte_reg_32 PORT MAP
(clk,rst,iWR(6),D(31 downto 0),BE,
iQ(223 downto 192));
U9 : gh_4byte_reg_32 PORT MAP
(clk,rst,iWR(7),D(31 downto 0),BE,
iQ(255 downto 224));
END;
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -