廣州致遠電子有限公司近期推出了系列的工業級微功率DC-DC電源模塊，能夠廣泛應用于低頻模擬電路，大功率IGBT驅動,純數字電路,模擬前端隔離電路,RS232/RS485/D422隔離通訊接口，CAN-BUS隔離通訊接口，運算放大器電源和手持便攜儀表等多種場合。其全面性與成熟可靠的設計，可以解決用戶在電源和模擬前端部分設計中所遇到的較多難題，并可以節省開發時間，使用戶的產品更快推出市場.
上傳時間： 2013-10-17
上傳用戶：妄想演繹師
分析了對小功率光伏并網逆變器拓撲結構的要求，簡單介紹了幾種典型的并網逆變器的拓撲結構，指出了各個拓撲結構的優缺點、效率和適用場合。給出了一種利用軟開關技術的單相全橋并網逆變器的拓撲結構（DC/AC），分析了其工作過程，通過諧振可以實現主功率開關的零電壓開通和關斷，而且輔助開關和二極管都是零電流開通和關斷，大大減小了功率器件的開關損耗，提高了逆變器的效率。最后，介紹了開關器件的選擇問題
上傳時間： 2013-10-13
上傳用戶：royzhangsz
帶中文字庫的128X64是一種具有4位/8位并行、2線或3線串行多種接口方式，內部含有國標一級、二級簡體中文字庫的點陣圖形液晶顯示模塊；其顯示分辨率為128×64, 內置8192個16*16點漢字，和128個16*8點ASCII字符集.利用該模塊靈活的接口方式和簡單、方便的操作指令，可構成全中文人機交互圖形界面。可以顯示8×4行16×16點陣的漢字. 也可完成圖形顯示.低電壓低功耗是其又一顯著特點。由該模塊構成的液晶顯示方案與同類型的圖形點陣液晶顯示模塊相比，不論硬件電路結構或顯示程序都要簡潔得多，且該模塊的價格也略低于相同點陣的圖形液晶模塊。 基本特性: 低電源電壓（VDD:+3.0--+5.5V） 顯示分辨率:128×64點 內置漢字字庫，提供8192個16×16點陣漢字(簡繁體可選) 內置 128個16×8點陣字符 2MHZ時鐘頻率 顯示方式：STN、半透、正顯 驅動方式：1/32DUTY，1/5BIAS 視角方向：6點 背光方式：側部高亮白色LED，功耗僅為普通LED的1/5—1/10 通訊方式：串行、并口可選 內置DC-DC轉換電路，無需外加負壓 無需片選信號，簡化軟件設計 工作溫度: 0℃ - +55℃ ,存儲溫度: -20℃ - +60℃ 12864（帶字庫漢字顯示演示程序） ;*************************************************************************** ;* sxj1974@163.com (51c51 test web) www.8951.com * ;* Create by :石學軍 www.51c51.com 更多例程請登陸網站 * ;*************************************************************************** RS EQU P2.0 RW EQU P2.1 E EQU P2.2 PSB EQU P2.3 RST EQU P2.5 ;----------------------------------------------- LCD_X EQU 30H LCD_Y EQU 31H COUNT EQU 32H COUNT1 EQU 33H COUNT2 EQU 34H COUNT3 EQU 35H ;----------------------------------------------- LCD_DATA EQU 36H LCD_DATA1 EQU 37H LCD_DATA2 EQU 38H STORE EQU 39H ;----------------------------------------------- ORG 0000H LJMP MAIN ORG 0100H ;----------------------------------------------- MAIN: MOV SP,#5FH CLR RST ;復位 LCALL DELAY4 SETB RST NOP SETB PSB ;通訊方式為8位數據并口 ;********************初始化********************** LGS0: MOV A,#34H ;34H--擴充指令操作 LCALL SEND_I MOV A,#30H ;30H--基本指令操作 LCALL SEND_I MOV A,#01H ;清除顯示 LCALL SEND_I MOV A,#06H ;指定在資料寫入或讀取時，光標的移動方向 LCALL SEND_I ;DDRAM 的地址計數器(AC)加1 MOV A,#0CH ;開顯示,關光標,不閃爍 LCALL SEND_I ;=============================================== TU_PLAY1: MOV DPTR,#TU_TAB1 ;顯示圖形 LCALL PHO_DISP LCALL DELAY3 ;================================================= ;;顯示漢字和字符 ;加入80ms的延時，使你能夠看清楚顯示的過程 ;根據漢字顯示坐標分段寫入（順序寫入） ;================================================= HAN_WR2: LCALL CLEAR_P HAN_WR2A: MOV DPTR,#TAB1A ;顯示漢字和字符 MOV COUNT,#10H ;地址計數器設為16。 MOV A,#80H ;第一行起始地址 LCALL SEND_I LCALL QUSHU HAN_WR2B: MOV DPTR,#TAB1B ;顯示漢字和字符 MOV COUNT,#10H ;地址計數器設為16。 MOV A,#90H ;第二行起始地址 LCALL SEND_I LCALL QUSHU HAN_WR2C: MOV DPTR,#TAB1C ;顯示漢字和字符 MOV COUNT,#10H ;地址計數器設為16。 MOV A,#88H ;第三行起始地址 LCALL SEND_I LCALL QUSHU HAN_WR2D: MOV DPTR,#TAB1D ;顯示漢字和字符 MOV COUNT,#10H ;地址計數器設為16。 MOV A,#98H ;第四行起始地址 LCALL SEND_I LCALL QUSHU LCALL DELAY3 LCALL FLASH LCALL CLEAR_P JMP TU_PLAY2 ;---------------------------------------------- ;TU_PLAY1: MOV DPTR,#TU_TAB1 ;顯示圖形 LCALL PHO_DISP LCALL DELAY3 ;---------------------------------------------- TU_PLAY2: MOV DPTR,#TU_TAB2 ;顯示圖形 LCALL PHO_DISP LCALL DELAY3 ;---------------------------------------------- TU_PLAY3: MOV DPTR,#TU_TAB4 ;顯示圖形 LCALL PHO_DISP LCALL DELAY3 ;----------------------------------------------- ;顯示點陣 ;----------------------------------------------- LATPLAY1: MOV A,#01H ;清屏 LCALL SEND_I MOV LCD_DATA1,#0CCH ;顯示點陣 MOV LCD_DATA2,#0CCH LCALL LAT_DISP LCALL DELAY3 LCALL CLEAR_P KU_PLAY2: LJMP TU_PLAY1 ;=============================================== ;全屏顯示圖形子程序 ;=============================================== PHO_DISP: MOV COUNT3,#02H MOV LCD_X,#80H PHO_DISP1: MOV LCD_Y,#80H MOV COUNT2,#20H PHO_DISP2: MOV COUNT1,#10H LCALL WR_ZB PHO_DISP3: CLR A MOVC A,@A+DPTR LCALL SEND_D INC DPTR DJNZ COUNT1,PHO_DISP3 INC LCD_Y DJNZ COUNT2,PHO_DISP2 MOV LCD_X,#88H DJNZ COUNT3,PHO_DISP1 MOV A,#36H LCALL SEND_I MOV A,#30H LCALL SEND_I RET ;---------------------------------------------- CLRRAM: MOV LCD_DATA1,#00H ;GDRAM寫0子程序 MOV LCD_DATA2,#00H LCALL LAT_DISP RET ;============================================== ;顯示點陣子程序 ;============================================== LAT_DISP: MOV COUNT3,#02H MOV LCD_X,#80H LAT_DISP1: MOV LCD_Y,#80H CLR F0 MOV COUNT2,#20H LAT_DISP2: MOV COUNT1,#10H LCALL WR_ZB LAT_DISP3: JB F0,LAT_DISP32 MOV LCD_DATA,LCD_DATA1 AJMP LAT_DISP31 LAT_DISP32: MOV LCD_DATA,LCD_DATA2 LAT_DISP31: MOV A,LCD_DATA LCALL SEND_D DJNZ COUNT1,LAT_DISP31 INC LCD_Y CPL F0 DJNZ COUNT2,LAT_DISP2 MOV LCD_X,#88H DJNZ COUNT3,LAT_DISP1 MOV A,#36H LCALL SEND_I MOV A,#30H LCALL SEND_I RET ;--------------------------------------------- WR_ZB: MOV A,#34H LCALL SEND_I MOV A,LCD_Y LCALL SEND_I MOV A,LCD_X LCALL SEND_I MOV A,#30H LCALL SEND_I RET ;=============================================== FLASH: MOV A,#08H ;關閉顯示 LCALL SEND_I LCALL DELAY5 MOV A,#0CH ;開顯示,關光標,不閃爍 LCALL SEND_I LCALL DELAY5 MOV A,#08H ;關閉顯示 LCALL SEND_I LCALL DELAY5 MOV A,#0CH ;開顯示,關光標,不閃爍 LCALL SEND_I LCALL DELAY5 MOV A,#08H ;關閉顯示 LCALL SEND_I LCALL DELAY5 RET ;================================================== ;清屏 ;================================================== CLEAR_P: MOV A,#01H ;清屏 LCALL SEND_I MOV A,#34H LCALL SEND_I MOV A,#30H LCALL SEND_I RET ;================================================== ;查表取數據送顯示 ;================================================== QUSHU: CLR A MOVC A,@A+DPTR ;查表取數據 LCALL SEND_D ;送顯示 INC DPTR LCALL DELAY4 ;延時80ms, DJNZ COUNT,QUSHU RET ;=============================================== ;寫數據子程序 ;RS=1,RW=0,E=高脈沖,D0-D7=數據 ;=============================================== SEND_D: LCALL CHK_BUSY ;寫數據子程序 SETB RS CLR RW MOV P0,A SETB E NOP NOP CLR E RET ;=============================================== ;寫指令子程序 ;RS=0,RW=0,E=高脈沖,D0-D7=指令碼 ;=============================================== SEND_I: LCALL CHK_BUSY CLR RS CLR RW MOV P0,A SETB E NOP NOP CLR E RET ;================================================ ;讀數據子程序 ;RS=1,RW=1,E=H,D0-D7=數據 ;================================================ READ_D: LCALL CHK_BUSY ;讀數據子程序 SETB RS SETB RW SETB E NOP MOV A,P0 CLR E MOV STORE,A RET ;================================================ ;;測忙碌子程序 ;RS=0,RW=1,E=H,D0-D7=狀態字 ;================================================ CHK_BUSY: MOV P0,#0FFH ;測忙碌子程序 CLR RS SETB RW SETB E JB P0.7,$ CLR E RET ;================================================ ;延時子程序 DELAY3: MOV R5,#16H DEL31: MOV R6,#100 DEL32: MOV R7,#0FFH DEL33: DJNZ R7,DEL33 DJNZ R6,DEL32 DJNZ R5,DEL31 RET DELAY2: MOV R6,#0CH DEL21: MOV R7,#18H DEL22: DJNZ R7,DEL22 DJNZ R6,DEL21 RET DELAY1: MOV R6,#06H DEL11: MOV R7,#08H DEL12: DJNZ R7,DEL12 DJNZ R6,DEL11 RET DELAY4: MOV R6,#100 DEL41: MOV R7,#200 DEL42: DJNZ R7,DEL42 DJNZ R6,DEL41 RET DELAY5: MOV R5,#05H DEL51: MOV R6,#100 DEL52: MOV R7,#0FFH DEL53: DJNZ R7,DEL53 DJNZ R6,DEL52 DJNZ R5,DEL51 RET ;*********************************************** TAB1: TAB1A: DB ' 51單片機學習網（深圳學林電子有限公司） ' ;顯示在第一行 TAB1C: DB '自學單片機第一站' ;顯示在第三行 TAB1B: DB ' WWW.8951.COM ' ;顯示在第二行 TAB1D: DB 'TEL 755-89956892' ;顯示在第四行 ;*-------------------------------------------------------------------- * ;* Bitmap點陣數據表 * ;* 圖片: E:\圖形8.bmp,橫向取模左高位,數據排列:從左到右從上到下 * ;* 圖片尺寸: 128 * 64 * ;*-------------------------------------------------------------------- * TU_TAB1: ; 數據表 db 0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh db 80h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h db 80h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h db 80h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h db 80h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h db 80h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h db 80h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h db 80h, 00h, 00h, 00h, 00h, 3Ch, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h db 80h, 00h, 00h, 00h, 00h, 7Fh, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h db 80h, 00h, 00h, 00h, 00h,0FFh,0C0h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h db 80h, 00h, 00h, 00h, 01h,0BFh,0F8h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h db 80h, 00h, 00h, 00h, 01h,0FFh,0DCh, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h db 80h, 00h, 00h, 00h, 01h, 1Fh,0FEh, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h db 80h, 00h, 00h, 00h, 01h,0DFh,0FFh, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h db 80h, 00h, 00h, 00h, 00h,0FFh,0FFh, 19h, 8Ch, 03h, 06h, 00h, 18h, 00h,0FFh,0E1h db 80h, 00h, 00h, 00h, 00h, 3Fh,0FFh, 0Ch,0CCh, 03h, 06h, 00h, 18h, 00h,0FFh,0E1h db 80h, 00h, 00h, 00h, 00h, 7Fh,0FFh, 04h, 58h, 03h, 06h, 01h,0FFh,0C0h, 00h,0C1h db 80h, 00h, 00h, 00h, 00h, 7Fh,0DAh, 3Fh,0FEh, 0Fh,0DFh,0C1h,0FFh,0C0h, 01h, 81h db 80h, 00h, 00h, 00h, 00h, 7Fh, 8Ch, 3Fh,0FEh, 0Fh,0DFh,0C1h, 98h,0C0h, 07h, 01h db 80h, 00h, 00h, 00h, 00h, 7Fh,0B8h, 30h, 06h, 03h, 06h, 01h, 98h,0C0h, 06h, 01h db 80h, 00h, 00h, 00h, 00h,0FEh,0C0h, 0Fh,0F8h, 03h, 8Eh, 01h,0FFh,0C3h,0FFh,0F9h db 80h, 00h, 00h, 00h, 00h, 7Eh, 00h, 0Fh,0F8h, 07h,0CFh, 01h, 98h,0C3h,0FFh,0F9h db 80h, 00h, 00h, 00h, 00h, 7Fh, 00h, 00h, 60h, 07h, 5Fh, 81h, 98h,0C0h, 06h, 01h db 80h, 00h, 00h, 00h, 00h, 7Fh, 80h, 3Fh,0FEh, 0Fh, 36h,0C1h,0FFh,0C0h, 06h, 01h db 80h, 00h, 00h, 00h, 00h, 1Fh, 80h,0BFh,0FEh, 0Bh, 36h, 61h,0FFh,0C0h, 06h, 01h db 80h, 00h, 00h, 00h, 00h, 1Fh,0C7h, 00h,0C0h, 03h, 66h, 21h, 98h, 30h, 06h, 01h db 80h, 00h, 00h, 00h, 15h, 5Fh,0C7h, 00h,0C0h, 03h, 06h, 00h, 18h, 30h, 06h, 01h db 80h, 00h, 02h,0E0h, 06h, 7Fh,0CEh, 03h,0C0h, 03h, 06h, 00h, 1Fh,0F0h, 1Eh, 01h db 80h, 00h, 04h, 54h, 4Fh,0FFh,0FCh, 01h, 80h, 03h, 06h, 00h, 0Fh,0E0h, 0Ch, 01h db 80h, 00h, 03h,0FDh, 3Fh,0FFh,0D9h,0C0h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h db 80h, 00h, 1Dh,0FFh,0FFh,0FFh, 87h, 80h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h db 80h, 00h, 2Bh,0FFh,0F8h, 7Fh, 06h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h db 80h, 00h, 3Fh,0BFh,0F8h, 09h, 0Fh, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h db 80h, 00h, 1Fh, 9Fh,0F0h, 00h,0BCh, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h db 9Dh,0FEh, 1Fh, 8Fh,0F0h, 00h,0F8h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h db 9Fh,0FCh, 17h, 8Fh,0F0h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h db 81h,0FFh,0CFh, 9Fh,0E0h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h db 82h,0FFh,0FFh, 9Ch, 80h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h db 81h, 7Fh,0FFh,0FCh, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h db 80h, 6Fh,0FEh, 30h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h db 80h, 03h,0FCh, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h db 80h, 00h, 34h, 14h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h db 80h, 00h, 0Eh, 18h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h db 80h, 00h, 02h, 30h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h db 80h, 00h, 01h,0E0h, 00h, 00h, 7Fh, 04h, 00h, 3Fh, 82h, 00h, 00h, 00h, 00h, 01h db 80h, 00h, 00h, 00h, 00h, 00h, 7Fh, 0Ch, 00h, 3Fh, 86h, 00h, 00h, 00h, 00h, 01h db 80h, 00h, 00h, 00h, 00h, 00h, 7Fh, 1Ch, 00h, 3Fh, 8Eh, 00h, 00h, 00h, 00h, 01h db 83h,0BBh, 9Dh,0DCh,0EEh,0E0h, 70h, 7Ch, 38h, 38h, 3Eh, 00h,0E0h, 38h, 3Bh, 31h db 83h,0BBh, 9Dh,0DCh,0EEh,0E0h, 70h, 7Ch, 3Ch, 38h, 3Eh, 00h,0F0h, 7Ch, 3Fh,0F9h db 83h,0BBh, 9Dh,0DCh,0EEh,0E0h, 76h, 1Ch, 7Eh, 3Bh, 0Eh, 01h,0F8h,0FEh, 3Fh,0F9h db 83h,0BBh, 9Dh,0DCh,0EEh,0E0h, 7Fh, 1Ch, 76h, 3Fh, 8Eh, 01h,0D8h,0EEh, 3Bh,0B9h db 83h,0BBh, 9Dh,0DCh,0EEh,0E0h, 7Fh, 1Ch, 76h, 3Fh, 8Eh, 01h,0D8h,0EEh, 3Bh,0B9h db 83h,0BBh, 9Dh,0DCh,0EEh,0E0h, 77h, 1Ch, 76h, 3Bh, 8Eh, 01h,0D8h,0EEh, 3Bh,0B9h db 81h,0BBh, 0Dh,0D8h, 6Eh,0C0h, 07h, 1Ch, 70h, 03h, 8Eh, 01h,0C0h,0EEh, 3Bh,0B9h db 81h,0ABh, 0Dh, 58h, 6Ah,0C0h, 07h, 1Ch, 70h, 03h, 8Eh, 01h,0C0h,0EEh, 3Bh,0B9h db 81h,0ABh, 0Dh, 58h, 6Ah,0C0h, 77h, 1Ch, 70h, 3Bh, 8Eh, 01h,0C0h,0EEh, 3Bh,0B9h db 81h,0ABh, 0Dh, 58h, 6Ah,0C0h, 77h, 1Ch, 76h, 3Bh, 8Eh, 01h,0D8h,0EEh, 3Bh,0B9h db 81h,0EFh, 0Fh, 78h, 7Bh,0C0h, 77h, 1Ch, 76h, 3Bh, 8Eh, 01h,0D8h,0EEh, 3Bh,0B9h db 81h,0EFh, 0Fh, 78h, 7Bh,0DCh, 77h, 1Ch, 76h, 3Bh, 8Eh, 39h,0D8h,0EEh, 3Bh,0B9h db 81h,0EFh, 0Fh, 78h, 7Bh,0DCh, 7Fh, 1Ch, 7Eh, 3Fh, 8Eh, 39h,0F8h,0FEh, 3Bh,0B9h db 81h,0EFh, 0Fh, 78h, 7Bh,0DCh, 3Eh, 1Ch, 3Ch, 1Fh, 0Eh, 38h,0F0h, 7Ch, 3Bh,0B9h db 81h,0EFh, 0Fh, 78h, 7Bh,0DCh, 1Ch, 1Ch, 3Ch, 0Eh, 0Eh, 38h,0F0h, 78h, 3Bh,0B9h db 80h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h db0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh ;*-------------------------------------------------------------------- * ;* Bitmap點陣數據表 * ;* 圖片: E:\圖形12.bmp,橫向取模左高位,數據排列:從左到右從上到下 * ;* 圖片尺寸: 128 * 64 * ;*-------------------------------------------------------------------- * TU_TAB2: ; 數據表 db 40h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 03h, 65h,0E8h, 80h, 00h, 01h db 9Ah,0D6h,0B4h, 42h, 00h, 00h, 00h, 00h, 00h, 00h, 34h,0DAh,0D0h, 00h, 00h, 01h db0A4h, 00h, 02h, 10h, 6Bh, 30h, 00h, 00h, 00h, 00h, 8Bh,0FFh, 30h, 00h, 00h, 01h db 42h,0D6h,0B0h, 42h, 80h, 00h, 00h, 00h, 00h, 16h, 77h,0FEh,0C0h, 00h, 00h, 01h db 42h,0D6h,0B0h, 42h, 80h, 00h, 00h, 00h, 00h, 16h, 77h,0FEh,0C0h, 00h, 00h, 01h db0B9h, 20h, 04h, 00h, 00h, 02h, 10h, 00h, 00h, 00h,0BCh,0BCh, 00h, 00h, 00h, 01h db 46h,0D6h,0B1h,0ACh, 6Bh, 30h, 00h, 00h, 02h, 29h,0CBh, 40h, 00h, 00h, 00h, 01h db0FFh,0F9h, 04h, 01h, 00h, 00h, 00h, 00h, 01h, 16h,0B4h,0A0h, 00h, 00h, 00h, 01h db0FFh,0FFh,0F2h, 50h, 00h, 40h, 00h, 00h, 00h, 29h, 4Bh, 00h, 00h, 00h, 00h, 01h db0FFh,0FFh,0F2h, 50h, 00h, 40h, 00h, 00h, 00h, 29h, 4Bh, 00h, 00h, 00h, 00h, 01h db0FFh,0FFh,0BDh, 82h, 94h, 00h, 40h, 00h, 00h,0C9h, 30h, 02h, 00h, 00h, 00h, 01h db0FFh,0FFh,0FBh,0B0h, 00h, 08h, 00h, 00h, 05h, 16h, 44h, 40h, 00h, 00h, 00h, 01h db0FFh,0FFh,0FFh,0EFh, 90h, 40h, 00h, 00h, 00h, 21h, 00h, 04h,0C8h, 30h, 00h, 01h db0A5h,0FFh,0FFh,0FDh, 6Bh, 00h, 00h, 00h, 00h,0C8h, 00h, 99h, 16h,0FAh, 40h, 01h db0A5h,0FFh,0FFh,0FDh, 6Bh, 00h, 00h, 00h, 00h,0C8h, 00h, 99h, 16h,0FAh, 40h, 01h db 82h, 2Fh,0FFh,0FFh,0E8h, 84h, 00h, 00h, 00h, 00h, 08h, 00h,0DFh,0FFh,0ECh, 01h db 24h,0C1h, 7Fh,0FFh,0F4h, 30h, 00h, 00h, 00h, 00h, 00h,0A7h,0FFh,0FFh,0FCh, 01h db 42h, 28h, 05h,0BFh,0FBh, 80h, 00h, 00h, 00h, 00h, 04h, 1Bh,0FFh,0FFh,0FFh, 81h db 98h,0C1h, 4Ah, 53h,0ECh, 48h, 00h, 00h, 00h, 00h, 40h, 7Fh,0FFh,0FFh,0FFh,0E1h db 98h,0C1h, 4Ah, 53h,0ECh, 48h, 00h, 00h, 00h, 00h, 40h, 7Fh,0FFh,0FFh,0FFh,0E1h db 42h, 28h, 00h, 0Ch, 77h, 82h, 00h, 00h, 00h, 00h, 33h,0BFh,0FFh,0FFh,0FFh, 89h db 18h,0C1h, 4Ah, 51h, 9Bh, 74h, 00h, 00h, 00h, 00h, 04h,0FFh, 3Fh,0FFh,0DFh,0F1h db0C2h, 28h, 00h, 0Ch, 04h, 80h, 00h, 00h, 00h, 00h, 40h,0FEh, 1Fh,0F9h,0C3h,0F9h db 1Ah,0D6h,0B5h,0A1h, 6Bh, 75h, 80h, 00h, 00h, 00h, 8Fh,0FCh, 3Fh,0F2h, 0Fh, 1Fh db 1Ah,0D6h,0B5h,0A1h, 6Bh, 75h, 80h, 00h, 00h, 00h, 8Fh,0FCh, 3Fh,0F2h, 0Fh, 1Fh db0C5h, 29h, 79h, 8Ch, 00h, 88h, 00h, 00h, 00h, 00h, 03h,0F8h, 1Fh,0C8h, 52h, 81h db 22h,0FFh,0FFh,0F2h, 6Bh, 35h, 80h, 00h, 00h, 00h, 37h,0C2h, 3Fh,0FBh,0FCh, 09h db 9Ah,0FFh,0FFh,0FFh, 00h, 48h, 00h, 00h, 00h, 00h, 07h,0D8h, 1Fh,0FFh,0E3h, 81h db 9Ah,0FFh,0FFh,0FFh, 00h, 48h, 00h, 00h, 00h, 00h, 07h,0D8h, 1Fh,0FFh,0E3h, 81h db 47h,0FFh,0FFh,0FFh,0F3h, 35h, 80h, 00h, 00h, 00h, 8Fh,0C1h, 0Fh,0FFh,0ACh, 01h db0B9h,0FFh,0FFh,0FFh,0FCh, 4Ah, 20h, 00h, 00h, 00h, 0Fh,0A4h, 07h,0FEh, 40h, 01h db 5Fh,0FFh,0C7h,0FFh,0FCh,0B5h, 80h, 00h, 00h, 00h, 4Fh,0DAh,0FFh,0F8h, 00h, 01h db0A7h,0FFh,0B7h,0FFh,0FFh, 8Ah, 20h, 00h, 00h, 00h, 0Fh,0FFh,0EFh, 40h, 00h, 01h db0A7h,0FFh,0B7h,0FFh,0FFh, 8Ah, 20h, 00h, 00h, 00h, 0Fh,0FFh,0EFh, 40h, 00h, 01h db 7Fh,0FFh, 47h,0FDh, 7Fh,0C5h, 80h, 00h, 00h, 00h, 3Fh,0DAh,0D0h, 00h, 00h, 01h db0A7h,0FEh, 37h,0FFh, 7Ch,0FAh, 50h, 00h, 00h, 00h, 0Ch,0A4h, 08h, 00h, 00h, 01h db0DFh,0FEh, 43h,0FFh,0F8h,0C1h, 80h, 00h, 00h, 00h, 48h, 01h, 00h, 00h, 00h, 01h db 27h,0FFh, 4Bh,0FFh,0FFh,0FAh, 2Ch, 00h, 00h, 00h, 03h, 58h, 20h, 00h, 00h, 01h db 27h,0FFh, 4Bh,0FFh,0FFh,0FAh, 2Ch, 00h, 00h, 00h, 03h, 58h, 20h, 00h, 00h, 01h db 9Bh,0FFh,0C3h,0FFh,0FFh,0F1h,0C0h, 00h, 00h, 00h, 08h, 00h, 00h, 00h, 00h, 01h db 64h, 3Fh,0FDh,0FFh, 6Bh, 7Ch, 10h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h db 03h,0D7h,0FFh,0FDh, 10h, 01h,0A0h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h db0D8h, 29h, 4Fh,0A2h, 80h,0B5h, 90h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h db0D8h, 29h, 4Fh,0A2h, 80h,0B5h, 90h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h db 05h, 10h,0B0h, 4Ch, 0Bh, 08h, 40h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h db0A0h,0C9h, 0Ah, 00h, 00h, 42h, 10h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h db 04h, 10h, 40h, 21h, 64h, 09h,0A0h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h db0A2h,0C1h, 35h, 8Ch, 00h, 44h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h db0A2h,0C1h, 35h, 8Ch, 00h, 44h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h db 00h, 16h, 00h, 21h, 14h, 09h,0A0h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h db0A5h, 00h,0B5h, 80h, 83h, 44h, 0Ch, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h db 00h, 26h, 00h, 12h, 08h, 09h,0A0h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h db0DAh, 00h,0B4h, 40h, 60h, 44h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h db0DAh, 00h,0B4h, 40h, 60h, 44h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h db 80h,0C8h, 00h, 00h, 04h, 01h,0A0h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h db0A2h, 20h, 89h, 91h, 10h, 8Ah, 10h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h db 44h, 06h, 00h, 00h, 00h, 30h, 40h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h db 44h, 06h, 00h, 00h, 00h, 30h, 40h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h db 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h db 80h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h db 80h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h db 80h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h db 80h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h db0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh ;*-------------------------------------------------------------------- * ;*-------------------------------------------------------------------- * ;* Bitmap點陣數據表 * ;* 圖片: E:\圖形13.bmp,橫向取模左高位,數據排列:從左到右從上到下 * ;* 圖片尺寸: 128 * 64 * ;*-------------------------------------------------------------------- * TU_TAB4: ; 漂亮姑娘看過來 db 0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh db 80h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h db 80h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h db 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h db 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h db 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h db 00h, 00h, 00h, 00h, 00h, 00h, 00h, 11h,0FFh, 80h, 40h, 08h, 30h, 10h, 20h, 00h db 00h, 00h, 00h, 00h, 00h, 00h, 00h, 0Ch, 68h, 3Fh,0FFh, 08h, 30h, 11h,0F8h, 00h db 00h, 00h, 00h, 00h, 00h, 00h, 00h, 0Ch, 68h, 3Fh,0FFh, 08h, 30h, 11h,0F8h, 00h db 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h,0FFh, 00h, 00h, 7Fh,0FEh, 7Dh, 08h, 00h db 00h, 00h, 00h, 00h, 00h, 00h, 00h, 11h, 6Bh, 07h,0FCh, 16h, 30h, 2Dh,0F8h, 00h db 00h, 00h, 00h, 00h, 00h, 00h, 00h, 0Dh,0FFh, 04h, 0Ch, 16h, 30h, 2Dh, 08h, 00h db 00h, 00h, 00h, 00h, 00h, 00h, 00h, 0Ch, 00h, 3Fh,0FFh, 16h, 30h, 2Dh,0F8h, 00h db 00h, 00h, 00h, 00h, 00h, 00h, 00h, 0Ch, 00h, 3Fh,0FFh, 16h, 30h, 2Dh,0F8h, 00h db 00h, 00h, 00h, 00h, 00h, 00h, 00h, 0Ch,0FFh, 30h, 01h, 66h,0FEh, 2Dh, 26h, 00h db 00h, 00h, 00h, 00h, 00h, 00h, 00h, 1Ch, 00h, 03h,0F0h, 76h, 82h, 2Dh, 28h, 00h db 00h, 00h, 00h, 00h, 00h, 00h, 00h, 0Dh,0FFh, 82h, 11h, 08h, 82h, 11h, 10h, 00h db 00h, 00h, 00h, 00h, 00h, 00h, 00h, 0Ch, 8Bh, 04h, 11h, 16h, 82h, 2Dh, 28h, 00h db 00h, 00h, 00h, 00h, 00h, 00h, 00h, 0Ch, 8Bh, 04h, 11h, 16h, 82h, 2Dh, 28h, 00h db 00h, 00h, 00h, 00h, 00h, 00h, 00h, 0Dh, 18h,0B8h, 1Fh, 60h,0FEh, 41h,0C6h, 00h db 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h db 00h, 07h, 8Fh,0FFh, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h db 00h, 08h, 70h, 40h,0EFh, 80h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h db 00h, 08h, 70h, 40h,0EFh, 80h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h db 00h, 10h, 00h, 80h, 10h, 60h, 00h, 0Fh,0FFh, 30h, 0Ch, 00h, 80h, 00h, 00h, 00h db 00h, 20h, 18h, 38h, 20h, 60h, 00h, 00h, 60h, 08h, 0Ch, 1Fh,0FCh, 1Ch, 00h, 00h db 00h,0C0h, 64h, 45h, 00h, 60h, 00h, 03h,0FCh, 0Bh,0FFh, 00h, 80h, 3Eh, 00h, 00h db 00h,0C1h, 00h, 01h, 00h, 10h, 00h, 00h, 80h, 00h, 0Ch, 08h, 88h, 3Eh, 00h, 00h db 00h,0C1h, 00h, 01h, 00h, 10h, 00h, 00h, 80h, 00h, 0Ch, 08h, 88h, 3Eh, 00h, 00h db 01h, 01h, 00h, 00h,0C0h, 10h, 00h, 1Fh,0FFh,0BDh, 8Ch, 06h,0B0h, 3Eh, 00h, 00h db 02h, 0Eh, 18h, 1Ch,0C0h, 10h, 00h, 01h, 00h, 04h, 4Ch, 7Fh,0FEh, 1Ch, 00h, 00h db 02h, 16h, 64h, 22h, 20h, 10h, 00h, 03h,0FCh, 04h, 4Ch, 01h,0C0h, 1Ch, 00h, 00h db 02h, 16h, 64h, 22h, 20h, 10h, 00h, 03h,0FCh, 04h, 4Ch, 01h,0C0h, 1Ch, 00h, 00h db 04h,0E8h, 83h, 41h, 1Ch, 08h, 00h, 0Dh, 04h, 04h, 0Ch, 06h,0B0h, 00h, 00h, 00h db 07h, 10h, 8Fh, 47h, 03h, 88h, 00h, 11h,0FCh, 04h, 3Ch, 08h, 88h, 1Ch, 00h, 00h db 00h, 20h, 6Ch, 26h, 01h, 78h, 00h, 01h, 04h, 0Ah, 00h, 70h, 86h, 1Ch, 00h, 00h db 00h,0C0h, 18h, 1Ch, 00h, 80h, 00h, 01h,0FCh, 31h,0FFh, 00h, 80h, 00h, 00h, 00h db 00h,0C0h, 18h, 1Ch, 00h, 80h, 00h, 01h,0FCh, 31h,0FFh, 00h, 80h, 00h, 00h, 00h db 00h,0C1h, 87h, 80h, 00h, 80h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h db 01h, 06h, 78h, 3Ch, 20h, 60h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h db 01h, 08h, 07h,0C2h,0C0h, 60h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h db 01h, 08h, 00h, 01h,0C0h, 60h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h db 01h, 08h, 00h, 01h,0C0h, 60h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h db 01h, 08h, 18h, 01h,0C0h, 60h, 00h, 00h, 00h,0F1h,0F3h, 87h,0C0h, 00h, 00h, 00h db 00h,0C6h, 18h,0C2h, 20h, 80h, 00h, 00h, 03h, 0Eh, 1Ch, 78h, 70h, 00h, 00h, 00h db 00h,0C1h, 00h,0C2h, 00h, 80h, 00h, 00h, 04h, 44h, 11h, 10h, 38h, 00h, 00h, 00h db 00h, 26h,0E0h, 04h, 01h, 00h, 00h, 00h, 04h, 80h, 12h, 00h, 38h, 00h, 00h, 00h db 00h, 26h,0E0h, 04h, 01h, 00h, 00h, 00h, 04h, 80h, 12h, 00h, 38h, 00h, 00h, 00h db 00h, 11h, 18h, 38h, 03h, 00h, 00h, 00h, 04h, 80h, 12h, 00h, 38h, 00h, 00h, 00h db 00h, 0Eh, 87h,0C2h, 1Ch, 00h, 00h, 00h, 04h, 00h, 10h, 00h, 38h, 00h, 00h, 00h db 00h, 01h,0E0h, 04h,0E0h, 00h, 00h, 00h, 03h, 00h, 1Ch, 00h, 70h, 00h, 00h, 00h db 00h, 1Eh, 18h, 3Fh, 1Eh, 00h, 00h, 00h, 00h, 80h, 32h, 00h,0C0h, 00h, 00h, 00h db 00h, 1Eh, 18h, 3Fh, 1Eh, 00h, 00h, 00h, 00h, 80h, 32h, 00h,0C0h, 00h, 00h, 00h db 00h, 38h, 07h,0C0h, 0Fh, 00h, 00h, 00h, 00h, 40h, 61h, 01h, 80h, 00h, 00h, 00h db 00h,0E9h,0FFh,0FFh, 0Dh, 80h, 00h, 00h, 00h, 31h,0C0h, 87h, 00h, 00h, 00h, 00h db 01h,0E9h, 1Bh,0B9h, 0Dh,0E0h, 00h, 00h, 00h, 0Bh, 80h, 6Eh, 00h, 00h, 00h, 00h db 03h,0C9h,0F0h, 1Fh, 0Ch,0F0h, 00h, 00h, 00h, 06h, 00h, 18h, 00h, 00h, 00h, 00h db 03h,0C9h,0F0h, 1Fh, 0Ch,0F0h, 00h, 00h, 00h, 06h, 00h, 18h, 00h, 00h, 00h, 00h db 07h, 06h,0E0h, 06h, 10h, 78h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h db 07h,0C1h, 00h, 00h, 20h,0F8h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h db 07h,0E0h, 80h, 00h,0C1h,0F8h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h db 07h,0E0h, 80h, 00h,0C1h,0F8h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h db 80h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 00h, 01h db0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh end
上傳時間： 2013-10-13
上傳用戶：123啊
摘要：介紹一種采用單片機控制的小功率DC/AC逆變電源，直流升壓控制部分采用電流型控制芯片UC3846，該控制方案能顯著地抑制推挽變壓器的磁偏，同時提高負載的動態響應速度。
上傳時間： 2013-10-08
上傳用戶：sun_pro12580
Q1：請介紹一下MCU的測試方法。A1：MCU從生產出來到封裝出貨的每個不同的階段會有不同的測試方法，其中主要會有兩種：中測和成測。所謂中測即是WAFER的測試，它會包含產品的功能驗證及AC、DC的測試。項目相當繁多，以HOLTEK產品為例最主要的幾項如下：......
上傳時間： 2013-11-08
上傳用戶：330402686
采用納瓦技術的8/14引腳閃存8位CMOS單片機 PIC12F635/PIC16F636/639數據手冊 目錄1.0 器件概述 2.0 存儲器構成3.0 時鐘源4.0 I/O 端口 5.0 Timer0 模塊6.0 具備門控功能的Timer1 模塊 7.0 比較器模塊8.0 可編程低壓檢測（PLVD）模塊9.0 數據EEPROM 存儲器10.0 KeeLoq® 兼容加密模塊 11.0 模擬前端（AFE）功能說明 （僅限PIC16F639）12.0 CPU 的特殊功能13.0 指令集概述14.0 開發支持15.0 電氣特性16.0 DC 和AC 特性圖表17.0 封裝信息Microchip 網站變更通知客戶服務客戶支持讀者反饋表 附錄A： 數據手冊版本歷史產品標識體系全球銷售及服務網點
上傳時間： 2013-11-17
上傳用戶：qlpqlq
6引腳8位閃存單片機 PIC10F200/202/204/206數據手冊 目錄1.0 器件概述2.0 PIC10F200/202/204/206 器件種類3.0 架構概述4.0 存儲器構成5.0 I/O 端口6.0 Timer0 模塊和TMR0 寄存器（PIC10F200/202）7.0 Timer0 模塊和TMR0 寄存器（PIC10F204/206）8.0 比較器模塊9.0 CPU 的特性10.0 指令集匯總11.0 開發支持 12.0 電氣規范 13.0 DC 及AC 特性圖表14.0 封裝信息 索引 客戶支持 變更通知客戶服務 讀者反饋表 產品標識體系
上傳時間： 2013-10-09
上傳用戶：chenhr
本文著重介紹高效低紋波DC-DC降壓穩壓器SCY99090的特性、典型應用電路、電路中元器件的選型以及PCB的布局。
上傳時間： 2013-10-15
上傳用戶：hustfanenze
PIC系列單片機手冊 第1 章 簡介 1-1簡介 ................................................................................................................................................................. 1-2本手冊的宗旨 ................................................................................................................................................... 1-3器件結構 .......................................................................................................................................................... 1-4開發支持 .......................................................................................................................................................... 1-6器件種類 .......................................................................................................................................................... 1-7格式和符號的約定 ......................................................................................................................................... 1-12相關文檔 ........................................................................................................................................................ 1-14相關應用筆記 ................................................................................................................................................. 1-17版本歷史 ........................................................................................................................................................ 1-18第2 章 振蕩器 2-1簡介 ................................................................................................................................................................. 2-2振蕩器配置 ...................................................................................................................................................... 2-2晶體振蕩器 / 陶瓷諧振器 ................................................................................................................................. 2-4外部RC 振蕩器 ............................................................................................................................................. 2-124MHz 內部 RC 振蕩器 ................................................................................................................................... 2-13休眠模式對片內振蕩器的影響 ........................................................................................................................ 2-17器件復位對片內振蕩器的影響 ........................................................................................................................ 2-17設計技巧 ........................................................................................................................................................ 2-18相關應用筆記 ................................................................................................................................................. 2-19版本歷史 ........................................................................................................................................................ 2-20第3 章 復位 3-1簡介 ................................................................................................................................................................. 3-2上電復位、上電延時定時器、 起振定時器、欠壓復位和奇偶校驗錯誤復位 ...................................................... 3-4寄存器和狀態位的值 ...................................................................................................................................... 3-10設計技巧 ........................................................................................................................................................ 3-16相關應用筆記 ................................................................................................................................................. 3-17版本歷史 ........................................................................................................................................................ 3-18 第4 章 架構 4-1簡介 ................................................................................................................................................................. 4-2時序圖/ 指令周期 ............................................................................................................................................ 4-5指令流/ 流水線 ................................................................................................................................................ 4-6I/O 端口描述 .................................................................................................................................................... 4-7設計技巧 ........................................................................................................................................................ 4-12相關應用筆記 ................................................................................................................................................. 4-13版本歷史 ........................................................................................................................................................ 4-14 第5 章 CPU 和ALU 5-1簡介 ................................................................................................................................................................. 5-2指令的一般格式 ............................................................................................................................................... 5-4中央處理單元（CPU） .................................................................................................................................... 5-4指令時鐘 .......................................................................................................................................................... 5-4算術邏輯單元（ALU） .................................................................................................................................... 5-5狀態寄存器 ...................................................................................................................................................... 5-6OPTION_REG 寄存器 ..................................................................................................................................... 5-8電源控制寄存器 ............................................................................................................................................... 5-9設計技巧 ........................................................................................................................................................ 5-10相關應用筆記 ................................................................................................................................................. 5-11版本歷史 ........................................................................................................................................................ 5-12第6 章 存儲器構成 6-1簡介 ................................................................................................................................................................. 6-2程序存儲器構成 ............................................................................................................................................... 6-2數據存儲器構成 ............................................................................................................................................... 6-8初始化 ........................................................................................................................................................... 6-14設計技巧 ........................................................................................................................................................ 6-16相關應用筆記 ................................................................................................................................................. 6-17版本歷史 ........................................................................................................................................................ 6-18第7 章 數據EEPROM 7-1簡介 ................................................................................................................................................................. 7-2控制寄存器 ...................................................................................................................................................... 7-3EEADR ............................................................................................................................................................ 7-4EECON1 和EECON2 寄存器 .......................................................................................................................... 7-4從EEPROM 數據存儲器中讀數據 .................................................................................................................... 7-5向EEPROM 數據存儲器中寫數據 .................................................................................................................... 7-5寫校驗 ............................................................................................................................................................. 7-6誤寫操作保護 ................................................................................................................................................... 7-7代碼保護配置下的數據EEPROM 操作 ............................................................................................................. 7-7初始化 ............................................................................................................................................................. 7-7設計技巧 .......................................................................................................................................................... 7-8相關應用筆記 ................................................................................................................................................... 7-9版本歷史 ........................................................................................................................................................ 7-10第8 章 中斷 8-1簡介 ................................................................................................................................................................. 8-2控制寄存器 ...................................................................................................................................................... 8-5中斷響應延時 ................................................................................................................................................. 8-10INT 和外部中斷 .............................................................................................................................................. 8-10中斷的現場保護 ............................................................................................................................................. 8-11初始化 ........................................................................................................................................................... 8-14設計技巧 ........................................................................................................................................................ 8-16相關應用筆記 ................................................................................................................................................. 8-17版本歷史 ........................................................................................................................................................ 8-18第9 章 I/O 端口 9-1簡介 ................................................................................................................................................................. 9-2PORTA 和TRISA 寄存器 ................................................................................................................................ 9-4PORTB 和TRISB 寄存器 ................................................................................................................................ 9-6PORTC 和TRISC 寄存器 ................................................................................................................................ 9-8PORTD 和TRISD 寄存器 ................................................................................................................................ 9-9PORTE 和TRISE 寄存器 ............................................................................................................................... 9-10PORTF 和 TRISF 寄存器 ............................................................................................................................... 9-11PORTG 和TRISG 寄存器 .............................................................................................................................. 9-12GPIO 和TRISGP 寄存器 ............................................................................................................................... 9-13I/O 編程注意事項 ........................................................................................................................................... 9-14初始化 ........................................................................................................................................................... 9-16設計技巧 ........................................................................................................................................................ 9-17相關應用筆記 ................................................................................................................................................. 9-19版本歷史 ........................................................................................................................................................ 9-20第10 章 并行從動端口 10-1簡介 ............................................................................................................................................................... 10-2控制寄存器 .................................................................................................................................................... 10-3操作 ............................................................................................................................................................... 10-4休眠模式下的操作 ......................................................................................................................................... 10-5復位的影響 .................................................................................................................................................... 10-5PSP 波形 ....................................................................................................................................................... 10-5設計技巧 ........................................................................................................................................................ 10-6相關應用筆記 ................................................................................................................................................. 10-7版本歷史 ........................................................................................................................................................ 10-8 第11 章 TIMER0 11-1簡介 ............................................................................................................................................................... 11-2控制寄存器 .................................................................................................................................................... 11-3操作 ............................................................................................................................................................... 11-4TMR0 中斷 .................................................................................................................................................... 11-5Timer0 外部時鐘的使用 ................................................................................................................................. 11-6TMR0 的預分頻器 ......................................................................................................................................... 11-7設計技巧 ...................................................................................................................................................... 11-10相關應用筆記 ............................................................................................................................................... 11-11版本歷史 ...................................................................................................................................................... 11-12第12 章 TIMER1 12-1簡介 ............................................................................................................................................................... 12-2控制寄存器 .................................................................................................................................................... 12-3Timer1 工作在定時器模式 ..............................................................................................................................12-4Timer1 工作在同步計數器模式 ....................................................................................................................... 12-4Timer1 工作在異步計數器模式 ....................................................................................................................... 12-5Timer1 振蕩器 ............................................................................................................................................... 12-7休眠操作 ........................................................................................................................................................ 12-9用CCP 觸發器的輸出將Timer1 復位 ............................................................................................................. 12-9Timer1 寄存器（TMR1H:TMR1L）的復位 .................................................................................................... 12-9Timer1 預分頻器 ............................................................................................................................................ 12-9初始化 ......................................................................................................................................................... 12-10設計技巧 ...................................................................................................................................................... 12-12相關應用筆記 ............................................................................................................................................... 12-13版本歷史 ...................................................................................................................................................... 12-14第13 章 TIMER2 13-1簡介 ............................................................................................................................................................... 13-2控制寄存器 .................................................................................................................................................... 13-3定時器時鐘源 ................................................................................................................................................. 13-4定時器TMR2 和PR2 周期寄存器 .................................................................................................................. 13-4TMR2 匹配輸出 ............................................................................................................................................. 13-4將Timer2 的預分頻器和后分頻器清零 ........................................................................................................... 13-4休眠操作 ........................................................................................................................................................ 13-4初始化 ........................................................................................................................................................... 13-5設計技巧 ........................................................................................................................................................ 13-6相關應用筆記 ................................................................................................................................................. 13-7版本歷史 ........................................................................................................................................................ 13-8第14 章 比較/ 捕捉/ 脈寬調制(CCP) 14-1簡介 ............................................................................................................................................................... 14-2控制寄存器 .................................................................................................................................................... 14-3捕捉模式 ........................................................................................................................................................ 14-4比較模式 ........................................................................................................................................................ 14-6PWM 模式 ..................................................................................................................................................... 14-8初始化 ......................................................................................................................................................... 14-12設計技巧 ...................................................................................................................................................... 14-15相關應用筆記 ............................................................................................................................................... 14-17版本歷史 ...................................................................................................................................................... 14-18第15 章 同步串行口（SSP） 15-1簡介 ............................................................................................................................................................... 15-2控制寄存器 .................................................................................................................................................... 15-3SPITM 模式 .................................................................................................................................................... 15-6SSP 模塊的I2CTM 操作 ............................................................................................................................... 15-16初始化 ......................................................................................................................................................... 15-26設計技巧 ...................................................................................................................................................... 15-28相關應用筆記 ............................................................................................................................................... 15-29版本歷史 ...................................................................................................................................................... 15-30第16 章 基本同步串行口（BSSP） 16-1簡介 ............................................................................................................................................................... 16-2控制寄存器 .................................................................................................................................................... 16-3SPITM 模式 .................................................................................................................................................... 16-6SSP 模塊 的I2CTM 操作 ............................................................................................................................... 16-15初始化 ......................................................................................................................................................... 16-23設計技巧 ...................................................................................................................................................... 16-24相關應用筆記 ............................................................................................................................................... 16-25版本歷史 ...................................................................................................................................................... 16-26第17 章 主同步串行口（MSSP） 17-1簡介 ............................................................................................................................................................... 17-2控制寄存器 .................................................................................................................................................... 17-4SPITM 模式 .................................................................................................................................................... 17-9SSP 模塊的 I2C™ 操作 ............................................................................................................................... 17-18I2CTM 總線的連接注意事項 ........................................................................................................................... 17-56初始化 ......................................................................................................................................................... 17-57設計技巧 ...................................................................................................................................................... 17-58相關應用筆記 ............................................................................................................................................... 17-59版本歷史 ...................................................................................................................................................... 17-60第18 章 USART 18-1簡介 ............................................................................................................................................................... 18-2控制寄存器 .................................................................................................................................................... 18-3USART 波特率發生器（BRG） ..................................................................................................................... 18-5USART 異步工作模式 ................................................................................................................................... 18-8USART 同步主控模式 .................................................................................................................................. 18-15USART 同步從動模式 ................................................................................................................................. 18-19初始化 ......................................................................................................................................................... 18-21設計技巧 ...................................................................................................................................................... 18-22相關應用筆記 ............................................................................................................................................... 18-23版本歷史 ...................................................................................................................................................... 18-24第19 章 參考電壓模塊 19-1簡介 ............................................................................................................................................................... 19-2控制寄存器 .................................................................................................................................................... 19-3配置參考電壓 ................................................................................................................................................. 19-4參考電壓精度 ................................................................................................................................................. 19-5休眠模式下的操作 ......................................................................................................................................... 19-5復位的影響 .................................................................................................................................................... 19-5連接注意事項 ................................................................................................................................................. 19-6初始化 ........................................................................................................................................................... 19-7設計技巧 ........................................................................................................................................................ 19-8相關應用筆記 ................................................................................................................................................. 19-9版本歷史 ...................................................................................................................................................... 19-10第20 章 比較器 20-1簡介 ............................................................................................................................................................... 20-2控制寄存器 .................................................................................................................................................... 20-3設置比較器模式 ............................................................................................................................................. 20-4比較器工作原理 ............................................................................................................................................. 20-6比較器參考源 ................................................................................................................................................. 20-6比較器的響應時間 ......................................................................................................................................... 20-8比較器輸出 .................................................................................................................................................... 20-8比較器中斷 .................................................................................................................................................... 20-9休眠狀態下比較器的操作 ............................................................................................................................... 20-9復位的影響 .................................................................................................................................................... 20-9模擬輸入連接方式注意事項 .......................................................................................................................... 20-10初始化 ......................................................................................................................................................... 20-11設計技巧 ...................................................................................................................................................... 20-12相關應用筆記 ............................................................................................................................................... 20-13版本歷史 ...................................................................................................................................................... 20-14第21 章 8 位A/D 轉換器 21-1簡介 ............................................................................................................................................................... 21-2控制寄存器 .................................................................................................................................................... 21-3操作 ............................................................................................................................................................... 21-5A/D 采集時間要求 .......................................................................................................................................... 21-6A/D 轉換時鐘的選擇 ...................................................................................................................................... 21-8配置模擬輸入端口 ......................................................................................................................................... 21-9A/D 轉換 ...................................................................................................................................................... 21-10休眠期間的A/D 轉換 ................................................................................................................................... 21-12A/D 精度/ 誤差 ............................................................................................................................................ 21-13復位對A/D 轉換的影響 ................................................................................................................................ 21-13CCP 觸發器的使用 ...................................................................................................................................... 21-14連接注意事項 ............................................................................................................................................... 21-14傳遞函數 ...................................................................................................................................................... 21-14初始化 ......................................................................................................................................................... 21-15設計技巧 ...................................................................................................................................................... 21-16相關應用筆記 ............................................................................................................................................... 21-17版本歷史 ...................................................................................................................................................... 21-18第22 章 基本型8 位A/D 轉換器 22-1簡介 ............................................................................................................................................................... 22-2控制寄存器 .................................................................................................................................................... 22-3A/D 采集時間要求 .......................................................................................................................................... 22-6A/D 轉換時鐘的選擇 ...................................................................................................................................... 22-8配置模擬輸入端口 ....................................................................................................................................... 22-10A/D 轉換 ...................................................................................................................................................... 22-11休眠期間的A/D 轉換 ................................................................................................................................... 22-14A/D 轉換精度/ 誤差 ..................................................................................................................................... 22-15復位對A/D 轉換的影響 ................................................................................................................................ 22-16連接時的考慮事項 ....................................................................................................................................... 22-16傳遞函數 ...................................................................................................................................................... 22-16初始化 ......................................................................................................................................................... 22-17設計技巧 ...................................................................................................................................................... 22-18相關應用筆記 ............................................................................................................................................... 22-19版本歷史 ...................................................................................................................................................... 22-20第23 章 10 位A/D 轉換器 23-1簡介 ............................................................................................................................................................... 23-2控制寄存器 .................................................................................................................................................... 23-3操作 ............................................................................................................................................................... 23-5A/D 采集時間要求 .......................................................................................................................................... 23-6A/D 轉換時鐘的選擇 ...................................................................................................................................... 23-8模擬輸入引腳的設置 ...................................................................................................................................... 23-9A/D 轉換的編程舉例 .................................................................................................................................... 23-10休眠期間的A/D 轉換 ................................................................................................................................... 23-14復位對A/D 轉換的影響 ................................................................................................................................ 23-14A/D 轉換精度與誤差 .................................................................................................................................... 23-15連接時的考慮事項 ....................................................................................................................................... 23-16傳遞函數 ...................................................................................................................................................... 23-16初始化 ......................................................................................................................................................... 23-17設計技巧 ...................................................................................................................................................... 23-18相關應用筆記 ............................................................................................................................................... 23-19版本歷史 ...................................................................................................................................................... 23-20第24 章 積分型A/D 轉換器 24-1簡介 ............................................................................................................................................................... 24-2控制寄存器 .................................................................................................................................................... 24-3轉換過程 ........................................................................................................................................................ 24-6其它模擬模塊 ............................................................................................................................................... 24-12校準參數 ...................................................................................................................................................... 24-13設計技巧 ...................................................................................................................................................... 24-14相關應用筆記 ............................................................................................................................................... 24-15版本歷史 ...................................................................................................................................................... 24-16第25 章 LCD 25-1簡介 ............................................................................................................................................................... 25-2控制寄存器 .................................................................................................................................................... 25-3LCD 定時 ....................................................................................................................................................... 25-6LCD 中斷 ..................................................................................................................................................... 25-12像素控制 ...................................................................................................................................................... 25-13電壓發生器 .................................................................................................................................................. 25-15休眠模式下的操作 ....................................................................................................................................... 25-16復位的影響 .................................................................................................................................................. 25-17LCD 模塊的設置 .......................................................................................................................................... 25-17判別比 ......................................................................................................................................................... 25-18LCD 電壓發生器 .......................................................................................................................................... 25-20對比度 ......................................................................................................................................................... 25-22LCD 玻璃基板 .............................................................................................................................................. 25-22初始化 ......................................................................................................................................................... 25-23設計技巧 ...................................................................................................................................................... 25-24相關應用筆記 ............................................................................................................................................... 25-25版本歷史 ...................................................................................................................................................... 25-26第26 章 看門狗定時器與休眠模式 26-1簡介 ............................................................................................................................................................... 26-2控制寄存器 .................................................................................................................................................... 26-3看門狗定時器（WDT）的操作 ....................................................................................................................... 26-4休眠省電模式 ................................................................................................................................................. 26-7初始化 ........................................................................................................................................................... 26-9設計技巧 ...................................................................................................................................................... 26-10相關應用筆記 ............................................................................................................................................... 26-11版本歷史 ...................................................................................................................................................... 26-12第27 章 器件配置位 27-1簡介 ............................................................................................................................................................... 27-2配置字位 ........................................................................................................................................................ 27-4編程校驗/ 代碼保護 ....................................................................................................................................... 27-8識別碼ID 的位置 ........................................................................................................................................... 27-9設計技巧 ...................................................................................................................................................... 27-10相關應用筆記 ............................................................................................................................................... 27-11版本歷史 ...................................................................................................................................................... 27-12第28 章 在線串行編程 28-1簡介 ............................................................................................................................................................... 28-2進入在線串行編程模式 .................................................................................................................................. 28-3應用電路 ........................................................................................................................................................ 28-4編程器 ........................................................................................................................................................... 28-6編程環境 ........................................................................................................................................................ 28-6其它優點 ........................................................................................................................................................ 28-7PICmicro® OTP 型單片機的現場編程 ............................................................................................................. 28-8FLASH 型 PICmicro® 單片機的現場編程 ...................................................................................................... 28-10設計技巧 ...................................................................................................................................................... 28-12相關應用筆記 ............................................................................................................................................... 28-13版本歷史 ...................................................................................................................................................... 28-14第29 章 指令集 29-1簡介 ............................................................................................................................................................... 29-2指令格式 ........................................................................................................................................................ 29-4作為源/ 目標寄存器的特殊功能寄存器 ........................................................................................................... 29-6Q 周期操作 .................................................................................................................................................... 29-7指令描述 ........................................................................................................................................................ 29-8設計技巧 ...................................................................................................................................................... 29-45相關應用筆記 ............................................................................................................................................... 29-47版本歷史 ...................................................................................................................................................... 29-48第30 章 電氣規范 30-1簡介 ............................................................................................................................................................... 30-2絕對最大值 .................................................................................................................................................... 30-3器件選型表 .................................................................................................................................................... 30-4器件電壓規范 ................................................................................................................................................. 30-5器件電流特性 ................................................................................................................................................. 30-6輸入閾值電平 ................................................................................................................................................. 30-9I/O 電流特性 ................................................................................................................................................ 30-10輸出驅動電壓 ............................................................................................................................................... 30-11I/O 引腳的容性負載 ..................................................................................................................................... 30-12數據EEPROM / 閃存 .................................................................................................................................. 30-13LCD ............................................................................................................................................................. 30-14比較器和參考電壓 ....................................................................................................................................... 30-15時序參數符號 ............................................................................................................................................... 30-16外部時鐘時序波形圖和時序要求示例 ............................................................................................................ 30-17上電和復位時序波形圖及要求示例 ............................................................................................................... 30-19定時器Timer0 和Timer1 時序波形圖及要求示例 ......................................................................................... 30-20CCP 的時序圖及要求 ................................................................................................................................... 30-21并行從動端口 (PSP) 時序圖及要求 .............................................................................................................. 30-22SSP 和 MSSP SPITM 模式時序波形圖及要求示例 ....................................................................................... 30-23SSP I2CTM 模式時序波形圖及要求示例 ........................................................................................................ 30-27MSSP I2CTM 模式時序波形圖及要求示例 ..................................................................................................... 30-30USART/SCI 時序波形圖及要求示例 ............................................................................................................. 30-328 位 A/D 時序波形圖及要求示例 ................................................................................................................... 30-3410 位A/D 時序波形圖及要求示例 ................................................................................................................. 30-36積分型A/D 時序波形圖及要求示例 ............................................................................................................... 30-38LCD 時序波形圖及要求示例 ......................................................................................................................... 30-40相關應用筆記 ............................................................................................................................................... 30-41版本歷史 ...................................................................................................................................................... 30-42第31 章 器件特性 31-1簡介 ............................................................................................................................................................... 31-2特性和電氣規范 ............................................................................................................................................. 31-2DC 和AC 特性圖表 ....................................................................................................................................... 31-2版本歷史 ...................................................................................................................................................... 31-22第32 章 開發工具 32-1簡介 ............................................................................................................................................................... 32-2集成開發環境（IDE） ................................................................................................................................... 32-3MPLAB® 軟件語言支持 ................................................................................................................................. 32-6MPLAB® SIM 軟件模擬器 ............................................................................................................................... 32-8MPLAB® 硬件仿真器支持 ............................................................................................................................... 32-9MPLAB® 編程器支持 ................................................................................................................................... 32-10輔助工具 ...................................................................................................................................................... 32-11開發板 ......................................................................................................................................................... 32-12針對其它Microchip 產品的開發工具 ............................................................................................................ 32-14相關應用筆記 ............................................................................................................................................... 32-15版本歷史 ...................................................................................................................................................... 32-16第33 章 代碼開發 33-1版本歷史 ........................................................................................................................................................ 33-2第34 章 附錄 34-1I2CTM 概述...................................................................................................................................................... 34-2LCD 玻璃基板生產商.................................................................................................................................... 34-11改進的器件特性............................................................................................................................................ 34-13版本歷史....................................................................................................................................................... 34-19第35 章 術語表 35-1版本歷史 ...................................................................................................................................................... 35-14目錄
上傳時間： 2013-11-15
上傳用戶：nanshan
FPGA與ARM EPI通信，控制16路步進電機和12路DC馬達 VHDL編寫的，，，，，
上傳時間： 2013-10-21
上傳用戶：zhyfjj
