The P82B96 offers many different ways in which it can be used as abus interface. In its simplest application it can be used as aninterface between bus systems operating from different supplyvoltages. Opto isolation between two bus systems is possible, andalso the availability of the Tx and Rx signals permits interfacing ofthe P82B96 with other bus systems which separate the forwardoutput path, from the backward input signal path.
上傳時間： 2013-10-11
上傳用戶：洛木卓
多功能高集成外圍器件6. 1 多功能高集成外圍器件82371PCI的英文名稱：Peripheral Component Interconnect （外圍部件互聯PCI總線）；82371是PCI總線組件。ISA是：Industry Standard Architecture（工業標準體系結構）IDE是 （Integrated Device Electronics）集成電路設備簡稱PIIX4PIIX4器件（芯片）的特點1、是一種支持Pentium和PentiumII微處理器的部件。2、82371對ISA橋來說，是一種多功能PCI總線。3、對可移動性和桌面深綠色環境均提供支持。4、電源管理邏輯。5、被集成化的IDE控制器。6、增強了性能的DMA控制器。 （7）基于兩個82C59的中斷控制器。（8）基于82C54芯片的定時器。（9）USB（Universal Serial Bus）通用串行總線。（10）SMBus系統管理總線。（11）實時時鐘（12）順應Microsoft Win95所需的功能其芯片的邏輯框圖如圖6-1所示。 PIIX4芯片邏輯框圖6.1.1 概述PIIX4芯片是一個多功能的PCI器件，圖6-2 是82371在系統中扮演的角色。（續上圖）1. PCI與EIO之間的橋（PIIX4芯片）橋是不對程的，是各類不同標準總線與PCI總線連接，82371AB橋也可理解為一種總線轉換譯碼器和控制器，橋內包含復雜的協議總線信號和緩沖器。(1).在PCI系統內，當PIIX4操作時，它總是作為系統內各種模塊的主控設備，如USB和DMA控制器、IDE總線和分布式DMA的主控設備等，而且總是以ISA主控設備的名義出現。(2). 在向ISA總線或IDE總線進行傳送操作的傳送周期期間作為從屬設備使用，并對內部寄存器譯碼。PIIX4芯片（橋）的配置(1).可以把PIIX4芯片配置成整個ISA總線，或ISA總線的子集，也可擴展成EIO總線。在使用EIO總線時，可以把未使用的信號配置成通用的輸入和輸出。(2).PIIX4可直接驅動5個ISA插槽；(3).能提供字節-交換邏輯、I/O的恢復支持、等待狀態的生成以及SYSCLK的生成。(4).提供X-BUS鍵盤控制器芯片、BIOS芯片、實時時鐘芯片、二級微程序器等的選擇。2. IDE接口（總線主控設備的權利和同步DMA方式）IDE接口為4個IDE的設備提供支持，比如IDE接口的硬盤和CD-ROM等。注意：目前硬盤接口有5類：IDE、SCSI、Fibre Channel、IEEE1394和USB等。IDE口幾乎在PC機最多，因為便宜。SCSI多用于服務器和集群機。IDE的PIO IDE速率：14MB/s；而總線主控設備IDE的速率：33MB/s在PIIX4芯片的IDE系統內，配有兩個各次獨立的IDE信號通道。3. 具有兼容性的模塊—DMA、定時器/計數器、中斷控制器等（1）在PIIX4內的兩各82C37 DMA控制器經邏輯的組合，產生7個獨立的可編程通道。通道[0：3]是通過與8個二進位的硬件連線實現的。通過以字節為單位的計數進行傳送。而通道[5：7]是通過16個二進位的連線實現的，以字為單位的計數進行傳送。（2）DMA控制器還能通過PCI總線，處理舊的DMA的兩個不同的方法提供支持。（3）計數/定時器模塊在功能上與82C54等價。（4）中斷控制器與ISA兼容，其功能是兩個82C59的功能之和。
上傳時間： 2013-11-19
上傳用戶：3到15
Internal Interrupts are used to respond to asynchronous requests from a certain part of themicrocontroller that needs to be serviced. Each peripheral in the TriCore as well as theBus Control Unit, the Debug Unit, the Peripheral Control Processor (PCP) and the CPUitself can generate an Interrupt Request.So what is an external Interrupt?An external Interrupt is something alike as the internal Interrupt. The difference is that anexternal Interrupt request is caused by an external event. Normally this would be a pulseon Port0 or Port1, but it can be even a signal from the input buffer of the SSC, indicatingthat a service is requested.The User’s Manual does not explain this aspect in detail so this ApNote will explain themost common form of an external Interrupt request. This ApNote will show that there is aneasy way to react on a pulse on Port0 or Port1 and to create with this impulse an InterruptService Request. Later in the second part of the document, you can find hints on how todebounce impulses to enable the use of a simple switch as the input device.Note: You will find additional information on how to setup the Interrupt System in theApNote “First steps through the TriCore Interrupt System” (AP3222xx)1. It would gobeyond the scope of this document to explain this here, but you will find selfexplanatoryexamples later on.
上傳時間： 2013-10-27
上傳用戶：zhangyigenius
The 87LPC76X Microcontroller combines in a small package thebenefits of a high-performance microcontroller with on-boardhardware supporting the Inter-Integrated Circuit (I2C) bus interface.The 87LPC76X can be programmed both as an I2C bus master, aslave, or both. An overview of the I2C bus and description of the bussupport hardware in the 87LPC76X microcontrollers appears inapplication note AN464, Using the 87LPC76X Microcontroller as anI2C Bus Master. That application note includes a programmingexample, demonstrating a bus-master code. Here we show anexample of programming the microcontroller as an I2C slave.The code listing demonstrates communications routines for the87LPC76X as a slave on the I2C bus. It compliments the program inAN464 which demonstrates the 87LPC76X as an I2C bus master.One may demonstrate two 87LPC76X devices communicating witheach other on the I2C bus, using the AN464 code in one, and theprogram presented here in the other. The examples presented hereand in AN464 allow the 87LPC76X to be either a master or a slave,but not both. Switching between master and slave roles in amultimaster environment is described in application note AN435.The software for a slave on the bus is relatively simple, as theprocessor plays a relatively passive role. It does not initiate bustransfers on its own, but responds to a master initiating thecommunications. This is true whether the slave receives or transmitsdata—transmission takes place only as a response to a busmaster’s request. The slave does not have to worry about arbitrationor about devices which do not acknowledge their address. As theslave is not supposed to take control of the bus, we do not demandit to resolve bus exceptions or “hangups”. If the bus becomesinactive the processor simply withdraws, not interfering with themaster (or masters) on the bus which should (hopefully) try toresolve the situation.
上傳時間： 2013-11-19
上傳用戶：shirleyYim
計算機部件要具有通用性，適應不同系統與不同用戶的需求，設計必須模塊化。計算機部件產品(模塊)供應出現多元化。模塊之間的聯接關系要標準化，使模塊具有通用性。模塊設計必須基于一種大多數廠商認可的模塊聯接關系，即一種總線標準。總線的標準總線是一類信號線的集合是模塊間傳輸信息的公共通道，通過它，計算機各部件間可進行各種數據和命令的傳送。為使不同供應商的產品間能夠互換，給用戶更多的選擇，總線的技術規范要標準化。總線的標準制定要經周密考慮，要有嚴格的規定。總線標準（技術規范）包括以下幾部分：機械結構規范：模塊尺寸、總線插頭、總線接插件以及按裝尺寸均有統一規定。功能規范：總線每條信號線（引腳的名稱）、功能以及工作過程要有統一規定。電氣規范：總線每條信號線的有效電平、動態轉換時間、負載能力等。總線的發展情況S-100總線：產生于1975年，第一個標準化總線，為微計算機技術發展起到了推動作用。IBM-PC個人計算機采用總線結構（Industry Standard Architecture, ISA)并成為工業化的標準。先后出現8位ISA總線、16位ISA總線以及后來兼容廠商推出的EISA（Extended ISA)32位ISA總線。為了適應微處理器性能的提高及I/O模塊更高吞吐率的要求，出現了VL-Bus(VESA Local Bus)和PCI(Peripheral Component Interconnect,PCI）總線。適合小型化要求的PCMCIA(Personal Computer Memory Card International Association)總線，用于筆記本計算機的功能擴展。總線的指標計算機主機性能迅速提高,各功能模塊性能也要相應提高,這對總線性能提出更高的要求。總線主要技術指標有幾方面：總線寬度：一次操作可以傳輸的數據位數，如S100為8位，ISA為16位，EISA為32位，PCI-2可達64位。總線寬度不會超過微處理器外部數據總線的寬度。總數工作頻率：總線信號中有一個CLK時鐘，CLK越高每秒鐘傳輸的數據量越大。ISA、EISA為8MHz，PCI為33.3MHz, PCI-2可達達66.6MHz。單個數據傳輸周期：不同的傳輸方式，每個數據傳輸所用CLK周期數不同。ISA要2個，PCI用1個CLK周期。這決定總線最高數據傳輸率。5. 總線的分類與層次系統總線：是微處理器芯片對外引線信號的延伸或映射，是微處理器與片外存儲器及I/0接口傳輸信息的通路。系統總線信號按功能可分為三類：地址總線（Where）：指出數據的來源與去向。地址總線的位數決定了存儲空間的大小。系統總線：數據總線（What）提供模塊間傳輸數據的路徑，數據總線的位數決定微處理器結構的復雜度及總體性能。控制總線（When）：提供系統操作所必需的控制信號，對操作過程進行控制與定時。擴充總線：亦稱設備總線，用于系統I/O擴充。與系統總線工作頻率不同，經接口電路對系統總統信號緩沖、變換、隔離，進行不同層次的操作（ISA、EISA、MCA)局部總線：擴充總線不能滿足高性能設備（圖形、視頻、網絡）接口的要求，在系統總線與擴充總線之間插入一層總線。由于它經橋接器與系統總線直接相連，因此稱之為局部總線（PCI）。
上傳時間： 2013-11-09
上傳用戶：nshark
中文版詳情瀏覽：http://www.elecfans.com/emb/fpga/20130715324029.html Xilinx UltraScale:The Next-Generation Architecture for Your Next-Generation Architecture The Xilinx® UltraScale™ architecture delivers unprecedented levels of integration and capability with ASIC-class system- level performance for the most demanding applications. The UltraScale architecture is the industr y's f irst application of leading-edge ASIC architectural enhancements in an All Programmable architecture that scales from 20 nm planar through 16 nm FinFET technologies and beyond, in addition to scaling from monolithic through 3D ICs. Through analytical co-optimization with the X ilinx V ivado® Design Suite, the UltraScale architecture provides massive routing capacity while intelligently resolving typical bottlenecks in ways never before possible. This design synergy achieves greater than 90% utilization with no performance degradation. Some of the UltraScale architecture breakthroughs include: • Strategic placement (virtually anywhere on the die) of ASIC-like system clocks, reducing clock skew by up to 50% • Latency-producing pipelining is virtually unnecessary in systems with massively parallel bus architecture, increasing system speed and capability • Potential timing-closure problems and interconnect bottlenecks are eliminated, even in systems requiring 90% or more resource utilization • 3D IC integration makes it possible to build larger devices one process generation ahead of the current industr y standard • Greatly increased system performance, including multi-gigabit serial transceivers, I/O, and memor y bandwidth is available within even smaller system power budgets • Greatly enhanced DSP and packet handling The Xilinx UltraScale architecture opens up whole new dimensions for designers of ultra-high-capacity solutions.
標簽： UltraScale Xilinx 架構
上傳時間： 2013-11-13
上傳用戶：瓦力瓦力hong
This application note describes how to implement the Bus LVDS (BLVDS) interface in the supported Altera ® device families for high-performance multipoint applications. This application note also shows the performance analysis of a multipoint application with the Cyclone III BLVDS example.
標簽： Implementing LVDS 522 Bus
上傳時間： 2013-11-10
上傳用戶：frank1234
設計了一個工作在S波段矢量陣列的天線單元，利用HFSS軟件進行優化和仿真。實測結果表明，該天線在E面和H面的交叉極化電平分別小于-26 dB和-23 dB，兩個端口之間的隔離度大于32 dB。該數據滿足組成矢量陣列的要求。
上傳時間： 2013-11-17
上傳用戶：朗朗乾坤
針對電液比例位置控制系統由于非線性和死區特性在實際控制中難以得到滿意的控制效果的現狀，本研究采用T-S模糊控制理論的原理設計了T-S模糊控制器對電液比例位置控制系統進行控制。并以Matlab為平臺進行了仿真實驗。仿真結果表明采用T-S模糊控制的電液比例位置控制系統具有較好的控制效果
上傳時間： 2013-11-13
上傳用戶：daoxiang126
Bus Hound硬件開發的必備工具，這個是教程喲
上傳時間： 2013-11-14
上傳用戶：1051290259
