This example provides a description of how to use a DMA channel to transfer a
word data buffer from memory (Flash) to memory (RAM).
The dedicated DMA channel is configured to transfer once a time a 32 word data buffer
stored as constant in the Flash memory to another buffer in the RAM memory.
The received data are stored in the DST_Buffer.
The DMA channel transfer complete interrupt is enabled to generate an interrupt at
the end of the buffer transfer. As soon as the transfer is completed an interrupt is
generated and in the DMA channel interrupt routine the transfer complete interrupt
pending bit is cleared.
The data counter is stored before and after the transfer to show that all data has been
transfered.
TransferStatus gives the data transfer status where it is PASSED if transmitted and
received data are the same otherwise it is FAILED
NAME: u2440mon.c
DESC: u2440mon entry point,menu,download
HISTORY:
Mar.25.2002:purnnamu: S3C2400X profile.c is ported for S3C2410X.
Mar.27.2002:purnnamu: DMA is enabled.
Apr.01.2002:purnnamu: isDownloadReady flag is added.
Apr.10.2002:purnnamu: - Selecting menu is available in the waiting loop.
So, isDownloadReady flag gets not needed
- UART ch.1 can be selected for the console.
Aug.20.2002:purnnamu: revision number change 0.2 -> R1.1
Sep.03.2002:purnnamu: To remove the power noise in the USB signal, the unused CLKOUT0,1 is disabled.
200-MHz ARM920T Processor
• 16-kbyte Instruction Cache
• 16-kbyte Data Cache
• Linux® , Microsoft® Windows® CE-enabled MMU
• 100-MHz System Bus
• MaverickCrunch™ Math Engine
• Floating Point, Integer, and Signal Processing
Instructions
• Optimized for digital music compression and
decompression algorithms.
• Hardware interlocks allow in-line coding.
• MaverickKey™ IDs
• 32-bit Unique ID can be used for DRM-compliant
128-bit random ID.
• Integrated Peripheral Interfaces
• 32-bit SDRAM Interface
This example sets up the PLL in x10/2 mode, divides SYSCLKOUT by six to reach a 25Mhz HSPCLK (assuming a 30Mhz XCLKIN). The
clock divider in the ADC is not used so that the ADC will see the 25Mhz on the HSPCLK. Interrupts are enabled and the EVA is setup to generate a periodic ADC SOC on SEQ1. Two channels are converted, ADCINA3 and ADCINA2.
A certification path is an ordered list of certificates starting with a certificate issued by the relying
party s trust root, and ending with the target certificate that needs to be validated. Certification
path validation procedures are based on the algorithm supplied in ITU-T Recommendation X.509
and further defined in Internet Engineering Task Force (IETF) Request for Comments (RFC)
3280. Certification path processing verifies the binding between the subject distinguished name
and/or subject alternative name and the subject public key defined in the target certificate. The
binding is limited by constraints, which are specified in the certificates that comprise the path,
and inputs that are specified by the relying party. To ensure secure interoperation of PKI-enabled
applications, the path validation must be done in accordance with the X.509 and RFC 3280
specifications. This document provides the test assertions and the test cases for testing path
validation software against these specifications.
This book is for merging practical electronic
devices with the Internet, for hardware and software designers looking to expand their
skills of JAVA programming.This book is a complete introduction to Internet-enabled devices,it provide all of the information to inexpensively build web-enabled hardware.
LUFA (Lightweight USB Framework for AVRs) is my first foray into the world of USB. Originally based on the AT90USBKEY from Atmel, it is an open-source, driver for the USB-enabled AT90USBXXX AVR microcontroller series, released under the permissive MIT License (see documentation or project source for full license details). Currently, the AT90USB1286, AT90USB1287, AT90USB646, AT90USB647, AT90USB162, AT90USB82, ATMEGA16U4 and ATMEGA32U4 AVR microcontrollers are supported by the library. Supported boards are the USBKEY, STK525, STK526, ATAVRUSBRF01 and the RZUSBSTICK.
TdcHintEx
Provides your users with a cool transparent hint. It replaces standard Delphi hint window.
Just drop a TdcHintEx in your main form. Set Enabled to True. And run your application.
Oh btw, please set ShowHint to True.. :)
Drop me a line, and tell me what you think of it.
Antony Hoon
antony7777@telkom.net
