匯編器在微處理器的驗證和應用中舉足輕重，如何設計通用的匯編器一直是研究的熱點之一。本文提出了一種開放式的匯編器系統設計思想，在匯編語言與機器語言間插入中間代碼CMDL（code mapping description language）語言，打破匯編語言與機器語言的直接映射關系，由此建立起一套描述匯編語言與機器語言的開放式映射體系?；诖碎_(kāi)放式映射體系開發了一套匯編器系統，具有較高層次上的通用性和可移植性?！娟P(guān)鍵詞】指令集，CMDL，匯編器，開放式 Design of Retargetable Assembler System Liu Ling Feng Wen Nan Wang Ying Chun Jiang An Ping Ji Li Jiu IME of Peking University, 100871【摘要】An assembler plays a very important role in the field of microprocessor verifications and applications, thus how to build a retargetable assembler system has been a hotspot in this field for long time. This paper presents a new method about the retargetable assembler system design.It provides a kind of language CMDL, code mapping description language. During the process of assembling, assembler languages are firstly translated to CMDL, and then mapped to the machine codes. In an other word, CMDL is inserted between assembler languages and machine codes during the translation procedure. As a medium code, CMDL has a lot of features, such as high extraction, strong descript capabilities. It can describe almost all attributes of assembler languages. By breaking the direct mapping relationship between assembler languages and machine codes, the complexities of machine codes are hided to the users, therefore, the new retargetable assembler system has higher retargetable level by converting the mapping from assembler languages and machine codes to assembler languages and CMDL, and implementationof it becomes easier. Based on the new mapping system structure, a retargetable assemblersystem is developed. It proved the whole system has good retargetability and implantability.【關鍵詞】instruction set, symbol table, assembler, lexical analysis, retargetability
上傳時間： 2013-10-10
上傳用戶：meiguiweishi
The Philips family of Multiplexers and Switches consists of bi-directional translating switches controlled via the I2C or SMBus to fan out an upstream SCL/SDA pair to 2, 4 or 8 downstream channels of SCx/SDx pairs. The Multiplexers allow only one downstream channel to be selected at a time, while the Switches allow any individual downstream channel or combination of downstream channels to be selected, depending on the content of the programmable control register. Once one or several channels have been selected, the device acts as a wire, allowing the master on the upstream channel to send commands to devices on all the active downstream channels, and devices on the active downstream channels to communicate with each other and the master. External pull-up resistors are used to pull each individual channel up to the desired voltage level. Combined interrupt output and hardware reset input are device options that are featured.
上傳時間： 2013-10-11
上傳用戶：dianxin61
摘要：本水位監測報警器使用5V低壓直流電源（也可以用3節5號電池代替）就可以對5~15厘米的水位進行監測，用LED顯示和數碼管顯示水位，并可以對不再此范圍內的水位發出報警。主要采用CD4066、74LS86、74LS32、CD4511芯片，再加上數碼管、蜂鳴器、發光二極管、電阻這些器件組成一個簡單而靈敏的監測報警電路，操作簡單，接通電源即可工作。因?yàn)榇蟛糠蛛娐凡捎脭?shù)字電路，所以本水位監測報警器還具有耗能低、準確性高的特點。關鍵字：譯碼電路 報警電路 監測電路 Abstract: The water level alarm monitoring the use of 5 V low-voltage DC power (can also use three batteries replaced on the 5th) will be able to 5 to 15 centimeters of water level monitoring, with LED display and digital display of water level, and this can no longer Within the scope of a water level alarm. Mainly CD4066, 74LS86, 74LS32, CD4511 chips, coupled with digital control, buzzer, light-emitting diode, the resistance of these devices composed of a simple and sensitive monitoring alarm circuits. Because the majority of circuits using digital circuitry, so the water level monitored alarm system also has low energy consumption, high accuracy of the characteristics. Keyword: Decoding circuit alarm circuit monitoring circuit
標簽： 水位 監測報警 系統原理
上傳時間： 2013-11-05
上傳用戶：王慶才
The solution presented in this paper and in the attached source files emulates the mostimportant SSC functions by using SW routines implemented in C. The code is focused onthe SAB C513, but will fit to all C500 derivatives.Beyond the low level software drivers a test shell is delivered. This shell allows a quicktest of the software drivers by an emulator or a starter kit demo board.
上傳時間： 2013-11-24
上傳用戶：363186
All inputs of the C16x family have Schmitt-Trigger input characteristics. These Schmitt-Triggers are intended to always provide proper internal low and high levels, even if anundefined voltage level (between TTL-VIL and TTL-VIH) is externally applied to the pin.The hysteresis of these inputs, however, is very small, and can not be properly used in anapplication to suppress signal noise, and to shape slow rising/falling input transitions.Thus, it must be taken care that rising/falling input signals pass the undefined area of theTTL-specification between VIL and VIH with a sufficient rise/fall time, as generally usualand specified for TTL components (e.g. 74LS series: gates 1V/us, clock inputs 20V/us).The effect of the implemented Schmitt-Trigger is that even if the input signal remains inthe undefined area, well defined low/high levels are generated internally. Note that allinput signals are evaluated at specific sample points (depending on the input and theperipheral function connected to it), at that signal transitions are detected if twoconsecutive samples show different levels. Thus, only the current level of an input signalat these sample points is relevant, that means, the necessary rise/fall times of the inputsignal is only dependant on the sample rate, that is the distance in time between twoconsecutive evaluation time points. If an input signal, for instance, is sampled throughsoftware every 10us, it is irrelevant, which input level would be seen between thesamples. Thus, it would be allowable for the signal to take 10us to pass through theundefined area. Due to the sample rate of 10us, it is assured that only one sample canoccur while the signal is within the undefined area, and no incorrect transition will bedetected. For inputs which are connected to a peripheral function, e.g. capture inputs, thesample rate is determined by the clock cycle of the peripheral unit. In the case of theCAPCOM unit this means a sample rate of 400ns @ 20MHz CPU clock. This requiresinput signals to pass through the undefined area within these 400ns in order to avoidmultiple capture events.For input signals, which do not provide the required rise/fall times, external circuitry mustbe used to shape the signal transitions.In the attached diagram, the effect of the sample rate is shown. The numbers 1 to 5 in thediagram represent possible sample points. Waveform a) shows the result if the inputsignal transition time through the undefined TTL-level area is less than the time distancebetween the sample points (sampling at 1, 2, 3, and 4). Waveform b) can be the result ifthe sampling is performed more than once within the undefined area (sampling at 1, 2, 5,3, and 4).Sample points:1. Evaluation of the signal clearly results in a low level2. Either a low or a high level can be sampled here. If low is sampled, no transition willbe detected. If the sample results in a high level, a transition is detected, and anappropriate action (e.g. capture) might take place.3. Evaluation here clearly results in a high level. If the previous sample 2) had alreadydetected a high, there is no change. If the previous sample 2) showed a low, atransition from low to high is detected now.
標簽： Signal Input Fall Rise
上傳時間： 2013-10-23
上傳用戶：copu
All inputs of the C16x family have Schmitt-Trigger input characteristics. These Schmitt-Triggers are intended to always provide proper internal low and high levels, even if anundefined voltage level (between TTL-VIL and TTL-VIH) is externally applied to the pin.The hysteresis of these inputs, however, is very small, and can not be properly used in anapplication to suppress signal noise, and to shape slow rising/falling input transitions.Thus, it must be taken care that rising/falling input signals pass the undefined area of theTTL-specification between VIL and VIH with a sufficient rise/fall time, as generally usualand specified for TTL components (e.g. 74LS series: gates 1V/us, clock inputs 20V/us).The effect of the implemented Schmitt-Trigger is that even if the input signal remains inthe undefined area, well defined low/high levels are generated internally. Note that allinput signals are evaluated at specific sample points (depending on the input and theperipheral function connected to it), at that signal transitions are detected if twoconsecutive samples show different levels. Thus, only the current level of an input signalat these sample points is relevant, that means, the necessary rise/fall times of the inputsignal is only dependant on the sample rate, that is the distance in time between twoconsecutive evaluation time points. If an input signal, for instance, is sampled throughsoftware every 10us, it is irrelevant, which input level would be seen between thesamples. Thus, it would be allowable for the signal to take 10us to pass through theundefined area. Due to the sample rate of 10us, it is assured that only one sample canoccur while the signal is within the undefined area, and no incorrect transition will bedetected. For inputs which are connected to a peripheral function, e.g. capture inputs, thesample rate is determined by the clock cycle of the peripheral unit. In the case of theCAPCOM unit this means a sample rate of 400ns @ 20MHz CPU clock. This requiresinput signals to pass through the undefined area within these 400ns in order to avoidmultiple capture events.
標簽： C16x 微控制器 輸入信號 時序圖
上傳時間： 2014-04-02
上傳用戶：han_zh
CAN與RS232轉換節點的設計與實現 介紹將CAN總線接口與RS232總線接口相互轉換的設計方法和2種總線電平轉換關系，實現CAN總線與各模塊的接口設計，制定了相應的軟硬件設計方案，并給出軟件設計流程圖以及部分硬件設計原理圖。為CAN總線與RS232總線互聯提供了一種方法，對CAN總線與RS232總線接口設備的互聯和廣泛應用的實現具有重要意義。關鍵詞：CAN總線；RS-232總線；串行通信Design and Realization of CAN and RS232 Transformation NodeZHOU Wei, CHENG Xiao-hong(Information Institute, Wuhan University of Technology, Wuhan 430070)【Abstract】This paper introduces one design method of the CAN bus interface and the RS232 bus interface interconversion, emphasizes two kindof bus level transformation relations, realizes the CAN bus and various modules connection design, formulates the design proposal of correspondingsoftware and hardware, and gives the flow chart of software design as well as the partial schematic diagram of hardware design. It providesonemethod for the CAN bus and the RS232 bus interconnection, has the vital significance to widespread application realization of the CAN busand theRS232 bus interface equipment interconnection.【Key words】CAN bus; RS-232 bus; serial communication
標簽： CAN 232 RS 轉換
上傳時間： 2013-11-04
上傳用戶：leesuper
九.輸入/輸出保護為了支持多任務，80386不僅要有效地實現任務隔離，而且還要有效地控制各任務的輸入/輸出，避免輸入/輸出沖突。本文將介紹輸入輸出保護。 這里下載本文源代碼。 <一>輸入/輸出保護80386采用I/O特權級IPOL和I/O許可位圖的方法來控制輸入/輸出，實現輸入/輸出保護。 1.I/O敏感指令輸入輸出特權級(I/O Privilege Level)規定了可以執行所有與I/O相關的指令和訪問I/O空間中所有地址的最外層特權級。IOPL的值在如下圖所示的標志寄存器中。 標 志寄存器 BIT31—BIT18 BIT17 BIT16 BIT15 BIT14 BIT13—BIT12 BIT11 BIT10 BIT9 BIT8 BIT7 BIT6 BIT5 BIT4 BIT3 BIT2 BIT1 BIT0 00000000000000 VM RF 0 NT IOPL OF DF IF TF SF ZF 0 AF 0 PF 1 CF I/O許可位圖規定了I/O空間中的哪些地址可以由在任何特權級執行的程序所訪問。I/O許可位圖在任務狀態段TSS中。 I/O敏感指令 指令 功能 保護方式下的執行條件 CLI 清除EFLAGS中的IF位 CPL<=IOPL STI 設置EFLAGS中的IF位 CPL<=IOPL IN 從I/O地址讀出數據 CPL<=IOPL或I/O位圖許可 INS 從I/O地址讀出字符串 CPL<=IOPL或I/O位圖許可 OUT 向I/O地址寫數據 CPL<=IOPL或I/O位圖許可 OUTS 向I/O地址寫字符串 CPL<=IOPL或I/O位圖許可 上表所列指令稱為I/O敏感指令，由于這些指令與I/O有關，并且只有在滿足所列條件時才可以執行，所以把它們稱為I/O敏感指令。從表中可見，當前特權級不在I/O特權級外層時，可以正常執行所列的全部I/O敏感指令；當特權級在I/O特權級外層時，執行CLI和STI指令將引起通用保護異常，而其它四條指令是否能夠被執行要根據訪問的I/O地址及I/O許可位圖情況而定(在下面論述)，如果條件不滿足而執行，那么將引起出錯碼為0的通用保護異常。 由于每個任務使用各自的EFLAGS值和擁有自己的TSS，所以每個任務可以有不同的IOPL，并且可以定義不同的I/O許可位圖。注意，這些I/O敏感指令在實模式下總是可執行的。 2.I/O許可位圖如果只用IOPL限制I/O指令的執行是很不方便的，不能滿足實際要求需要。因?yàn)檫@樣做會使得在特權級3執行的應用程序要么可訪問所有I/O地址，要么不可訪問所有I/O地址。實際需要與此剛好相反，只允許任務甲的應用程序訪問部分I/O地址，只允許任務乙的應用程序訪問另一部分I/O地址，以避免任務甲和任務乙在訪問I/O地址時發生沖突，從而避免任務甲和任務乙使用使用獨享設備時發生沖突。 因此，在IOPL的基礎上又采用了I/O許可位圖。I/O許可位圖由二進制位串組成。位串中的每一位依次對應一個I/O地址，位串的第0位對應I/O地址0，位串的第n位對應I/O地址n。如果位串中的第位為0，那么對應的I/O地址m可以由在任何特權級執行的程序訪問；否則對應的I/O地址m只能由在IOPL特權級或更內層特權級執行的程序訪問。如果在I/O外層特權級執行的程序訪問位串中位值為1的位所對應的I/O地址，那么將引起通用保護異常。 I/O地址空間按字節進行編址。一條I/O指令最多可涉及四個I/O地址。在需要根據I/O位圖決定是否可訪問I/O地址的情況下，當一條I/O指令涉及多個I/O地址時，只有這多個I/O地址所對應的I/O許可位圖中的位都為0時，該I/O指令才能被正常執行，如果對應位中任一位為1，就會引起通用保護異常。 80386支持的I/O地址空間大小是64K，所以構成I/O許可位圖的二進制位串最大長度是64K個位，即位圖的有效部分最大為8K字節。一個任務實際需要使用的I/O許可位圖大小通常要遠小于這個數目。 當前任務使用的I/O許可位圖存儲在當前任務TSS中低端的64K字節內。I/O許可位圖總以字節為單位存儲，所以位串所含的位數總被認為是8的倍數。從前文中所述的TSS格式可見，TSS內偏移66H的字確定I/O許可位圖的開始偏移。由于I/O許可位圖最長可達8K字節，所以開始偏移應小于56K，但必須大于等于104，因?yàn)門SS中前104字節為T(mén)SS的固定格式，用于保存任務的狀態。 1.I/O訪問許可檢查細節保護模式下處理器在執行I/O指令時進行許可檢查的細節如下所示。 (1)若CPL<=IOPL，則直接轉步驟(8)；(2)取得I/O位圖開始偏移；(3)計算I/O地址對應位所在字節在I/O許可位圖內的偏移；(4)計算位偏移以形成屏蔽碼值，即計算I/O地址對應位在字節中的第幾位；(5)把字節偏移加上位圖開始偏移，再加1，所得值與TSS界限比較，若越界，則產生出錯碼為0的通用保護故障；(6)若不越界，則從位圖中讀對應字節及下一個字節；(7)把讀出的兩個字節與屏蔽碼進行與運算，若結果不為0表示檢查未通過，則產生出錯碼為0的通用保護故障；(8)進行I/O訪問。設某一任務的TSS段如下： TSSSEG SEGMENT PARA USE16 TSS <> ;TSS低端固定格式部分 DB 8 DUP(0) ;對應I/O端口00H—3FH DB 10000000B ;對應I/O端口40H—47H DB 01100000B ;對用I/O端口48H—4FH DB 8182 DUP(0ffH) ;對應I/O端口50H—0FFFFH DB 0FFH ;位圖結束字節TSSLen = $TSSSEG ENDS 再假設IOPL=1，CPL=3。那么如下I/O指令有些能正常執行，有些會引起通用保護異常： in al,21h ;(1)正常執行 in al,47h ;(2)引起異常 out 20h,al ;(3)正常實行 out 4eh,al ;(4)引起異常 in al,20h ;(5)正常執行 out 20h,eax ;(6)正常執行 out 4ch,ax ;(7)引起異常 in ax,46h ;(8)引起異常 in eax,42h ;(9)正常執行 由上述I/O許可檢查的細節可見，不論是否必要，當進行許可位檢查時，80386總是從I/O許可位圖中讀取兩個字節。目的是為了盡快地執行I/O許可檢查。一方面，常常要讀取I/O許可位圖的兩個字節。例如，上面的第(8)條指令要對I/O位圖中的兩個位進行檢查，其低位是某個字節的最高位，高位是下一個字節的最低位。可見即使只要檢查兩個位，也可能需要讀取兩個字節。另一方面，最多檢查四個連續的位，即最多也只需讀取兩個字節。所以每次要讀取兩個字節。這也是在判別是否越界時再加1的原因。為此，為了避免在讀取I/O許可位圖的最高字節時產生越界，必須在I/O許可位圖的最后填加一個全1的字節，即0FFH。此全1的字節應填加在最后一個位圖字節之后，TSS界限范圍之前，即讓填加的全1字節在TSS界限之內。 I/O許可位圖開始偏移加8K所得的值與TSS界限值二者中較小的值決定I/O許可位圖的末端。當TSS的界限大于I/O許可位圖開始偏移加8K時，I/O許可位圖的有效部分就有8K字節，I/O許可檢查全部根據全部根據該位圖進行。當TSS的界限不大于I/O許可位圖開始偏移加8K時，I/O許可位圖有效部分就不到8K字節，于是對較小I/O地址訪問的許可檢查根據位圖進行，而對較大I/O地址訪問的許可檢查總被認為不可訪問而引起通用保護故障。因?yàn)檫@時會發生字節越界而引起通用保護異常，所以在這種情況下，可認為不足的I/O許可位圖的高端部分全為1。利用這個特點，可大大節約TSS中I/O許可位圖占用的存儲單元，也就大大減小了TSS段的長度。 <二>重要標志保護輸入輸出的保護與存儲在標志寄存器EFLAGS中的IOPL密切相關，顯然不能允許隨便地改變IOPL，否則就不能有效地實現輸入輸出保護。類似地，對EFLAGS中的IF位也必須加以保護，否則CLI和STI作為敏感指令對待是無意義的。此外，EFLAGS中的VM位決定著處理器是否按虛擬8086方式工作。 80386對EFLAGS中的這三個字段的處理比較特殊，只有在較高特權級執行的程序才能執行IRET、POPF、CLI和STI等指令改變它們。下表列出了不同特權級下對這三個字段的處理情況。 不同特權級對標志寄存器特殊字段的處理 特權級 VM標志字段 IOPL標志字段 IF標志字段 CPL=0 可變(初POPF指令外) 可變 可變 0 不變 不變 可變 CPL>IOPL 不變 不變 不變 從表中可見，只有在特權級0執行的程序才可以修改IOPL位及VM位；只能由相對于IOPL同級或更內層特權級執行的程序才可以修改IF位。與CLI和STI指令不同，在特權級不滿足上述條件的情況下，當執行POPF指令和IRET指令時，如果試圖修改這些字段中的任何一個字段，并不引起異常，但試圖要修改的字段也未被修改，也不給出任何特別的信息。此外，指令POPF總不能改變VM位，而PUSHF指令所壓入的標志中的VM位總為0。 <三>演示輸入輸出保護的實例(實例九)下面給出一個用于演示輸入輸出保護的實例。演示內容包括：I/O許可位圖的作用、I/O敏感指令引起的異常和特權指令引起的異常；使用段間調用指令CALL通過任務門調用任務，實現任務嵌套。 1.演示步驟實例演示的內容比較豐富，具體演示步驟如下：(1)在實模式下做必要準備后，切換到保護模式；(2)進入保護模式的臨時代碼段后，把演示任務的TSS段描述符裝入TR，并設置演示任務的堆棧；(3)進入演示代碼段，演示代碼段的特權級是0；(4)通過任務門調用測試任務1。測試任務1能夠順利進行；(5)通過任務門調用測試任務2。測試任務2演示由于違反I/O許可位圖規定而導致通用保護異常；(6)通過任務門調用測試任務3。測試任務3演示I/O敏感指令如何引起通用保護異常；(7)通過任務門調用測試任務4。測試任務4演示特權指令如何引起通用保護異常；(8)從演示代碼轉臨時代碼，準備返回實模式；(9)返回實模式，并作結束處理。
上傳時間： 2013-12-11
上傳用戶：nunnzhy
設計一種應用于某全地形ATV車載武器裝置中的中控系統，該系統設計是以TMS320F2812型DSP為核心，采用模塊化設計思想，對其硬件部分進行系統設計，能夠完成對武器裝置高低、回轉方向的運動控制，實現靜止或行進狀態中對目標物的測距，自動瞄準以及按既定發射模式發射彈丸和各項安全性能檢測等功能。通過編制相應的軟件，對其進行系統調試，驗證了該設計運行穩定。 Abstract: A central control system applied to an ATV vehicle weapons is designed. The system design is based on TMS320F2812 DSP as the core， uses modular design for its hardware parts. The central control system can complete the motion control of the level of weapons and equipment， rotation direction， to achieve a state of static or moving objects on the target ranging， auto-targeting and according to the established target and the projectile and the launch of the security performance testing and other functions. Through the development of appropriate software and to carry out system testing to verify the stability of this design and operation.
標簽： ATV-ATT DSP 中控系統
上傳時間： 2013-11-02
上傳用戶：jshailingzzh
中文版詳情瀏覽：http://www.elecfans.com/emb/fpga/20130715324029.html Xilinx UltraScale:The Next-Generation Architecture for Your Next-Generation Architecture The Xilinx® UltraScale™ architecture delivers unprecedented levels of integration and capability with ASIC-class system- level performance for the most demanding applications. The UltraScale architecture is the industr y's f irst application of leading-edge ASIC architectural enhancements in an All Programmable architecture that scales from 20 nm planar through 16 nm FinFET technologies and beyond, in addition to scaling from monolithic through 3D ICs. Through analytical co-optimization with the X ilinx V ivado® Design Suite, the UltraScale architecture provides massive routing capacity while intelligently resolving typical bottlenecks in ways never before possible. This design synergy achieves greater than 90% utilization with no performance degradation. Some of the UltraScale architecture breakthroughs include: • Strategic placement (virtually anywhere on the die) of ASIC-like system clocks, reducing clock skew by up to 50% • Latency-producing pipelining is virtually unnecessary in systems with massively parallel bus architecture, increasing system speed and capability • Potential timing-closure problems and interconnect bottlenecks are eliminated, even in systems requiring 90% or more resource utilization • 3D IC integration makes it possible to build larger devices one process generation ahead of the current industr y standard • Greatly increased system performance, including multi-gigabit serial transceivers, I/O, and memor y bandwidth is available within even smaller system power budgets • Greatly enhanced DSP and packet handling The Xilinx UltraScale architecture opens up whole new dimensions for designers of ultra-high-capacity solutions.
標簽： UltraScale Xilinx 架構
上傳時間： 2013-11-13
上傳用戶：瓦力瓦力hong
蟲蟲下載站版權所有 京ICP備2021023401號-1
