<bdo id="qy4o4"></bdo>
The design of battery-powered equipment can often bequite challenging. Since few ICs can operate directly fromthe end-of-life voltage from a 2-cell battery (about 1.8V),most systems require a DC/DCconverter. The systemdesigner often has a limited area in which to place the DC/DC converter; associated inductors and capacitors must be
上傳時間： 2013-11-23
上傳用戶：wys0120
產生壞塊的原因是因?yàn)镹AND Flash的工藝不能保證NAND的Memory Array在其生命周期中保持性能的可靠，所以，在NAND的生產中及使用過程中會產生壞塊。
標簽： NAND_Flash
上傳時間： 2013-10-24
上傳用戶：wojiaohs
STM32，5110液晶顯示聲納探魚器200KHz，帶電路圖，精確到厘米 MC34063升壓，大聲壓發射，實際板子上濾波電路沒要（電路圖上的濾波電阻電容電感沒焊，開路或者短路）。一般200KHz的換能器在水里面的耦合比較好，在空氣中發射出來的（或者接收的）強度很低。 用的MOSFET Relay，contact和release時間都可以做到很小，不過選的是比較低端器件，所以最近測量距離為70cm。 開源啦開源啦 架構為狀態機+任務流，Task都是放在函數指針數組里面的 Task分兩種，routine的和錯誤處理的 5110液晶的SPI用的DMA 基本上STM32和C語言高階的特征都用上了，稍微修改直接可以商用 Open Issue 偶爾會hardware fault或者memory fault，然后watchdog重啟， 應該比較好解決，仔細檢查下就好 有什么問題代碼的file comment里面有我聯系地址 有能搞到好的器件也請知會我，多謝了 接下來準備把它裝到船模上，用以前四軸的那套東西，就看什么時候有時間了
上傳時間： 2013-10-28
上傳用戶：songyue1991
SD 卡（Secure Digital Memory Card）是一種為滿足安全性、容量、性能和使用環境等各方面的需求而設計的一種新型存儲器件，SD 卡允許在兩種模式下工作，即SD 模式和SPI 模式，本系統采用SPI 模式。本小節僅簡要介紹在SPI 模式下，STM32 處理器如何讀寫SD 卡，如果讀者如希望詳細了解SD 卡，可以參考相關資料。
標簽： SD卡
上傳時間： 2013-11-12
上傳用戶：huannan88
在理論分析循環碼編碼和譯碼基本原理的基礎上，提出了基于單片機系統的(24，16)循環碼軟件實現編碼、譯碼的方案。仿真結果表明(24，16)循環碼能有效地克服來自通訊信道的干擾，保證數據通信的可靠及系統的穩定，使誤碼率大幅度降低。本論文對(24，16)循環碼的研究結果表明，可以有效地降低錯誤概率和提高系統的吞吐量，實現糾錯僅需要在接收端增加有限的存儲空間和計算復雜度，具有一定的實用價值。 Abstract: Based on analyzing the theory of encoding and decoding of cyclic code， this paper showed the schemes of encoding and decoding of(24，16)cyclic code by the software and based on microcontroller. Simulation results show that using (24，16) cyclic codes can effectively overcome the interference from communication channel， ensure the reliability and stability of data communication systems， and reduce the bit error rate greatly. The results of this paper show that by using the (24，16) cyclic code， the error rate can be reduced and the system throughput can be improved. Meanwhile， the system only needs to enlarge limited storage space and computation the complexity at the receiving end to realize error correction. Thus the (24，16) cyclic code has a practical value.
標簽： 24 16 單片機系統 循環碼
上傳時間： 2013-11-09
上傳用戶：gaoliangncepu
HIGH SPEED 8051 μC CORE - Pipe-lined Instruction Architecture; Executes 70% of Instructions in 1 or 2 System Clocks - Up to 25MIPS Throughput with 25MHz System Clock - 22 Vectored Interrupt Sources MEMORY - 4352 Bytes Internal Data RAM (256 + 4k) - 64k Bytes In-System Programmable FLASH Program Memory - External Parallel Data Memory Interface – up to 5Mbytes/sec DIGITAL PERIPHERALS - 64 Port I/O; All are 5V tolerant - Hardware SMBusTM (I2CTM Compatible), SPITM, and Two UART Serial Ports Available Concurrently - Programmable 16-bit Counter/Timer Array with 5 Capture/Compare Modules - 5 General Purpose 16-bit Counter/Timers - Dedicated Watch-Dog Timer; Bi-directional Reset CLOCK SOURCES - Internal Programmable Oscillator: 2-to-16MHz - External Oscillator: Crystal, RC, C, or Clock - Real-Time Clock Mode using Timer 3 or PCA SUPPLY VOLTAGE ........................ 2.7V to 3.6V - Typical Operating Current: 10mA @ 25MHz - Multiple Power Saving Sleep and Shutdown Modes 100-Pin TQFP (64-Pin Version Available) Temperature Range: –40°C to +85°C
標簽： C8051F020
上傳時間： 2013-10-12
上傳用戶：lalalal
目錄： 1. Character Type Functions － 字符類型函數 2. Standard C Input/Output Functions － 標準輸入輸出函數 3. Standard Library Functions － 標準庫和內存分配函數 4. Mathematical Functions － 數學函數 5. String Functions － 字符串函數 6. BCD Conversion Functions － BCD 轉換函數 7. Memory Access Functions － 存儲器訪問函數 8. Delay Functions － 延時函數 9. LCD Functions － LCD函數 10. LCD Functions for displays with 4x40 characters － 4×40 字符型LCD函數 11. LCD Functions for displays connected in 8 bit memory mapped mode －以8 位外部存儲 器模式接口的LCD顯示函數 12. I2C Bus Functions － I2C 總線函數 13. National Semiconductor LM75 Temperature Sensor Functions － LM75 溫度傳感器函數 14. Dallas Semiconductor DS1621 Thermometer/Thermostat Functions － DS1621 溫度計函 數 15. Philips PCF8563 Real Time Clock Functions － PCF8563 實時時鐘函數 16. Philips PCF8583 Real Time Clock Functions － PCF8583 實時時鐘函數 17. Dallas Semiconductor DS1302 Real Time Clock Functions － DS1302 實時時鐘函數 18. Dallas Semiconductor DS1307 Real Time Clock Functions － DS1307 實時時鐘函數 19. 1 Wire Protocol Functions － 單線通訊協議函數 20. Dallas Semiconductor DS1820/DS1822 Temperature Sensors Functions － DS1820/1822 溫度傳感器函數 21. SPI Functions － SPI 函數 22. Power Management Functions － 電源管理函數 23. Gray Code Conversion Functions － 格雷碼轉換函數
標簽： AVR 庫函數
上傳時間： 2013-10-22
上傳用戶：歸海惜雪
在深入了解Flash存儲器的基礎上，采用單片機自動檢測存儲器無效塊。主要通過讀取每一塊的第1、第2頁內容，判斷該塊的好壞，并給出具體的實現過程，以及部分關鍵的電路原理圖和C語言程序代碼。該設計最終實現單片機自動檢測Flash壞塊的功能，并通過讀取ID號檢測Flash的性能，同時該設計能夠存儲和讀取1GB數據。 Abstract: On the basis of in-depth understanding the Flash chips，this paper designs a new program which using the SCM to detect the invalid block.Mainly through reading the data of the first and second page to detect the invalid block.Specific implementation procedure was given,and the key circuit schematic diagram and C language program code was introduced.This design achieved the function of using the MCU checks the invalid block finally，and increased the function by reading the ID number of Flash to get the performance of the memory.And the design also can write and read1GB data
標簽： Flash 單片機 存儲器 自動檢測
上傳時間： 2013-10-25
上傳用戶：taozhihua1314
介紹基于VHDL的微型打印機控制器的設計。論述了微型打印機的基本原理，以及實現控制器的VHDL語言設計。打印機的數據來自系統中的存儲模塊，根據需要控制打印。該微型打印機控制器可取代傳統的微型打印機,且抗干擾性好,可靠性高，具有較強的移植性，稍加改動就可應用于不同場合。 Abstract: This paper introduced the design method of micro printer controller based on VHDL.The basic principles of microprinter is explained,as well as the realization of the controller by VHDL language.The printer data is from the system memory modules,can control printer.The design of microprinter controller has antigood and high reliability，it can replace the traditional printer.The controller has very good portability,and need little modify that can use in different situation.
標簽： VHDL 微型打印機 制器設計
上傳時間： 2013-11-03
上傳用戶：dudu1210004
提出一種基于單片機AT89C51SND1C的MP3播放系統的設計方案。單片機集成了專用的解碼器，使用K9F1208閃存作為外存儲器，放音電路采用CS4330，存儲文件通過播放器上的USB接口設備從PC機上直接下載，液晶顯示采用LCD1602。方案設計簡單，性價比高，低功耗，易擴展。由于采用的是通用單片機實現的，可以很容易地移植到其他微控制器系統中，有很強的市場競爭能力和實用價值。 Abstract: A MP3 player design based on microchip AT89C51SND1C was presented, which used K9F1208 Flash chip as the memory circuit and used CS4330 as play chip. Storage files were download from PC through USB interfaces player on the device，and the LCD/602 was used as display screen. This system had characteristics of simple design,low power,easy expand，low cost and high recognition. Using of universual microchip make it easy to transplant to other microcontrol system，and have strong market competitiom and practical value.
上傳時間： 2014-12-27
上傳用戶：佳期如夢
蟲蟲下載站版權所有 京ICP備2021023401號-1
<input id="gymk4"></input>