The past decade has seen an explosion of machine learning research and appli-
cations; especially, deep learning methods have enabled key advances in many
applicationdomains,suchas computervision,speechprocessing,andgameplaying.
However, the performance of many machine learning methods is very sensitive
to a plethora of design decisions, which constitutes a considerable barrier for
new users. This is particularly true in the booming field of deep learning, where
human engineers need to select the right neural architectures, training procedures,
regularization methods, and hyperparameters of all of these components in order to
make their networks do what they are supposed to do with sufficient performance.
This process has to be repeated for every application. Even experts are often left
with tedious episodes of trial and error until they identify a good set of choices for
a particular dataset.
The PW2606B is a front-end over voltage and over current protection device. It achieves wide inputvoltage range from 2.5VDC to 40VDC. The over voltage threshold can be programmed externally orset to internal default setting. The low resistance of integrated power path nFET switch ensures betterperformance for battery charging system applications. It can deliver up to 1A current to satisfy thebattery supply system. It integrates the over-temperature protection shutdown and AUTO-recoverycircuit with hysteresis to protect against over current events
The PW2228A is a high efficiency single inductor Buck-Boost converter which can supply theload current up to 1.5A. It provides AUTO-transition between Buck and Boost Mode. The PW2228Aoperates at 2.4MHz switching frequency in CCM. DC/DC converter operates at Pulse-Skipping Modeat light load. The output voltage is programmable using an external resistor divider, or is fixed to3.3V internally. The load is disconnected from the VIN during shutdown.The PW2228A is available in TDFN3X3-10 package.
首先下載軟件，解壓軟件，安裝在程序中找到SEGGER,選里面的J-FLASH，進入界面，剛開始的那個界面可以忽略，不用建project也可以；單擊菜單欄的“Options---Project settings”打開設置，進行jlink配置;正在General選項，選擇“USB”，一般都是默認配置，確認一下即可;然后在CPU選項，選擇芯片型號，先選擇“Device”才能選擇芯片型號，芯片型號，要根據你使用的芯片進行選擇;在Target interface選項 里面選擇SWD模式;首先Target里面選“Connection”連接目標芯片，然后 Target--AUTO進行程序燒寫;首先Target里面選擇“Connection”連接目標芯片，然后 Target--AUTO進行程序燒寫.SEGGER J-Links are the most widely used line of debug probes available today. They've proven their value for more than 10 years in embedded development. This popularity stems from the unparalleled performance, extensive feature set, large number of supported CPUs, and compatibility with all popular development environments.
RX-8801 SA Features built-in 32.768 kHz DTCXO, High Stability Supports l'C-Bus's high speed mode (400 kHz)Alarm interrupt function for day, date, hour, and minute settings Fixed-cycle timer interrupt function Time update interrupt function32.768 kHz output with OE function AUTO correction of leap years Wide interface voltage range: 2.2 V to 5.5 V Wide time-keeping voltage range:1.8 V to 5.5 V Low current consumption: 0.84A/3V (Typ.)is an IC bus interface-compliant real-time clock which includes a 32.768 kHz DTCXO In addition to providing a calendar (year, month, date, day, hour, minute, second) function and a clock counter function, this module provides an abundance of other functions including an alarm function, fixed-cycle timer unction, time update interrupt function, and 32.768 kHz output function.The devices in this module are fabricated via a C-MOS process for low current consumption, which enables ong-term battery back-up.
第一章引言目前基于單片微機的語音系統的應用越來越廣泛，如電腦語音鐘、語音型數字萬用表、手機話費查詢系統、排隊機、監控系統語音報警以及公共汽車報站器等等。本文作者用Flash單片機ANT89C51和錄放時間達90%的數碼語音芯片ISD2590設計了一套智能語音錄放系統，實現了譜音的分段錄取、組合回放，整段錄取.循環播放，通過軟件修改可以實現很多場合的應用。第二章ISD2590語音芯片本系統采用關國ISD公司的ISD2590芯片，ISD2500系列具有抗斷電、音質好，使用方便等優點。它的最大特點在于片內E2PROM容量為480K（1400系列為128K），所以錄放時間長；有10個地址輸入端（1400系列僅為8個），尋址能力可達1024位；最多能分600段；設有OVF（溢出）端，便于多個器件級聯。2.1內部框圖圖2-1為ISD2590芯片的內部結構框圖。錄音時，語音信號從MIC，MICREF（17，18）引聊輸入，經過一個前置放大器放大，該放大器的增益由AGC（AUTO Gain Control，19）引腳所接的器件的伯控制。經放大的信號從ANAOUT腳輸出，經過阻容注被后ANAIN進入芯片內部。然后經過放大和濾波后存入EEPROM陣列中，放音時，在正確的時序控制的前提下，聲音信號將從EEPROM中經濾波放大后從SP+，SP一中輸出。
