本程序是基于C54x DSP的通用實數FFT程序，適合點數16~1024點或復數點數8~512點，主程序為rfft.asm。
上傳時間： 2017-09-08
上傳用戶：ANRAN
des加密算法及實例，加密解密組件 支持版本： Delphi 4, 5, 6, 7 and 2005，2009 and Kylix 1 and 2 開源官方站點：http://www.cityinthesky.co.uk/ 支持加密算法: Blowfish Cast 128 Cast 256 DES, 3DES Ice, Thin Ice, Ice2 IDEA Mars Misty1 RC2, RC4, RC5, RC6 Rijndael (the new AES) Serpent Tea Twofish HASH算法： Haval MD4 MD5 RipeMD-128 RipeMD-160 SHA-1 SHA-256, SHA-384, SHA-512 Tiger
上傳時間： 2016-01-19
上傳用戶：yanshf
國際標準測試圖片，大小512*512和256*256，有灰度圖和彩色圖，可做算法 性能測試-the criterion images
標簽： images 圖像處理 常用標準 測試
上傳時間： 2016-04-25
上傳用戶：shiaijianjun
#include "STC90.h" #include < intrins.h > #define uchar unsigned char #define uint unsigned int #define led_port P1 sbit IR_RE = P3^2; sbit led_r = P1^3; sbit led_g = P1^4; sbit led_b = P1^5; sbit led_wd = P1^7; sbit K1 =P3^0 ; //增加鍵 sbit K2 =P3^1 ; //減少鍵 sbit BEEP =P3^7 ; //蜂鳴器 uchar temp,temp1; bit k=0; //紅外解碼判斷標志位，為0則為有效信號，為1則為無效 bit Flag2; uchar date[4]={0,0,0,0}; //date數組為存放地址原碼，反碼，數據原碼，反碼 uint lade_1,lade_2,lade_3,lade_4; uint num; uchar date_ram,ee_temp,ee_temp1; uchar WDT_NUM=0; uchar const dofly[]={0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x07,0x7f,0x6f};// 顯示段碼值01234567 uchar code seg[]={7,6,5,4,3,2,1,0};//分別對應相應的數碼管點亮,即位碼 unsigned long disp_date; void fade(); void fade1(); /*************************** 看門狗子程序*************************/ void watchdog_timer() { if(WDT_NUM==5) { WDT_NUM=0; led_wd=!led_wd; } WDT_NUM++; WDT_CONTR=0x3f; } /******************************************************************/ void delay(unsigned int cnt) { while(--cnt); } /*--------------------------延時1ms程子程序-----------------------*/ void delay_1ms(uint z) { uint x,y; for(x=z;x>0;x--) for(y=126;y>0;y--); } /*--------------------------延時1ms程子程序-----------------------*/ delay1000() { uchar i,j; i=5; do{j=95; do{j--;} while(j); i--; } while(i); } /*---------------------------延時882us子程序-----------------------*/ delay882() { uchar i,j; i=6; do{j=71; do{j--;} while(j); i--; }while(i); } /*--------------------------延時2400us程子程序-----------------------*/ delay2400() { uchar i,j; i=5; do{j=237; do{j--;} while(j); i--; }while(i); } /**********************************************************************/ /* void display() { uchar i; for(i=0;i<8;i++) { P0=dofly[disp_date%10];//取顯示數據，段碼 P2=seg[i]; //取位碼 delay_1ms(1); disp_date/=10; } } */ /*********************************************************************/ uchar EEPROM_read(uint addr)//EEPROM字節讀 { ISP_CONTR=0x83; //系統時鐘<12M時，對ISP_CONTR寄存器設置的值，本電路為11.0592M ISP_CMD=1; //字節讀 ISP_ADDRH=(addr&0xff00)>>8; ISP_ADDRL=addr&0x00ff; ISP_TRIG=0x46; ISP_TRIG=0xb9; _nop_(); _nop_(); return ISP_DATA; } //-------------------------------------------------------------------- void EEPROM_write(uint addr,uchar dat)//EEPROM字節寫 { ISP_CONTR=0x83; //系統時鐘<12M時，對ISP_CONTR寄存器設置的值，本電路為11.0592M ISP_CMD=2; //字節編程 ISP_ADDRH=(addr&0xff00)>>8; ISP_ADDRL=addr&0x00ff; ISP_DATA=dat; ISP_TRIG=0x46; ISP_TRIG=0xb9; _nop_(); _nop_(); } //-------------------------------------------------------------------- void EEPROM_ERASE(uint addr)//EEPROM扇區擦除 { ISP_CONTR=0x83; //系統時鐘<12M時，對ISP_CONTR寄存器設置的值，本電路為11.0592M ISP_CMD=3; //扇區擦除 ISP_ADDRH=(addr&0xff00)>>8; ISP_ADDRL=addr&0x00ff; ISP_TRIG=0x46; ISP_TRIG=0xb9; _nop_(); _nop_(); } //************************************************************** /*----------------------------------------------------------*/ /*-----------------------紅外解碼程序(核心)-----------------*/ /*----------------------------------------------------------*/ void IR_decode() { uchar i,j; while(IR_RE==0); delay2400(); if(IR_RE==1) //延時2.4ms后如果是高電平則是新碼 { delay1000(); delay1000(); for(i=0;i<4;i++) { for(j=0;j<8;j++) { while(IR_RE==0); //等待地址碼第1位高電平到來 delay882(); //延時882us判斷此時引腳電平 ///CY=IR_RE; if(IR_RE==0) { date[i]>>=1; date[i]=date[i]|0x00; } else if(IR_RE==1) { delay1000(); date[i]>>=1; date[i]=date[i]|0x80; } } //1位數據接收結束 } //32位二進制碼接收結束 } } /* void LED_PWM() { lade_2=num; //384 lade_4=num; //384 while(lade_2!=0&Flag2==1) { for(lade_3=512;lade_3>lade_4;lade_3--) //512 { led_port=0x00; delay(1); } lade_3=512; //512 lade_4--; for(lade_1=0;lade_1<lade_2;lade_1++) { led_port=0x38; //c7 delay(1); } lade_1=0; lade_2--; if(temp!=0x0c&Flag2==1) { lade_2=0; } lade_2=num; //384 lade_4=num; //384 } } */ void calc() { EEPROM_read(0x2000); ee_temp1=ISP_DATA; ee_temp=ee_temp1&0x0f; //************************************* 1 /* if(date[3]==0xff&Flag2==1) { if(num>=20) { num=num-80; } //else num=1; LED_PWM(); } if(date[3]==0xfe&Flag2==1) { if(num<=500) { num=num+80; } // else num=511; LED_PWM(); } if(ee_temp1==0xfd) { led_port=0x00; watchdog_timer(); } if(ee_temp1==0xfc) { led_port=0x00; led_r=1; led_g=1; led_b=1; watchdog_timer(); } */ //********************************************** 2 if(ee_temp1==0xfb) { led_port=0x00; led_r=1; watchdog_timer(); } if(ee_temp1==0xfa) { led_port=0x00; led_g=1; watchdog_timer(); } if(ee_temp1==0xf9) { led_port=0x00; led_b=1; watchdog_timer(); } if(ee_temp1==0xf8) { led_port=0x00; led_r=1; led_g=1; led_b=1; watchdog_timer(); } //************************************** 3 if(ee_temp1==0xf7) { uint fade_1,fade_2,fade_3,fade_4; fade_2=448; //384 fade_4=448; //384 while(fade_2!=0&ee_temp==0x07) { for(fade_3=512;fade_3>fade_4;fade_3--) //512 { led_port=0x10; delay(1); } fade_3=512; //512 fade_4--; watchdog_timer(); for(fade_1=0;fade_1<fade_2;fade_1++) { led_port=0x08; delay(1); } fade_1=0; fade_2--; if(ee_temp!=0x07) { fade_2=0; } watchdog_timer(); fade_2=448; //384 fade_4=448; //384 } } if(ee_temp1==0xf6) { uint fade_1,fade_2,fade_3,fade_4; fade_2=448; //384 fade_4=448; //384 while(fade_2!=0&ee_temp==0x06) { for(fade_3=512;fade_3>fade_4;fade_3--) //512 { led_port=0x20; delay(1); } fade_3=512; //512 fade_4--; watchdog_timer(); for(fade_1=0;fade_1<fade_2;fade_1++) { led_port=0x10; delay(1); } fade_1=0; fade_2--; if(ee_temp!=0x06) { fade_2=0; } watchdog_timer(); fade_2=448; //384 fade_4=448; //384 } } if(ee_temp1==0xf5) { uint fade_1,fade_2,fade_3,fade_4; fade_2=448; //384 fade_4=448; //384 while(fade_2!=0&ee_temp==0x05) { for(fade_3=512;fade_3>fade_4;fade_3--) //512 { led_port=0x08; delay(1); } fade_3=512; //512 fade_4--; watchdog_timer(); for(fade_1=0;fade_1<fade_2;fade_1++) { led_port=0x20; delay(1); } fade_1=0; fade_2--; if(ee_temp!=0x05) { fade_2=0; } watchdog_timer(); fade_2=448; //384 fade_4=448; //384 } } if(ee_temp1==0xf4) { while(ee_temp==4) { led_port=0x00; led_r=1; delay_1ms(200); led_port=0x00; led_r=1; led_g=1; delay_1ms(200); led_port=0x00; led_g=1; delay_1ms(200); watchdog_timer(); led_port=0x00; led_g=1; led_b=1; delay_1ms(200); led_port=0x00; led_b=1; delay_1ms(200); led_port=0x00; led_b=1; led_r=1; delay_1ms(200); watchdog_timer(); } } //************************************** 4 if(ee_temp1==0xf3) { uint fade_1,fade_2,fade_3,fade_4; fade_2=416; //384 fade_4=416; //384 while(fade_2!=0&ee_temp==0x03) { for(fade_3=512;fade_3>fade_4;fade_3--) //512 { led_port=0x10; delay(1); } fade_3=512; //512 fade_4--; watchdog_timer(); for(fade_1=0;fade_1<fade_2;fade_1++) { led_port=0x08; delay(1); } fade_1=0; fade_2--; if(ee_temp!=0x03) { fade_2=0; } watchdog_timer(); fade_2=416; //384 fade_4=416; //384 } } if(ee_temp1==0xf2) { uint fade_1,fade_2,fade_3,fade_4; fade_2=384; //384 fade_4=384; //384 while(fade_2!=0&ee_temp==0x02) { for(fade_3=512;fade_3>fade_4;fade_3--) //512 { led_port=0x20; delay(1); } fade_3=512; //512 fade_4--; watchdog_timer(); for(fade_1=0;fade_1<fade_2;fade_1++) { led_port=0x10; delay(1); } fade_1=0; fade_2--; if(ee_temp!=0x02) { fade_2=0; } watchdog_timer(); fade_2=384; //384 fade_4=384; //384 } } if(ee_temp1==0xf1) { uint fade_1,fade_2,fade_3,fade_4; fade_2=348; //384 fade_4=348; //384 while(fade_2!=0&ee_temp==0x01) { for(fade_3=512;fade_3>fade_4;fade_3--) //512 { led_port=0x08; delay(1); } fade_3=512; //512 fade_4--; watchdog_timer(); for(fade_1=0;fade_1<fade_2;fade_1++) { led_port=0x20; delay(1); } fade_1=0; fade_2--; if(ee_temp!=0x01) { fade_2=0; } watchdog_timer(); fade_2=348; //384 fade_4=348; //384 } } if(ee_temp1==0xf0) { while(ee_temp==0) { led_port=0x00; led_r=1; delay_1ms(500); watchdog_timer(); led_port=0x00; led_g=1; delay_1ms(500); led_port=0x00; led_b=1; delay_1ms(500); watchdog_timer(); } } //******************************************** 5 if(ee_temp1==0xef) { uint fade_1,fade_2,fade_3,fade_4; fade_2=384; //384 fade_4=384; //384 while(fade_2!=0&ee_temp==0x0f) { for(fade_3=512;fade_3>fade_4;fade_3--) //512 { led_port=0x10; delay(1); } fade_3=512; //512 fade_4--; watchdog_timer(); for(fade_1=0;fade_1<fade_2;fade_1++) { led_port=0x08; delay(1); } fade_1=0; fade_2--; if(ee_temp!=0x0f) { fade_2=0; } watchdog_timer(); fade_2=384; //384 fade_4=384; //384 } } if(ee_temp1==0xee) { uint fade_1,fade_2,fade_3,fade_4; fade_2=320; //384 fade_4=320; //384 while(fade_2!=0&ee_temp==0x0e) { for(fade_3=512;fade_3>fade_4;fade_3--) //512 { led_port=0x20; delay(1); } fade_3=512; //512 fade_4--; watchdog_timer(); for(fade_1=0;fade_1<fade_2;fade_1++) { led_port=0x10; delay(1); } fade_1=0; fade_2--; if(ee_temp!=0x0e) { fade_2=0; } watchdog_timer(); fade_2=320; //384 fade_4=320; //384 } } if(ee_temp1==0xed) { uint fade_1,fade_2,fade_3,fade_4; fade_2=320; //384 fade_4=320; //384 while(fade_2!=0&ee_temp==0x0d) { for(fade_3=512;fade_3>fade_4;fade_3--) //512 { led_port=0x08; delay(1); } fade_3=512; //512 fade_4--; watchdog_timer(); for(fade_1=0;fade_1<fade_2;fade_1++) { led_port=0x20; delay(1); } fade_1=0; fade_2--; if(ee_temp!=0x0d) { fade_2=0; } watchdog_timer(); fade_2=320; //384 fade_4=320; //384 } } if(ee_temp1==0xec) fade(); //******************************************* 6 if(ee_temp1==0xeb) { led_port=0x00; led_r=1; led_g=1; watchdog_timer(); } if(ee_temp1==0xea) { led_port=0x00; //led_r=0; led_g=1; led_b=1; watchdog_timer(); } if(ee_temp1==0xe9) { led_port=0x00; led_r=1; //led_g=0; led_b=1; watchdog_timer(); } if(ee_temp1==0xe8) fade1(); } void fade() { // uchar i; uint fade_1,fade_2,fade_3,fade_4; fade_2=512; fade_4=511; while(fade_2!=0&ee_temp==0x0c) { for(fade_3=512;fade_3>fade_4;fade_3--) { led_port=0x10; delay(1); } fade_3=512; fade_4--; watchdog_timer(); for(fade_1=0;fade_1<fade_2;fade_1++) { led_port=0x08; delay(1); } fade_1=0; fade_2--; if(ee_temp!=0x0c) { fade_2=0; } } watchdog_timer(); fade_2=512; fade_4=511; while(fade_2!=0&ee_temp==0x0c) { if(ee_temp!=0x0c) { fade_2=0; } for(fade_3=512;fade_3>fade_4;fade_3--) { led_port=0x20; delay(1); // watchdog_timer(); } fade_3=512; fade_4--; watchdog_timer(); for(fade_1=0;fade_1<fade_2;fade_1++) { led_port=0x10; delay(1); // watchdog_timer(); } fade_1=0; fade_2--; } watchdog_timer(); fade_2=512; fade_4=511; while(fade_2!=0&ee_temp==0x0c) { if(ee_temp!=0x0c) { fade_2=0; } for(fade_3=512;fade_3>fade_4;fade_3--) { led_port=0x08; delay(1); watchdog_timer(); } fade_3=512; fade_4--; watchdog_timer(); for(fade_1=0;fade_1<fade_2;fade_1++) { led_port=0x20; delay(1); watchdog_timer(); } fade_1=0; fade_2--; } watchdog_timer(); } void fade1() { // uchar i; uint fade_1,fade_2,fade_3,fade_4; fade_2=128; fade_4=127; while(fade_2!=0&ee_temp==0x08) { for(fade_3=128;fade_3>fade_4;fade_3--) { led_port=0x10; delay(1); } fade_3=128; fade_4--; for(fade_1=0;fade_1<fade_2;fade_1++) { led_port=0x08; delay(1); } fade_1=0; fade_2--; if(ee_temp!=0x08) { fade_2=0; } } watchdog_timer(); fade_2=128; fade_4=127; while(fade_2!=0&ee_temp==0x08) { if(ee_temp!=0x08) { fade_2=0; } for(fade_3=128;fade_3>fade_4;fade_3--) { led_port=0x20; delay(1); } fade_3=128; fade_4--; for(fade_1=0;fade_1<fade_2;fade_1++) { led_port=0x10; delay(1); } fade_1=0; fade_2--; } watchdog_timer(); fade_2=128; fade_4=127; while(fade_2!=0&ee_temp==0x08) { if(ee_temp!=0x08) { fade_2=0; } for(fade_3=128;fade_3>fade_4;fade_3--) { led_port=0x08; delay(1); } fade_3=128; fade_4--; for(fade_1=0;fade_1<fade_2;fade_1++) { led_port=0x20; delay(1); } fade_1=0; fade_2--; } watchdog_timer(); } void init() { led_port=0x00; /* led_r=1; delay_1ms(500); led_port=0x00; led_g=1; delay_1ms(500); led_port=0x00; led_b=1; delay_1ms(500); led_port=0x00; */ delay_1ms(2); WDT_CONTR=0x3f; delay_1ms(500); } //******************************** void main() { init(); Flag2=0; SP=0x60; //堆棧指針 EX0=1; //允許外部中斷0,用于檢測紅外遙控器按鍵 EA=1; num=255; while(1) { calc(); } } //******************************************************************** /*------------------------外部中斷0程序-------------------------*/ /*------------------主要用于處理紅外遙控鍵值--------------------*/ void int0() interrupt 0 { uchar i; Flag2=0; /////// k=0; EX0=0; //檢測到有效信號關中斷，防止干擾 for(i=0;i<4;i++) { delay1000(); if(IR_RE==1){k=1;} //剛開始為9ms的引導碼. } led_port=0x00; if(k==0) { IR_decode(); //如果接收到的是有效信號，則調用解碼程序 if(date[3]>=0xe8) { if(date[3]<=0xfb) { temp1=date[3]; EEPROM_ERASE(0x2000); //STC_EEROM_0X2000 temp1 EEPROM_write(0x2000,temp1); EEPROM_read(0x2000); ee_temp1=ISP_DATA; ee_temp=ee_temp1&0x0f; /* temp=date[3]&0x0f; EEPROM_ERASE(0x2004); //STC_EEROM_0X2004 temp EEPROM_write(0x2004,temp); */ } else { EEPROM_read(0x2000); ee_temp1=ISP_DATA; ee_temp=ee_temp1&0x0f; } } delay2400(); delay2400(); delay2400(); delay_1ms(500); } EX0=1; //開外部中斷，允許新的遙控按鍵 }
上傳時間： 2016-07-02
上傳用戶：184890962
燈光行業的通訊標準，這是1992版協議。
上傳時間： 2016-07-28
上傳用戶：derek
型 號：VK1625 / 品牌 VINTEK/VINKA/元泰 封裝形式：QFP100 LQFP100 DICE裸片 COB邦定片 定制COG 基本說明 VK1625是一個外圍設備專門設計的I / O型微控制器用于LCD擴大顯示功能。該裝置的顯示部分512模式（64x8）。它也支持串行接口，蜂鳴器響，看門狗定時器和時基定時器功能。HT1625是一個內存映射和多功能的LCD控制器。的VK1625軟件配置特征使它適合于多種LCD應用包括液晶顯示模塊和顯示子系統。只用三條線是主機控制器和VK1625之間的接口要求。有QFP100封裝，LQFP100封裝。 QQ：1918885898 VK1625 產品特征 ★：工作電壓：2.7V ~ 5.2V ★：內置的RC振蕩器 ★：外部的32.768kHz晶體和32kHz頻率源的輸入 ★：1 / 4偏壓，1 / 8的duty，幀頻為64Hz ★：64x8顯示模式8X64段 ★：內置的內部電阻式偏置發生器 ★：三條線串行接口 ★：8種時基/ WDT的選擇 ★：時基或WDT溢出輸出 ★：液晶顯示內存的R / W地址自動遞增 ★：兩個可選蜂鳴器的頻率（2／3） ★：關機命令降低功耗 ★：軟件配置特征 ★：數據模式和命令模式指令 ★：三條數據訪問模式 ★：提供 VLCD引腳來調整 LCD 工作電壓 ★：規格介紹 100引腳 LQFP封裝 VK1625 LQFP100 100引腳 QFP封裝VK1625 QFP100
標簽： 1625 LCD VK HT 液晶 顯示驅動 程序設計
上傳時間： 2018-07-10
上傳用戶：szqxw1688
Thepredecessorvolumeofthisbookwaspublishedin1996.Intheyears since then, some things have changed and some have not. Two of the things that have not changed are the desire for better models and faster simulations. I performed the original simulations on my “hyperfast” 133-MHz computer! At the time, I thought if I could just getafastercomputer,allofourSPICEproblemswouldbehistory,right? TodayIamsimulatingonacomputerthathasa2.6-GHzprocessorwith 512 MB of RAM, and I would still say that simulations run too slow. The computer technology has evolved, but so have the models. In 1996 wewereperformingsimulationson100-kHzpowerconverters,whereas today I routinely see 1- and 2-MHz power converters.
標簽： Switch-Mode Simulation Supply Power
上傳時間： 2020-06-07
上傳用戶：shancjb
PIC32MX5XX/6XX/7XX，具有圖形接口、USB、CAN和以太網的32位單片機 （最多 512 KB 閃存和 128 KB SRAM）單片機
標簽： 單片機
上傳時間： 2021-12-13
上傳用戶：
/*************************MAX7219低4位顯示dutycycleA變量，高4位顯示dutycycleB變量旋轉EC11改變dutycycleA變量大小按下EC11按鈕時，將dutycycleA變量寫入EEPROM，然后再將EEPROM儲存信息賦值給dutycycleB8A的EEPROM為512字節一個扇區，每次寫入數據前都需要先擦除扇區再寫入，所以不是同時修改的數據盡量不要放在一個扇區************************/程序簡單，但是注釋很詳細，附帶有手冊。非常適合初學者
上傳時間： 2022-01-28
上傳用戶：trh505
STM32系列單片機Altium Designer AD原理圖庫元件庫CSV text has been written to file : STM32系列單片機.csvLibrary Component Count : 19Name Description----------------------------------------------------------------------------------------------------STM32F030C6 32位STM單片機STM32F030C8 Flaah:64/RAM:8/IO:39STM32F030F4 Flash: 16K/RAM: 4K/IO: 15STM32F030K6 32位STM單片機STM32F051C8 Flaah:64/RAM:20/IO:36STM32F100C8 Flaah:64/RAM:8/IO:39STM32F103C8 Flaah:64/RAM:20/IO:36STM32F103C8_A Flaah:64/RAM:20/IO:36STM32F103RB Flaah:64/RAM:20/IO:51STM32F103RE 32位STM單片機STM32F103V 32位STM單片機100引腳STM32F103VC 32位STM單片機100引腳STM32F105R8 Flaah:64/RAM:64/IO:51STM32F105RB Flaah:128/RAM:64/IO:51STM32F205RG 32位STM單片機STM32F20x 32位ST單片機STM32F405ZG Flaah:1024/RAM:192/IO:114STM32F407ZE Flaah:512/RAM:192/IO:114STM32F407ZG Flaah:1024/RAM:192/IO:114
標簽： stm32 單片機 Altium Designer
上傳時間： 2022-03-13
上傳用戶：
蟲蟲下載站版權所有 京ICP備2021023401號-1
