?? example_en_32bit_a.vhd
字號(hào):
-- VHDL Model Created from SCS Schematic example_en_32bit_a.sch
-- Aug 18, 2004 18:06
-- Automatically generated by vdvhdl version 9.6.2 Release Build2
library IEEE;
use IEEE.std_logic_1164.all;
entity COUNTER_EN_4BIT_S is
Port ( clear : In STD_LOGIC;
clk : In STD_LOGIC;
enable : In STD_LOGIC;
qa_r : Out STD_LOGIC;
qb_r : Out STD_LOGIC;
qc_r : Out STD_LOGIC;
qd_r : Out STD_LOGIC );
attribute syn_isclock: boolean;
attribute syn_isclock of clk: signal is true;
end COUNTER_EN_4BIT_S;
architecture SCHEMATIC of COUNTER_EN_4BIT_S is
attribute syn_macro : integer;
attribute dont_touch : boolean;
attribute syn_macro of SCHEMATIC : architecture is 1;
attribute dont_touch of SCHEMATIC : architecture is TRUE;
signal ED_a : STD_LOGIC;
signal ABCDE_a : STD_LOGIC;
signal BCD_a : STD_LOGIC;
constant GND : STD_LOGIC := '0';
constant VCC : STD_LOGIC := '1';
signal qa_r_DUMMY : STD_LOGIC;
signal qb_r_DUMMY : STD_LOGIC;
signal qc_r_DUMMY : STD_LOGIC;
signal qd_r_DUMMY : STD_LOGIC;
component SUPER_LOGIC
Port ( A1 : In STD_LOGIC;
A2 : In STD_LOGIC;
A3 : In STD_LOGIC;
A4 : In STD_LOGIC;
A5 : In STD_LOGIC;
A6 : In STD_LOGIC;
B1 : In STD_LOGIC;
B2 : In STD_LOGIC;
C1 : In STD_LOGIC;
C2 : In STD_LOGIC;
D1 : In STD_LOGIC;
D2 : In STD_LOGIC;
E1 : In STD_LOGIC;
E2 : In STD_LOGIC;
F1 : In STD_LOGIC;
F2 : In STD_LOGIC;
F3 : In STD_LOGIC;
F4 : In STD_LOGIC;
F5 : In STD_LOGIC;
F6 : In STD_LOGIC;
MP : In STD_LOGIC;
MS : In STD_LOGIC;
NP : In STD_LOGIC;
\NS\ : In STD_LOGIC;
OP : In STD_LOGIC;
OS : In STD_LOGIC;
PP : In STD_LOGIC;
PS : In STD_LOGIC;
QC : In STD_LOGIC;
QR : In STD_LOGIC;
QS : In STD_LOGIC;
AZ : Out STD_LOGIC;
FZ : Out STD_LOGIC;
NZ : Out STD_LOGIC;
OZ : Out STD_LOGIC;
Q2Z : Out STD_LOGIC;
QZ : Out STD_LOGIC );
end component;
begin
qa_r <= qa_r_DUMMY;
qb_r <= qb_r_DUMMY;
qc_r <= qc_r_DUMMY;
qd_r <= qd_r_DUMMY;
I1 : SUPER_LOGIC
Port Map ( A1=>BCD_a, A2=>GND, A3=>ED_a, A4=>GND, A5=>qa_r_DUMMY,
A6=>GND, B1=>ED_a, B2=>qc_r_DUMMY, C1=>qc_r_DUMMY,
C2=>ED_a, D1=>qb_r_DUMMY, D2=>GND, E1=>VCC,
E2=>qb_r_DUMMY, F1=>qc_r_DUMMY, F2=>GND, F3=>qd_r_DUMMY,
F4=>GND, F5=>VCC, F6=>GND, MP=>GND, MS=>qc_r_DUMMY,
NP=>enable, \NS\=>GND, OP=>GND, OS=>GND, PP=>GND,
PS=>GND, QC=>clk, QR=>clear, QS=>GND, AZ=>ABCDE_a,
FZ=>ED_a, NZ=>open, OZ=>open, Q2Z=>qb_r_DUMMY,
QZ=>qc_r_DUMMY );
I2 : SUPER_LOGIC
Port Map ( A1=>VCC, A2=>GND, A3=>VCC, A4=>GND, A5=>VCC, A6=>GND,
B1=>qa_r_DUMMY, B2=>GND, C1=>VCC, C2=>qa_r_DUMMY,
D1=>enable, D2=>qd_r_DUMMY, E1=>qd_r_DUMMY, E2=>enable,
F1=>qb_r_DUMMY, F2=>GND, F3=>qc_r_DUMMY, F4=>GND,
F5=>qd_r_DUMMY, F6=>GND, MP=>enable, MS=>GND, NP=>GND,
\NS\=>qd_r_DUMMY, OP=>GND, OS=>GND, PP=>GND, PS=>GND,
QC=>clk, QR=>clear, QS=>GND, AZ=>open, FZ=>BCD_a,
NZ=>open, OZ=>open, Q2Z=>qd_r_DUMMY, QZ=>qa_r_DUMMY );
end SCHEMATIC;
library IEEE;
use IEEE.std_logic_1164.all;
entity COUNTER_EN_4BIT_A is
Port ( clear : In STD_LOGIC;
clk : In STD_LOGIC;
enable : In STD_LOGIC;
enablehbit_a : Out STD_LOGIC;
qa_r : Out STD_LOGIC;
qb_r : Out STD_LOGIC;
qc_r : Out STD_LOGIC;
qd_r : Out STD_LOGIC );
attribute syn_isclock: boolean;
attribute syn_isclock of clk: signal is true;
end COUNTER_EN_4BIT_A;
architecture SCHEMATIC of COUNTER_EN_4BIT_A is
attribute syn_macro : integer;
attribute dont_touch : boolean;
attribute syn_macro of SCHEMATIC : architecture is 1;
attribute dont_touch of SCHEMATIC : architecture is TRUE;
signal ED_a : STD_LOGIC;
signal BCD_a : STD_LOGIC;
constant GND : STD_LOGIC := '0';
constant VCC : STD_LOGIC := '1';
signal enablehbit_a_DUMMY : STD_LOGIC;
signal qa_r_DUMMY : STD_LOGIC;
signal qb_r_DUMMY : STD_LOGIC;
signal qc_r_DUMMY : STD_LOGIC;
signal qd_r_DUMMY : STD_LOGIC;
component SUPER_LOGIC
Port ( A1 : In STD_LOGIC;
A2 : In STD_LOGIC;
A3 : In STD_LOGIC;
A4 : In STD_LOGIC;
A5 : In STD_LOGIC;
A6 : In STD_LOGIC;
B1 : In STD_LOGIC;
B2 : In STD_LOGIC;
C1 : In STD_LOGIC;
C2 : In STD_LOGIC;
D1 : In STD_LOGIC;
D2 : In STD_LOGIC;
E1 : In STD_LOGIC;
E2 : In STD_LOGIC;
F1 : In STD_LOGIC;
F2 : In STD_LOGIC;
F3 : In STD_LOGIC;
F4 : In STD_LOGIC;
F5 : In STD_LOGIC;
F6 : In STD_LOGIC;
MP : In STD_LOGIC;
MS : In STD_LOGIC;
NP : In STD_LOGIC;
\NS\ : In STD_LOGIC;
OP : In STD_LOGIC;
OS : In STD_LOGIC;
PP : In STD_LOGIC;
PS : In STD_LOGIC;
QC : In STD_LOGIC;
QR : In STD_LOGIC;
QS : In STD_LOGIC;
AZ : Out STD_LOGIC;
FZ : Out STD_LOGIC;
NZ : Out STD_LOGIC;
OZ : Out STD_LOGIC;
Q2Z : Out STD_LOGIC;
QZ : Out STD_LOGIC );
end component;
begin
enablehbit_a <= enablehbit_a_DUMMY;
qa_r <= qa_r_DUMMY;
qb_r <= qb_r_DUMMY;
qc_r <= qc_r_DUMMY;
qd_r <= qd_r_DUMMY;
I1 : SUPER_LOGIC
Port Map ( A1=>BCD_a, A2=>GND, A3=>ED_a, A4=>GND, A5=>qa_r_DUMMY,
A6=>GND, B1=>ED_a, B2=>qc_r_DUMMY, C1=>qc_r_DUMMY,
C2=>ED_a, D1=>qb_r_DUMMY, D2=>GND, E1=>VCC,
E2=>qb_r_DUMMY, F1=>enable, F2=>GND, F3=>qd_r_DUMMY,
F4=>GND, F5=>VCC, F6=>GND, MP=>GND, MS=>qc_r_DUMMY,
NP=>qc_r_DUMMY, \NS\=>GND, OP=>GND, OS=>GND, PP=>GND,
PS=>GND, QC=>clk, QR=>clear, QS=>GND,
AZ=>enablehbit_a_DUMMY, FZ=>ED_a, NZ=>open, OZ=>open,
Q2Z=>qb_r_DUMMY, QZ=>qc_r_DUMMY );
I2 : SUPER_LOGIC
Port Map ( A1=>VCC, A2=>GND, A3=>VCC, A4=>GND, A5=>VCC, A6=>GND,
B1=>qa_r_DUMMY, B2=>GND, C1=>VCC, C2=>qa_r_DUMMY,
D1=>enable, D2=>qd_r_DUMMY, E1=>qd_r_DUMMY, E2=>enable,
F1=>qb_r_DUMMY, F2=>GND, F3=>qc_r_DUMMY, F4=>GND,
F5=>qd_r_DUMMY, F6=>GND, MP=>enable, MS=>GND, NP=>GND,
\NS\=>qd_r_DUMMY, OP=>GND, OS=>GND, PP=>GND, PS=>GND,
QC=>clk, QR=>clear, QS=>GND, AZ=>open, FZ=>BCD_a,
NZ=>open, OZ=>open, Q2Z=>qd_r_DUMMY, QZ=>qa_r_DUMMY );
end SCHEMATIC;
library IEEE;
use IEEE.std_logic_1164.all;
entity COUNTER_EN_8BIT_II_A is
Port ( clear : In STD_LOGIC;
clk : In STD_LOGIC;
enable : In STD_LOGIC;
count : Out STD_LOGIC_VECTOR (7 downto 0) );
attribute syn_isclock: boolean;
attribute syn_isclock of clk: signal is true;
end COUNTER_EN_8BIT_II_A;
architecture SCHEMATIC of COUNTER_EN_8BIT_II_A is
attribute syn_macro : integer;
attribute dont_touch : boolean;
attribute syn_macro of SCHEMATIC : architecture is 1;
attribute dont_touch of SCHEMATIC : architecture is TRUE;
signal enable_8bit : STD_LOGIC;
signal count_DUMMY : STD_LOGIC_VECTOR (7 downto 0);
component COUNTER_EN_4BIT_S
Port ( clear : In STD_LOGIC;
clk : In STD_LOGIC;
enable : In STD_LOGIC;
qa_r : Out STD_LOGIC;
qb_r : Out STD_LOGIC;
qc_r : Out STD_LOGIC;
qd_r : Out STD_LOGIC );
end component;
component COUNTER_EN_4BIT_A
Port ( clear : In STD_LOGIC;
clk : In STD_LOGIC;
enable : In STD_LOGIC;
enablehbit_a : Out STD_LOGIC;
qa_r : Out STD_LOGIC;
qb_r : Out STD_LOGIC;
qc_r : Out STD_LOGIC;
qd_r : Out STD_LOGIC );
end component;
begin
count(7 downto 0) <= count_DUMMY(7 downto 0);
I4 : COUNTER_EN_4BIT_S
Port Map ( clear=>clear, clk=>clk, enable=>enable_8bit,
qa_r=>count_DUMMY(7), qb_r=>count_DUMMY(6),
qc_r=>count_DUMMY(5), qd_r=>count_DUMMY(4) );
I5 : COUNTER_EN_4BIT_A
Port Map ( clear=>clear, clk=>clk, enable=>enable,
enablehbit_a=>enable_8bit, qa_r=>count_DUMMY(3),
qb_r=>count_DUMMY(2), qc_r=>count_DUMMY(1),
qd_r=>count_DUMMY(0) );
end SCHEMATIC;
library IEEE;
use IEEE.std_logic_1164.all;
entity COUNTER_EN_8BIT_I_A is
Port ( clear : In STD_LOGIC;
clk : In STD_LOGIC;
enable : In STD_LOGIC;
count : Out STD_LOGIC_VECTOR (7 downto 0);
en_8bit_a : Out STD_LOGIC );
attribute syn_isclock: boolean;
attribute syn_isclock of clk: signal is true;
end COUNTER_EN_8BIT_I_A;
architecture SCHEMATIC of COUNTER_EN_8BIT_I_A is
attribute syn_macro : integer;
attribute dont_touch : boolean;
attribute syn_macro of SCHEMATIC : architecture is 1;
attribute dont_touch of SCHEMATIC : architecture is TRUE;
signal en_8bit3_a : STD_LOGIC;
signal en_8bit2_a : STD_LOGIC;
signal en_8bit1_a : STD_LOGIC;
signal enableh4bit : STD_LOGIC;
constant VCC : STD_LOGIC := '1';
constant GND : STD_LOGIC := '0';
signal count_DUMMY : STD_LOGIC_VECTOR (7 downto 0);
signal en_8bit_a_DUMMY : STD_LOGIC;
component COUNTER_EN_4BIT_A
Port ( clear : In STD_LOGIC;
clk : In STD_LOGIC;
enable : In STD_LOGIC;
enablehbit_a : Out STD_LOGIC;
qa_r : Out STD_LOGIC;
qb_r : Out STD_LOGIC;
qc_r : Out STD_LOGIC;
qd_r : Out STD_LOGIC );
end component;
component SUPER_LOGIC
Port ( A1 : In STD_LOGIC;
A2 : In STD_LOGIC;
A3 : In STD_LOGIC;
A4 : In STD_LOGIC;
A5 : In STD_LOGIC;
A6 : In STD_LOGIC;
B1 : In STD_LOGIC;
B2 : In STD_LOGIC;
C1 : In STD_LOGIC;
C2 : In STD_LOGIC;
D1 : In STD_LOGIC;
D2 : In STD_LOGIC;
E1 : In STD_LOGIC;
E2 : In STD_LOGIC;
F1 : In STD_LOGIC;
F2 : In STD_LOGIC;
F3 : In STD_LOGIC;
F4 : In STD_LOGIC;
F5 : In STD_LOGIC;
F6 : In STD_LOGIC;
MP : In STD_LOGIC;
MS : In STD_LOGIC;
NP : In STD_LOGIC;
\NS\ : In STD_LOGIC;
OP : In STD_LOGIC;
OS : In STD_LOGIC;
PP : In STD_LOGIC;
PS : In STD_LOGIC;
QC : In STD_LOGIC;
QR : In STD_LOGIC;
QS : In STD_LOGIC;
?? 快捷鍵說明
復(fù)制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號(hào)
Ctrl + =
減小字號(hào)
Ctrl + -