In this document, the term Ô60xÕ is used to denote a 32-bit microprocessor from the PowerPC architecture family that conforms to the bus interface of the PowerPC 601ª, PowerPC 603ª, or PowerPC 604 microprocessors. Note that this does not include the PowerPC 602ª microprocessor which has a multiplexed address/data bus. 60x processors implement the PowerPC architecture as it is speciÞed for 32-bit addressing, which provides 32-bit effective (logical) addresses, integer data types of 8, 16, and 32 bits,and ßoating-point data types of 32 and 64 bits (single-precision and double-precision).1.1 Overview The MPC106 provides an integrated high-bandwidth, high-performance, TTL-compatible interface between a 60x processor, a secondary (L2) cache or additional (up to four total) 60x processors, the PCI bus,and main memory. This section provides a block diagram showing the major functional units of the 106 and describes brießy how those units interact.Figure 1 shows the major functional units within the 106. Note that this is a conceptual block diagram intended to show the basic features rather than an attempt to show how these features are physically implemented on the device.
標簽： Bridge Memory Contr MPC
上傳時間： 2013-10-08
上傳用戶：18711024007
The P90CL301 is a highly integrated 16/32 bit micro-controller especially suitable for applications requiring lowvoltage and low power consumption. It is fully software compatible with the 68000. Furthermore, it provides bothstandard as well as advanced peripheral functions on-chip.One of these peripheral functions is the I2C bus. This report describes worked-out driver software (written in C) toprogram the P90CL301 I2C interface. It also contains interface software routines offering the user a quick start inwriting a complete I2C system application.
上傳時間： 2014-01-06
上傳用戶：氣溫達上千萬的
This application note demonstrates how to write an Inter Integrated Circuit bus driver (I2C) for the XA-S3 16-bitMicrocontroller from Philips Semiconductors.Not only the driver software is given. This note also contains a set of (example) interface routines and a smalldemo application program. All together it offers the user a quick start in writing a complete I2C system applicationwith the PXAS3x.The driver routines support interrupt driven single master transfers. Furthermore, the routines are suitable foruse in conjunction with real time operating systems.
標簽： software driver XA-S I2C
上傳時間： 2013-11-02
上傳用戶：zw380105939
The XA-S3 is a member of Philips Semiconductors’ XA (eXtended Architecture) family of high performance 16-bit single-chip Microcontrollers. The XA-S3 combines many powerful peripherals on one chip. Therefore, it is suited for general multipurpose high performance embedded control functions.One of the on-chip peripherals is the I2C bus interface. This report describes worked-out driver software (written in C) to program / use the I2C interface of the XA-S3. The driver software, together with a demo program and interface software routines offer the user a quick start in writing a complete I2C - XAS3 system application.
上傳時間： 2013-11-10
上傳用戶：liaofamous
當拿到一張CASE單時，首先得確定的是能用什么母體才能實現此功能，然后才能展開對外圍硬件電路的設計，因此首先得了解每個母體的基本功能及特點，下面大至的介紹一下本公司常用的IC：?jiǎn)涡酒鉀Q方案• SN8P1900 系列– 高精度 16-Bit 模數轉換器– 可編程運算放大器 (PGIA)• 信號放大低漂移: 2V• 放大倍數可編程: 1/16/64/128 倍– 升壓- 穩壓調節器 (Charge-Pump Regulator)• 電源輸入: 2.4V ~ 5V• 穩壓輸出: e.g. 3.8V at SN8P1909– 內置液晶驅動電路 (LCD Driver)– 單芯片解決方案 • 耳溫槍 SN8P1909 LQFP 80 Pins• 5000 解析度量測器 SN8P1908 LQFP 64 Pins• 體重計 SN8P1907 SSOP 48 Pins單芯片解決方案• SN8P1820 系列– 精確的12-Bit 模數轉換器– 可編程運算放大器 (PGIA)• Gain Stage One: Low Offset 5V, Gain: 16/32/64/128• Gain Stage One: Low Offset 2mV, Gain: 1.3 ~ 2.5– 升壓- 穩壓調節器• 電源輸入: 2.4V ~ 5V• 穩壓輸出: e.g. 3.8V at SN8P1829– 內置可編程運算放大電路– 內置液晶驅動電路 – 單芯片解決方案 • 電子醫療器 SN8P1829 LQFP 80 Pins 高速/低功耗/高可靠性微控制器• 最新SN8P2000 系列– SN8P2500/2600/2700 系列– 高度抗交流雜訊能力• 標準瞬間電壓脈沖群測試 (EFT): IEC 1000-4-4• 雜訊直接灌入芯片電源輸入端• 只需添加1顆 2.2F/50V 旁路電容• 測試指標穩超 4000V (歐規)– 高可靠性復位電路保證系統正常運行• 支持外部復位和內部上電復位• 內置1.8V 低電壓偵測可靠復位電路• 內置看門狗計時器保證程序跳飛可靠復位– 高抗靜電/栓鎖效應能力– 芯片工作溫度有所提高: -200C ~ 700C 工規芯片溫度： -400C ~ 850C 高速/低功耗/高可靠性微控制器• 最新 SN8P2000 系列– SN8P2500/2600/2700 系列– 1T 精簡指令級結構• 1T: 一個外部振蕩周期執行一條指令• 工作速度可達16 MIPS / 16 MHz Crystal– 工作消耗電流 < 2mA at 1-MIPS/5V– 睡眠模式下消耗電流 < 1A / 5V額外功能• 高速脈寬調制輸出 (PWM)– 8-Bit PWM up to 23 KHz at 12 MHz System Clock– 6-Bit PWM up to 93 KHz at 12 MHz System Clock– 4-Bit PWM up to 375 KHz at 12 MHz System Clock• 內置高速16 MHz RC振蕩器 (SN8P2501A)• 電壓變化喚醒功能• 可編程控制沿觸發/中斷功能– 上升沿 / 下降沿 / 雙沿觸發• 串行編程接口
標簽： 單片機 線路設計
上傳時間： 2013-10-21
上傳用戶：jiahao131
全遙控6聲道AV機的匯編程序:;;;;;;;;;;;;;;;;;;;6CH AMPLIFIER;;;;;;;;;;;;;;;;;----腳位定義-----;;;;;;;;;;;;;;;;;;;6CH AMPLIFIER;;;;;;;;;;;;;;;;;----腳位定義----- PT6311_CLK EQU P3.4PT6311_STB EQU P3.5PT6311_DATA EQU P3.3 UP EQU P3.1DOEN EQU P3.0 PT2313_DATA EQU P0.7PT2313_CLK EQU P2.7 AC3 EQU P2.6 ;(控制4053的信號) M62429_DA EQU P2.3 ;(SURL/R)M62429_CK EQU P2.4 M62429_CK1 EQU P2.5 ;(C/BW) M62429_CK3 EQU P0.0 ;(ECHO,MVOL)M62429_DA3 EQU P1.7M_DELAY1 EQU P0.1M_DELAY2 EQU P0.2 AD_OUT BIT P0.5AD_IN BIT P0.6 ;----片內RAM定義--------GIF_SIGN EQU 40H ; 動畫進程標記(=1,走過場字幕 )GIF_TIME1 EQU 41H ; 動畫跑字的時間間隔速度GIF_LONG EQU 42H ; 動畫字幕的長度 DISP_BUFFER EQU 43H ; 顯示緩沖區地址指針DISP_INDEX EQU 44H ; PT6311片內地址指針
上傳時間： 2013-10-19
上傳用戶：fac1003
基于AT89C2051的紅外遙控學習器源程序6 源程序 ORG 0000H AJMP MAIN ORG 0003H AJMP KEYPRESS ORG 000BH AJMP TIMEOUT ORG 001BH AJMP TIMEOUT SENDDUAN BIT P3.0 JIEDUAN BIT P3.1 INTRPO BIT P3.2 JIEXUAN BIT P3.3 SENDLIGHT BIT P3.4 JIELIGHT BIT P3.5 CS BIT P3.7 DATADUAN BIT P1.6 CLK BIT P1.7 JIANWEI EQU R5 JIANMA EQU R6 SHANGJIAN EQU 07H;R7 OPENKEY EQU 81H CLOSEKEY EQU 00H CHUT0 EQU 11H CHUT1 EQU 11H BUFBEGIN EQU 18H OPENT1 EQU 88H CLOSET1 EQU 00H OPENT0 EQU 82H CLOSET0 EQU 00H DATABEG1 EQU 0AAH DATABEG2 EQU 33H ORG 0030HMAIN: MOV IE,#80H MOV IP,#00H MOV P3,#0FFH CLR CS SETB P1.0 SETB P1.1 SETB P1.2 CLR P1.3 CLR P1.4 CLR P1.5 CLR P1.6 CLR P1.7 MOV R3,#80H MOV R0,00HCYCLE1: MOV @R0,#00H INC R0 DJNZ R3,CYCLE1 MOV PSW,#00H MOV SP,#07H MOV TMOD,#11H MOV TCON,#00H START: MOV SP,#07H SETB SENDDUAN CLR F0 SETB EXOWAITKEY: MOV C,F0 JNC WAITKEY CJNC JIANMA,#1BH,SEND LCALL LEARNP LJMP STARTSEND: LCALL SENDP LJMP START SENDP: SETB SENDDUAN CLR F0 MOV TMOD,#CHUT1
上傳時間： 2013-10-15
上傳用戶：lyy1234
//芯片資料請到www.elecfans.com查找 //DS1820 C51 子程序//這里以11.0592M晶體為例，不同的晶體速度可能需要調整延時的時間//sbit DQ =P2^1;//根據實際情況定義端口 typedef unsigned char byte;typedef unsigned int word; //延時void delay(word useconds){ for(;useconds>0;useconds--);} //復位byte ow_reset(void){ byte presence; DQ = 0; //pull DQ line low delay(29); // leave it low for 480us DQ = 1; // allow line to return high delay(3); // wait for presence presence = DQ; // get presence signal delay(25); // wait for end of timeslot return(presence); // presence signal returned} // 0=presence, 1 = no part //從 1-wire 總線上讀取一個字節byte read_byte(void){ byte i; byte value = 0; for (i=8;i>0;i--) { value>>=1; DQ = 0; // pull DQ low to start timeslot DQ = 1; // then return high delay(1); //for (i=0; i<3; i++); if(DQ)value|=0x80; delay(6); // wait for rest of timeslot } return(value);} //向 1-WIRE 總線上寫一個字節void write_byte(char val){ byte i; for (i=8; i>0; i--) // writes byte, one bit at a time { DQ = 0; // pull DQ low to start timeslot DQ = val&0x01; delay(5); // hold value for remainder of timeslot DQ = 1; val=val/2; } delay(5);} //讀取溫度char Read_Temperature(void){ union{ byte c[2]; int x; }temp; ow_reset(); write_byte(0xCC); // Skip ROM write_byte(0xBE); // Read Scratch Pad temp.c[1]=read_byte(); temp.c[0]=read_byte(); ow_reset(); write_byte(0xCC); //Skip ROM write_byte(0x44); // Start Conversion return temp.x/2;}
上傳時間： 2013-11-03
上傳用戶：hongmo
T2作為波特率控制UART_RXD 是硬中斷0或1口，如果能進入中斷，說明該線有一個起始位產生，進入中斷后調用下面的接收程序。退出硬中斷之前還需要將硬中斷標志重新復位。UART_TXD 是任何其它IO即可。UART_SEND: PUSH IE PUSH DPH PUSH DPL PUSH PSW PUSH 00H PUSH ACC CLR EA SETB UART_TXD ;START BIT MOV R0,A CLR TR2 ;TR2置1,計數器2啟動,時間計數啟動。 MOV A,RCAP2L;計數器2重新裝載值 MOV TL2,A ;置計數器2初值 ;T2需要重新裝載 MOV A,DPH MOV A,RCAP2H MOV TH2,A MOV A,R0 SETB TR2 ;TR2置1,計數器 JNB TF2,$ CLR TF2 JNB TF2,$ CLR TF2
標簽： 模擬串口 通訊程序 匯編代碼 編寫
上傳時間： 2014-01-12
上傳用戶：二十八號
#include <at24c01a.h>/*************************************************向24C01A寫入一個字節輸入：E2ROM地址，字節數據******************************************************/void write24c01a(uchar uadd_1,uchar udata_1){sendbyte=0xa0;start();send(sendbyte);if (!ack())continue;send(uadd_1);if (!ack())continue;send(udata_1)if (!ack())continue;stop();}/**********************************發送開始*****************************************/void start(void){a_scl=1;a_sda=1;a_sda=0;a_scl=0;a_scl=1;}/********************************************發送停止*******************************************/void stop(void){a_scl=0;a_sda=0;a_scl=1;a_sda=1;} /*********************************************發送反饋************************************************/bit ack(void){int a_acka_scl=0;a_scl=0;a_scl=0;a_scl=1;a_ack=a_sda;a_scl=0;return(a_ack)}/**************************************發送無反饋********************************************/bit noack(void){int a_ack;a_scl=1;a_scl=1;a_scl=0;}/*******************************************發送****************************************************/void send(uchar undata){uchar i;sendbyte=undatafor(i=8;i>0;i--){a_sda=sendbyte7;a_scl=0;a_scl=1;sendbyte=sendbyte<<1}}/********************************************接受****************************************************/ void receive(void){int i;uchar data;for(i=8;i>0;i--){ a_scl=1;receivebyte7=a_sda;a_scl=0;receivebyte=receivebyte>>1}receivedata=receivebyte;}/********************************************向 24c01a讀一個字節；輸入：EEROM地址；輸出：EEROM數據；********************************************/void read24c01a(uchar counter){receivebyte=0xa1;start();send(receivebyte);if (!ack())continue;send(counter);if (!ack())continue;receive()noack();stop();}
上傳時間： 2013-12-23
上傳用戶：wxhwjf
蟲蟲下載站版權所有 京ICP備2021023401號-1
