This leon3 design is tailored to the Altera NiosII Startix2
Development board, with 16-bit DDR SDRAM and 2 Mbyte of SSRAM.
As of this time, the DDR interface only works up to 120 MHz.
At 130, DDR data can be read but not written.
NOTE: the test bench cannot be simulated with DDR enabled
because the Altera pads do not have the correct delay models.
* How to program the flash prom with a FPGA programming file
1. Create a hex file of the programming file with Quartus.
2. Convert it to srecord and adjust the load address:
objcopy --adjust-vma=0x800000 output_file.hexout -O srec fpga.srec
3. Program the flash memory using grmon:
flash erase 0x800000 0xb00000
flash load fpga.srec
Spartan 3 Digilent Demo:This demo drives the perphrials on the Spartan 3 board. This drives a simple pattern to the VGA port, connects the switches to the LEDs, buttons to each anode of the seven segment decoder. The seven segment decoder has a simple counter running on it, and when SW0 is in the up position the seven segment decoder will display scan codes from the PS2 port. This demo how ever does not drive the RS-232 port or the memory. This is a simple design done entirely VHDL not microblaze.
This a simple bootloader for AT91SAM7{S,X}{64,128,256} processors. It
permits you to download new code to the device over USB. This bootrom is
installed at address 0x00000000 in the ARM, which means that it is the
first piece of code to execute after reset. At startup, it waits for
a few seconds to see if the downloader is trying to connect. If not,
then the bootloader gives up control and jumps to your program. If the
downloader is trying to connect, then the bootloader receives the new
program over USB and writes it into flash.
This package consists of the executable (UCW), a default script file,
this file, and the library files. It is important that the header files
end up in a include subdirectory of the directory where UCW is found.
If you unzip this file using its path information ( use folder names ) this will
automatically happen. You can optionally specify the UnderC directory
with the environment variable UC_HOME note that this points to the directory
containing ucw.exe. If you do this, then you can copy the executable anywhere
and it will still be able to find the header files.
Welcome to UnderC version 1.2.9w
This package consists of the executable (UCW), a default script file,
this file, and the library files. It is important that the header files
end up in a include subdirectory of the directory where UCW is found.
If you unzip this file using its path information ( use folder names ) this will
automatically happen. You can optionally specify the UnderC directory
with the environment variable UC_HOME note that this points to the directory
containing ucw.exe. If you do this, then you can copy the executable anywhere
and it will still be able to find the header files.
vs.net技術(shù)內(nèi)幕
The release of the Microsoft Visual Studio .NET (and Visual C++ .NET in particular) has underscored Microsoft’s increasing focus on Internet technologies, which are at the heart of the Microsoft .NET architecture. In addition to supporting the .NET initiative, Visual C++ .NET keeps all the productivity-boosting features you’re familiar with, such as Edit And Continue, IntelliSense, AutoComplete, and code tips. Visual C++ .NET also includes many new features such as managed code extensions for .NET programming, support for attributed code, and a more consistent development environment. These features take Visual C++ .NET to a new level. This book will get you up to speed on the latest technologies introduced into Visual C++.
VDSP++打開。This directory contains an example ADSP-BF537 RTC project that does a basic blink routine and
then puts the part in deep sleep mode to be woken up from a RTC Stopwatch Event. Once woken up,
the RTC is reconfigured to toggle the EZ KIT LEDs using RTC second, minute, hour, and day interrupts.
The Original USB 2.0 specification released on April 27, 2000
Errata to the USB 2.0 specification as of December 7, 2000
Mini-B connector Engineering Change Notice to the USB 2.0 specification.
Pull-up/pull-down Resistors Engineering Change Notice to the USB 2.0 specification.
Errata to the USB 2.0 specification as of May 28, 2002
Interface Association Descriptor Engineering Change Notice to the USB 2.0 specification.
Rounded Chamfer Engineering Change Notice to the USB 2.0 specification as of October 8, 2003
Unicode Engineering Change Notice to the USB 2.0 specification as of February 21, 2005
Inter-Chip USB Supplement Revision 1.0 as of March 13, 2006
Revision 1.3 of the USB On-The-Go Supplement as of December 5, 2006
Revision 1.01 of the Micro-USB Cables and Connectors Specification as of April 4, 2007
USB 2.0 Link Power Management Addendum Engineering Change Notice to the USB 2.0 specification as of July 16, 2007.
