基于FPGA設計的相關論文資料大全 84篇用FPGA實現FFT的研究
劉朝暉 韓月秋
摘 要 目的 針對高速數字信號處理的要求，給出了用現場可編程門陣列(FPGA)實現的
快速傅里葉變換(FFT)方案.方法 算法為按時間抽取的基4算法，采用遞歸結構的塊浮點運
算方案，蝶算過程只擴展兩個符號位以適應雷達信號處理的特點，乘法器由陣列乘法器實
現.結果 采用流水方式保證系統的速度，使取數據、計算旋轉因子、復乘、DFT等操作協
調一致，在計算、通信和存儲間取得平衡，避免了瓶頸的出現.結論 實驗表明，用FPGA
實現高速數字信號處理的算法是一個可行的方案.
關鍵詞 離散傅里葉變換； 快速傅里葉變換； 塊浮點運算； 可編程門陣列
分類號 TP39； TN957.511
Implementation of FFT with FPGA Technology
Liu Zhaohui Han Yueqiu
(Department of Electronics Engineering, Beijing Institute of Technology, Beijing 100081)
Abstract Aim To propose a scheme for implementing FFT with FPGA in accor-dance with the
requirement for high speed digital signal processing. Methods The structure of FPGA and
requirement of system were considered in the experiment, radix-4 algorithm of DIT and recursive
structure were adopted. The group float point arithmetic operation was used in the butterfly and the
array multiplier was used to realize multiplication. Results The pipeline pattern was used to ensure
the system speed, it made fetching data, calculating twiddle factor, complex multiplication and D
LED 線陣顯示裝置, 分為 LED 線性旋轉顯示主機和圖文錄入器兩部分。主機用直流電機帶動由紅綠 LED 組成的線陣旋轉, 同時線陣按照時序依次切換顯示狀態, 在固定區域利用視覺暫留效果形成 16×16 點陣, 用以顯示圖文;圖文錄入器用 HMI 觸控屏作為人機交互界面, 實現圖文錄入和回放功能。主機與圖文錄入器通過無線通信方式進行信息交互,可由圖文錄入器控制主機切換不同工作任務, 以及改變線陣顯示內容。The LED linear array display device is divided into two parts:the one is the main unit used to display content,and the other one is used to input the contents.The main unit is driven by a DC motor to rotate the linear array composed by red and green light emitting diodes.At the same time,the 16×16 dot matrix that switching the display state according to the time sequence on the main unit displays pictures and texts in the fixed area,by using the visual temporary effect.The HMI touch screen is used as human machine interface to realize the function that input and playback pictures and texts.The two parts of the device communicate with each other through wireless communication.The image and text input controller can control the main unit to switch different tasks and change the content of linear array displayed.
為了實時檢測血氧量,能使缺氧特別敏感的腦組織或心臟類疾病患者得到及時治療,采用近紅外雙波長透射式光電脈搏血氧測定法,以H橋電路對發射光源進行控制及通用運算放大器搭建濾波電路。運用參數理論計算和計算機仿真結果相對比的方法,通過Mu ltisim軟件對所設計電路進行仿真,仿真結果與理論參數計算相吻合,證明了電路參數設計的可行性,為血氧儀的實物制作提供參考。For real-time detection of oxygen saturation for timely treatment of the brain or heart,which are very sensitive to oxygen inadequacy,the near-infrared wavelengths double photoelectric pulse oximeter transmission method is adopted.The illuminant is controlled with the H bridge circuit and the filter circuit is built with general op-amps.Parameters by theoretical calculation is compared with the computer simulation results in Multisim and satisfactory results are obtained.It is shown that the design of the circuit parameters is feasible and can be a help in making the physical blood-oxygen monitor.
DescriptionThe IMX385LQR-C is a diagonal 8.35 mm (Type 1/2) CMOS active pixel type solid-state image sensor with a squarepixel array and 2.13 M effective pixels. This chip operates with analog 3.3 V, digital 1.2 V, and interface 1.8 V triplepower supply, and has low power consumption. High sensitivity, low dark current and no smear are achieved throughthe adoption of R, G and B primary color mosaic filters. This chip features an electronic shutter with variablecharge-integration time.(Applications: Surveillance cameras)
sony CMOS傳感器datasheet，IMX178LQJ-C_Data_SheetDescriptionThe IMX178LQJ-C is a diagonal 8.92 mm (Type 1/1.8) CMOS active pixel type image sensor with a square pixelarray and 6.44 M effective pixels. This chip operates with analog 2.9 V, digital 1.2 V and interface 1.8 V triple powersupply, and has low power consumption.High sensitivity, low dark current and no smear are achieved through the adoption of R, G and B primary colormosaic filters.This chip features an electronic shutter with variable charge-integration time.(Applications: Surveillance cameras, FA cameras, Industrial cameras)
