This example describes how to use the ADC and DMA to transfer continuously
converted data from ADC to a data Buffer.
The ADC is configured to converts continuously ADC channel14.
Each time an end of conversion occurs the DMA transfers, in circular mode, the
converted data from ADC1 DR register to the ADC_ConvertedValue variable.
The ADC1 clock is set to 14 MHz.
usb bulk 傳輸例程。
* The bulkusb driver is a generic function driver, based on the Windows Driver Model (WDM).
* Supports Plug and Play(PnP), Power Management(PM), Windows Management Instrumentation (WMI) and the Selective Suspend (SS) features.
* This sample is based off the selSusp DDK sample. Please refer the selSusp sample and the DDK docs to understand the handling of PnP, PM, WMI and SS features and implementations.
*
The USB device used for this sample is a generic Intel I82930 USB evaluation board programmed with a simple loopback test using a 64 KB circular Buffer. None of the code in the sample is specific to this controller chip.
富士通單片機MB902420系列
CAN Project:
CAN0 will work as a simple Repeater.
Received data will appear at Port P47..P40 (UserLEDs of FlashCan100P)
and will send out again as byte-packages to ID#2
Receive-Buffer #1 : basic can
Transmit-Buffer #6 : full-can ID #2
富士通單片機MB902420系列
extINT Project:
All external Interrupt-Pins INT0 .. INT7 will be enabled.
A falling edge on INTx will toggle PDR4_P4x
in order to toggle the LEDx of the Flash-CAN-100P Board
e.g. falling edge on INT3 will result in LED D3 will toggleP47..P40 (UserLEDs of FlashCan100P)
and will send out again as byte-packages to ID#2
Receive-Buffer #1 : basic can
Transmit-Buffer #6 : full-can ID #2
// This Communications Component is implemented using separate Read and Write
// threads. Messages from the threads are posted to the Comm control which is
// an invisible window. To handle data from the comm port, simply
// attach a handler to OnReceiveData . There is no need to free the memory
// Buffer passed to this handler. If TAPI is used to open the comm port, some
// changes to this component are needed ( StartComm currently opens the comm
// port). The OnRequestHangup event is included to assist this.
//
// David Wann
// Stamina Software
// 28/02/96
// davidwann@hunterlink.net.au
NIST Net – A Linux-based Network Emulation Tool, It is a raw IP packet filter with many controllable channel parameters such as packet loss ratio, jitter, bandwidth variation, delay, and network Buffer size. To simulate different network environments
Full compliance with the USB Specification v1.1 and USB CDC v1.1
Support the RS232 Serial interface
Support automatic handshake mode
Support Remote wake-up and power management
256 bytes Buffer each for upstream and downstream data flow
Support default ROM or external EEPROM for device configuration
On chip USB transceiver
On chip crystal oscillator running at 12M Hz
Supports Windows 98/SE, ME, 2000, XP, Windows CE3.0, CE .NET, Linux, and Mac OS
28 Pins SOIC package
28
