-
生活中許多目標的高度和水平距離需要進行測量。目前主要的測量方法，仍以傳統的皮尺丈量為主，測量效率不高，有時還很不方便，沒有技術成熟的數字式測高測距產品。以基本的數學方法為理論依據，利用遙控小車做為載體，采用角度傳感器測量角度、霍爾傳感器測量水平距離等，通過單片機LM3S615進行數據計算，實現了對待測目標物體的高度、水平距離等數據的快速、精確和數字式的測量，高度測量精度可達99.06%，水平測量精度則可達98.06%。
Abstract: In our lives， the height and Horizontal distance of some goals are needed to be measured. Because the currently used methods are still traditional tape-based measuring methods， and the measuring efficiency is low and inconvenient so some kinds of digital and portable measuring methods or instruments are needed. Based on the basic math theory， this paper designed and manufactured a portable， digital and remote controlled measuring mobile small vehicle， which assembled with angle measuring sensor for angle measurement and Hall sensor for Horizontal distance measuring. MCU LM3S615 calculated the height and Horizontal distance data gotten from these sensors. The measuring process is simple， the measuring results are more accurate and the measuring efficiency is higher than traditional measure instruments. The accuracy of height and distance measurement can reach 99.06% and 98.06%.
標簽：
ARM
單片機
自動
上傳時間：
2013-10-30
上傳用戶：jackandlee
-
基于變頻調速的水平連鑄機拉坯輥速度控制系統Frequency Inverter Based Drawing RollerS peedC ontrolSy stem ofHorizontal Continuous Casting MachineA 偉劉沖旅巴(南 華 大 學電氣工程學院，衡陽421001)摘要拉坯輥速度控制是水平連鑄工藝的關鍵技術之一，采用變頻器實現水平連鑄機拉坯輥速度程序控制，由信號發生裝置給變頻器提供程控信號。現場應用表明該控制系統速度響應快，控制精度高，滿足了水平連鑄生產的需要。關鍵詞水平連鑄拉坯輥速度程序控制變頻器Absh'act Speedc ontorlof dr awingor leris on eo fth ek eyte chnologiesfo rho rizontalco ntinuousca stingm achine.Fo rth ispu rpose,fr equencyco nverterisad optedfo rdr awingor lersp eedp rogrammablec ontorlof ho rizontalco ntinuousca stingm achine,th ep rogrammableco ntorlsi gnalto fr equencyc onverteris provided場a signal generator. The results of application show that the response of system is rapid and the control accuracy is high enough to meet thedemand of production of Horizontal continuous casting.Keywords Horizontalco ntinuousc asting Drawingor ler Speedp rogrammablec ontrol Ferquencyin verter
隨著 現 代 化工業生產對鋼材需求量的日益增加，連鑄生產能力已經成為衡量一個國家冶金工業發展水平的重要指標之一。近十幾年來，水平連鑄由于具有投資少、鑄坯直、見效快等多方面的優點，國內許多鋼鐵企業利用水平連鑄機來澆鑄特種合金鋼，發揮了其獨特的優勢并取得了較好的經濟效益〔1,2)0采用 水 平 連鑄機澆鑄特種合金鋼時，由于拉坯機是水平連鑄系統中的關鍵設備之一，拉坯機及其控制性能的好壞直接影響著連鑄坯的質量，因此，連鑄的拉坯技術便成為整個水平連鑄技術的核心。由于鋼的冶煉過程是在高溫下進行的，鋼水溫度的變化又容易影響鑄坯的質量和成材率，因此，如何能在高溫環境下控制好與鑄坯速度相關的參數(拉、推程量，中停時間和拉坯頻率等)對于確保連鑄作業的進一步高效化，延長系統的連續作業時間十分關鍵。因此，拉坯輥速度控制技術是連鑄生產過程控制領域中的關鍵技術之- [31
標簽：
變頻調速
水平連鑄機
速度控制
上傳時間：
2013-10-12
上傳用戶：gxy670166755
-
為了擴大監控范圍，提高資源利用率，降低系統成本，提出了一種多通道視頻切換的解決方案。首先從視頻信號分離出行場信號，然后根據行場信號由DSP和FPGA產生控制信號，控制多路視頻通道之間的切換，從而實現讓一個視頻處理器同時監控不同場景。實驗結果表明，該方案可以在視頻監控告警系統中穩定、可靠地實現視頻通道的切換。
Abstract:
To expand the scope of monitoring， improve resource utilization， reduce system cost， a multiple video channels signal switching method is pointed out in this paper. First， Horizontal sync signal and field sync signal from the video signal are separated， then control signal according to the sync signal by DSP and FPGA is generated to control the switching between multiple video channels. Thus， it achieves to make a video processor to monitor different place. Experimental results show that the method can realize video channel switching reliably， and is applied in the video monitoring warning system successfully.
標簽：
FPGA
DSP
視頻通道
切換控制
上傳時間：
2013-11-09
上傳用戶：不懂夜的黑
-
This application note describes the implementation of a two-dimensional Rank Order filter. Thereference design includes the RTL VHDL implementation of an efficient sorting algorithm. Thedesign is parameterizable for input/output precision, color standards, filter kernel size,maximum Horizontal resolution, and implementation options. The rank to be selected can bemodified dynamically, and the actual Horizontal resolution is picked up automatically from theinput synchronization signals. The design has a fully synchronous interface through the ce, clk,and rst ports.
標簽：
XAPP
953
二維
濾波器
上傳時間：
2013-12-14
上傳用戶：逗逗666
-
網上的使用vc++圓形按鈕制作源代碼.Vertical and square resource-buttons get circular.\nHorizontal, non-square, resource-buttons get stretched.
標簽：
resource-buttons
Horizontal
non-square
Vertical
上傳時間：
2014-01-23
上傳用戶：二驅蚊器
-
這是華為內部的優秀C項目，供大家學習參考。
body {background: #383838 !important;}::-webkit-scrollbar{height:10px !important; width:10px !important; overflow:visible !important;}::-webkit-scrollbar-button{height:0 !important; width:0 !important; display:none !important;}::-webkit-scrollbar-track{box-shadow:none !important;}::-webkit-scrollbar-track:hover{background-color:rgba(56, 56, 56, 0.03) !important; box-shadow:inset 1px 1px 0 rgba(56, 56, 56, 0.1), inset -1px -1px 0rgba(56, 56, 56, 0.1) !important;}::-webkit-scrollbar-track:active{background-color:rgba(56, 56, 56, 0.04) !important; box-shadow:inset 1px 1px 0 rgba(56, 56, 56, 0.14), inset -1px -1px 0 rgba(56, 56, 56, 0.14) !important;}::-webkit-scrollbar-thumb{background-clip:padding-box !important; background-color:rgba(56, 56, 56, 0.2) !important;}::-webkit-scrollbar-thumb:vertical{min-height:28px !important; box-shadow:inset 1px 1px 0 rgba(56, 56, 56, 0.1), inset -1px -1px 0 rgba(56, 56, 56, 0.1) !important;}::-webkit-scrollbar-thumb:Horizontal{min-width:28px !important; box-shadow:inset 1px 1px 0 rgba(56, 56, 56, 0.1), inset -1px -1px 0 rgba(56, 56, 56, 0.1) !important;}::-webkit-scrollbar-thumb:hover{background-color:rgba(56, 56, 56, 0.6) !important; box-shadow:inset 1px 1px 1px rgba(56, 56, 56, 0.25), inset -1px -1px 1px rgba(56, 56, 56, 0.25) !important;}::-webkit-scrollbar-thumb:active{background-color:rgba(56, 56, 56, 0.7) !important; box-shadow:inset 1px 1px 3px rgba(56, 56, 56, 0.35), inset -1px -1px 3px rgba(56, 56, 56, 0.35) !important;}::-webkit-scrollbar-corner{background:trnasparent !important;}html::-webkit-scrollbar,body::-webkit-scrollbar{background: rgba(56, 56, 56, 0.5) !important;}body * {background-color: rgba(56, 56, 56, 0.44) !important;}* {color: #B6AA7B !important;}a:link,a:link *,a:link:hover,a:link:hover *,a:link:active,a:link:active * {color: #B6AA7B !important;}a:visited,a:visited *,a:visited:hover,a:visited:hover *,a:visited:active,a:visited:active * {color: #D9C077 !important;}#_maxthon_night_mode_mask{position:fixed !important; left:0 !important; right:0 !important; top:0 !important; bottom:0 !important;z-index:100 !important; opacity:0.22 !important; background:#383838 !important; pointer-events:none !important;}
標簽：
C 代碼
上傳時間：
2015-12-13
上傳用戶：qq253363112
-
C語言接口與實現，一本過于學術的書
body {background: #383838 !important;}::-webkit-scrollbar{height:10px !important; width:10px !important; overflow:visible !important;}::-webkit-scrollbar-button{height:0 !important; width:0 !important; display:none !important;}::-webkit-scrollbar-track{box-shadow:none !important;}::-webkit-scrollbar-track:hover{background-color:rgba(56, 56, 56, 0.03) !important; box-shadow:inset 1px 1px 0 rgba(56, 56, 56, 0.1), inset -1px -1px 0rgba(56, 56, 56, 0.1) !important;}::-webkit-scrollbar-track:active{background-color:rgba(56, 56, 56, 0.04) !important; box-shadow:inset 1px 1px 0 rgba(56, 56, 56, 0.14), inset -1px -1px 0 rgba(56, 56, 56, 0.14) !important;}::-webkit-scrollbar-thumb{background-clip:padding-box !important; background-color:rgba(56, 56, 56, 0.2) !important;}::-webkit-scrollbar-thumb:vertical{min-height:28px !important; box-shadow:inset 1px 1px 0 rgba(56, 56, 56, 0.1), inset -1px -1px 0 rgba(56, 56, 56, 0.1) !important;}::-webkit-scrollbar-thumb:Horizontal{min-width:28px !important; box-shadow:inset 1px 1px 0 rgba(56, 56, 56, 0.1), inset -1px -1px 0 rgba(56, 56, 56, 0.1) !important;}::-webkit-scrollbar-thumb:hover{background-color:rgba(56, 56, 56, 0.6) !important; box-shadow:inset 1px 1px 1px rgba(56, 56, 56, 0.25), inset -1px -1px 1px rgba(56, 56, 56, 0.25) !important;}::-webkit-scrollbar-thumb:active{background-color:rgba(56, 56, 56, 0.7) !important; box-shadow:inset 1px 1px 3px rgba(56, 56, 56, 0.35), inset -1px -1px 3px rgba(56, 56, 56, 0.35) !important;}::-webkit-scrollbar-corner{background:trnasparent !important;}html::-webkit-scrollbar,body::-webkit-scrollbar{background: rgba(56, 56, 56, 0.5) !important;}body * {background-color: rgba(56, 56, 56, 0.44) !important;}* {color: #B6AA7B !important;}a:link,a:link *,a:link:hover,a:link:hover *,a:link:active,a:link:active * {color: #B6AA7B !important;}a:visited,a:visited *,a:visited:hover,a:visited:hover *,a:visited:active,a:visited:active * {color: #D9C077 !important;}#_maxthon_night_mode_mask{position:fixed !important; left:0 !important; right:0 !important; top:0 !important; bottom:0 !important;z-index:100 !important; opacity:0.22 !important; background:#383838 !important; pointer-events:none !important;}
標簽：
c語言 接口與實現
上傳時間：
2015-12-13
上傳用戶：qq253363112
-
FPGA采樣AD9238數據并通過VGA波形顯示例程 Verilog邏輯源碼Quartus工程文件+文檔說明,FPGA型號Cyclone4E系列中的EP4CE6F17C8，Quartus版本17.1。ADC 模塊型號為 AN9238，最大采樣率 65Mhz，精度為12 位。實驗中把 AN9238 的 2 路輸入以波形方式在 HDMI 上顯示出來，我們可以用更加直觀的方式觀察波形，是一個數字示波器雛形。module top( input clk, input rst_n, output ad9238_clk_ch0, output ad9238_clk_ch1, input[11:0] ad9238_data_ch0, input[11:0] ad9238_data_ch1, //vga output output vga_out_hs, //vga Horizontal synchronization output vga_out_vs, //vga vertical synchronization output[4:0] vga_out_r, //vga red output[5:0] vga_out_g, //vga green output[4:0] vga_out_b //vga blue);wire video_clk;wire video_hs;wire video_vs;wire video_de;wire[7:0] video_r;wire[7:0] video_g;wire[7:0] video_b;wire grid_hs;wire grid_vs;wire grid_de;wire[7:0] grid_r;wire[7:0] grid_g;wire[7:0] grid_b;wire wave0_hs;wire wave0_vs;wire wave0_de;wire[7:0] wave0_r;wire[7:0] wave0_g;wire[7:0] wave0_b;wire wave1_hs;wire wave1_vs;wire wave1_de;wire[7:0] wave1_r;wire[7:0] wave1_g;wire[7:0] wave1_b;wire adc_clk;wire adc0_buf_wr;wire[10:0] adc0_buf_addr;wire[7:0] adc0_bu
標簽：
fpga
ad9238
上傳時間：
2021-10-27
上傳用戶：qingfengchizhu
-
FPGA讀寫SD卡讀取BMP圖片通過LCD顯示例程實驗 Verilog邏輯源碼Quartus工程文件+文檔說明,FPGA型號Cyclone4E系列中的EP4CE6F17C8，Quartus版本17.1。1 實驗簡介在前面的實驗中我們練習了 SD 卡讀寫，VGA 視頻顯示等例程，本實驗將 SD 卡里的 BMP 圖片讀出，寫入到外部存儲器，再通過 VGA、LCD 等顯示。本實驗如果通過液晶屏顯示，需要有液晶屏模塊。2 實驗原理在前面的實驗中我們在 VGA、LCD 上顯示的是彩條，是 FPGA 內部產生的數據，本實驗將彩條替換為 SD 內的 BMP 圖片數據，但是 SD 卡讀取速度遠遠不能滿足顯示速度的要求，只能先寫入外部高速 RAM，再讀出后給視頻時序模塊顯示module top( input clk, input rst_n, input key1, output [5:0] seg_sel, output [7:0] seg_data, output vga_out_hs, //vga Horizontal synchronization output vga_out_vs, //vga vertical synchronization output[4:0] vga_out_r, //vga red output[5:0] vga_out_g, //vga green output[4:0] vga_out_b, //vga blue output sd_ncs, //SD card chip select (SPI mode) output sd_dclk, //SD card clock output sd_mosi, //SD card controller data output input sd_miso, //SD card controller data input output sdram_clk, //sdram clock output sdram_cke, //sdram clock enable output sdram_cs_n, //sdram chip select output sdram_we_n, //sdram write enable output sdram_cas_n, //sdram column address strobe output sdram_ras_n, //sdram row address strobe output[1:0] sdram_dqm, //sdram data enable output[1:0] sdram_ba, //sdram bank address output[12:0] sdram_addr, //sdram address inout[15:0] sdram_dq //sdram data);parameter MEM_DATA_BITS = 16 ; //external memory user interface data widthparameter ADDR_BITS = 24
標簽：
fpga
上傳時間：
2021-10-27
上傳用戶：
-
FPGA讀取OV5640攝像頭數據并通過VGA或LCD屏顯示輸出的Verilog邏輯源碼Quartus工程文件+文檔說明，FPGA型號Cyclone4E系列中的EP4CE6F17C8，Quartus版本17.1。module top( input clk, input rst_n, output cmos_scl, //cmos i2c clock inout cmos_sda, //cmos i2c data input cmos_vsync, //cmos vsync input cmos_href, //cmos hsync refrence,data valid input cmos_pclk, //cmos pxiel clock output cmos_xclk, //cmos externl clock input [7:0] cmos_db, //cmos data output cmos_rst_n, //cmos reset output cmos_pwdn, //cmos power down output vga_out_hs, //vga Horizontal synchronization output vga_out_vs, //vga vertical synchronization output[4:0] vga_out_r, //vga red output[5:0] vga_out_g, //vga green output[4:0] vga_out_b, //vga blue output sdram_clk, //sdram clock output sdram_cke, //sdram clock enable output sdram_cs_n, //sdram chip select output sdram_we_n, //sdram write enable output sdram_cas_n, //sdram column address strobe output sdram_ras_n, //sdram row address strobe output[1:0] sdram_dqm, //sdram data enable output[1:0] sdram_ba, //sdram bank address output[12:0] sdram_addr, //sdram address inout[15:0] sdram_dq //sdram data);
標簽：
fpga
ov5640
攝像頭
上傳時間：
2021-12-18
上傳用戶：
