This is a program that I wrote many years ago. It is a floppy disk , disk copy,disk info,and format program. All written in masm assembler. There is also a small 252 byte driver that allows nonstandard floppy formats on dos systems below 7.0. Floppies can be formatted in any track and sector layout. 1.44M floppies can be formatted to 1.76 M. All source code,includes and libraries are included. Modify the bld.bat file to your own needs.
There are many asm tricks in the source code.
Have fun with this old code.
MATSNL is a package of MATLAB M-files for computing wireless sensor node lifetime/power budget and solving optimal node architecture choice problems. It is intended as an analysis and simulation tool for researchers and educators that are easy to use and Modify. MATSNL is designed to give the rough power/ lifetime predictions based on node and application specifications while giving useful insight on platform design for the large node lifetime by providing side-by-side comparison across various platforms. The MATSNL code and manual can be found at the bottom of this page. A related list of publications describing the models used in MATSNL is posted on the ENALAB part of the 2 project at http://www.eng.yale.edu/enalab/aspire.htm
This source code in Delphi 7.0.
Have function to decoding and encoding PDU format to ASCII and from ASCII to PDU.
You can Modify it or change it for meet your requirement.
MATSNL is a package of MATLAB M-files for computing wireless sensor node
lifetime/power budget and solving optimal node architecture choice problems. It is intended
as an analysis and simulation tool for researchers and educators that are easy to use and
Modify. MATSNL is designed to give the rough power/ lifetime predictions based on node
and application specifications while giving useful insight on platform design for the large
node lifetime by providing side-by-side comparison across various platforms.
matlab有限元網格劃分程序
DistMesh is a simple MATLAB code for generation of unstructured triangular and tetrahedral meshes. It was developed by Per-Olof Persson (now at UC Berkeley) and Gilbert Strang in the Department of Mathematics at MIT. A detailed description of the program is provided in our SIAM Review paper, see documentation below.
One reason that the code is short and simple is that the geometries are specified by Signed Distance Functions. These give the shortest distance from any point in space to the boundary of the domain. The sign is negative inside the region and positive outside. A simple example is the unit circle in 2-D, which has the distance function d=r-1, where r is the distance from the origin. For more complicated geometries the distance function can be computed by interpolation between values on a grid, a common representation for level set methods.
For the actual mesh generation, DistMesh uses the Delaunay triangulation routine in MATLAB and tries to optimize the node locations by a force-based smoothing procedure. The topology is regularly updated by Delaunay. The boundary points are only allowed to move tangentially to the boundary by projections using the distance function. This iterative procedure typically results in very well-shaped meshes.
Our aim with this code is simplicity, so that everyone can understand the code and Modify it according to their needs. The code is not entirely robust (that is, it might not terminate and return a well-shaped mesh), and it is relatively slow. However, our current research shows that these issues can be resolved in an optimized C++ code, and we believe our simple MATLAB code is important for demonstration of the underlying principles.
To use the code, simply download it from below and run it from MATLAB. For a quick demonstration, type "meshdemo2d" or "meshdemond". For more details see the documentation.
This book is based on a Ph.D. research that has been conducted at the Delft
University of Technology in the Netherlands in collaboration with Dutch Electricity
& Gas Distribution Network Operator, Stedin. This book was written as a result of
wider interest that was shown by different industry groups on this topic after its
public defence. This inspired the author to Modify and publish a practical version
of the research for a greater international audience. Therefore, the content of this
book is intended for a double audience, on the one hand for those interested in the
organisational and management aspects of maintenance.
Simulation is experimentation with models. For system design, research, and edu-
cation, simulations must not only construct and Modify many different models but
also store and access a large volume of results. That is practical only with models
programmed on computers [1,2]
This Getting Started Guide is written for Maxwell beginners and experienced users who would like to quickly re familiarize themselves with the capabilities of MaxwelL.This guide leads you step-by-step through solving and analyzing the results of a rotational actuator magnetostatic problem with motion By following the steps in this guide, you will learn how to perform the following tasks Modify a models design parameters y Assign variables to a model's design parameters.Specify solution settings for a design Validate a designs setupRun a maxwell simulation v Plot the magnetic flux density vecto v Include motion in the simulation本《入門指南》是為希望快速重新熟悉MaxwelL功能的Maxwell初學者和有經驗的用戶編寫的。本指南將引導您逐步解決和分析旋轉致動器靜運動問題的結果。按照本指南中的步驟，您將學習如何執行以下任務。修改模型設計參數y將變量分配給模型的設計參數。指定設計的解決方案設置驗證設計設置運行maxwell模擬v繪制磁通密度vecto v在模擬中包含運動
VIP專區-嵌入式/單片機編程源碼精選合集系列（32）資源包含以下內容：1. 無線音頻電話(gprs).2. 經典的psos編程實例源碼.3. 嵌入式系統文件管理部分.4. lwIP是瑞士計算機科學院（Swedish Institute of Computer Science）的Adam Dunkels等開發的一套用于嵌入式系統的開放源代碼TCP/IP協議棧。Lwip既可.5. 非常經典的網絡協議棧.6. "CAN0 CAN4 C"是CAN0和CAN4通訊的程序。用戶可參照此例程設置MSCAN模塊。本文件夾是為用戶提供的codeworrior編程范例.7. 本文件夾是為用戶提供的codeworrior編程范例.8. ucos-ii 編譯器ICCAVR CPU atmega8 8M 晶振 對原作者的ucos進行了簡化.9. "Port ucosii V252"是嵌入式操作系統uC/OS-II在DP256/DG128上移植的范例。提供的codeworrior編程范例.10. "SendA"通過調用監控程序.11. "printpp"是幫助用戶調試的一個工具.12. This program is free software you can redistribute it and/or Modify it under the terms of the GNU Ge.13. device driver for various TV and TV+FM radio tuners.14. D:MyData其它我的文章C51cp1_1 est.uv2 Project File Date: 04/02/2003.15. 一個簡單的TCP IP協議棧程序.16. 校園導游系統.17. 本文檔是關于boa web服務器的源程序.18. boa web服務器的主程序.19. 關于boa web服務器的配置文件.20. 嵌入式操作系統TCP/IP協議棧的socket小程序.21. 講解嵌入式TCP/IP協議棧的編寫.22. 本原代碼集是對計算機圖形學的編程實踐.23. 關于TCP/IP的一份碩士論文.24. 這是一個在VxWorks系統實現CS網卡END驅動的原代碼.25. 實現一個運行在16位數字信號處理器TMS320VC5402上的小型嵌入式TCP/IP協議棧。對TCP/IP協議中的IP協議、ARP協議、UDP協議進行分析.26. 此為講解內存技術的文檔資料.27. 我設計的數字電源的源代碼 還有原理圖.28. ARM MP3解碼源代碼1.0 有完整的項目文件.29. 基于WEB的嵌入式視頻采集壓縮瘦身服務器的設計與實現.30. 此文當為日本嵌入式tron的技術文檔,目前在日立等公司的主流嵌入式系統還是tron.31. C++的溫度控制系統,是本人在其它網站上找到的,還沒有試過.32. 基于牛頓迭代法的二次規劃程序.33. PCI總線與USB總線之間的數據通信的用戶端應用程序（包括界面和通信）.34. GIF動畫解碼算法.35. 一個嵌入式web server的源碼。小巧好用.36. 一個橋接器87ch47仿真器的c的源程序.37. 給ARM7用的MP3程序源碼.38. 給ucgui用的字庫HZK12,12x12點陣的漢字庫和hzk16點陣的漢字庫.39. 很多人想要的LCDSLIN.c文件是給UCGUI用的驅動文件.40. 下載管理器是基于HTTP1.1而建立的,支持?jǐn)帱c(diǎn)續傳.采用Java Swing創建了一個簡單高效的GUI界面,具有一次下載多個文件的能力..
